http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승주,장동일,장홍희,Lee S.J.,Chang D.I.,Chang H.H. 한국축산환경학회 2006 축산시설환경학회지 Vol.12 No.1
국민의 소득 증대로 인해 육류 및 계란의 소비량이 점차적으로 증가하는 추세에 있다. 이로 인해 산란계사의 규모가 대형화됨에 따라 기계화되었고, 이 연구에서는 고단 직립식 케이지를 사용하는 무창계사에서 기계시설이 작동 시 발생되는 소음 및 진동이 산란계의 생산성에 미치는 영향을 구명하고자 산란계사내의 소음/진동 수준을 측정 분석하였다. 전국의 13개 산란계 농장을 대상으로 하여 평상시 및 기계시설(사료급이기, 사료분배기, 집란시스템, 환기장치, 계분벨트)의 작동시에 발생되는 소음/진동을 측정하였다. (1) 평상시 소음 최대 82dB, 진동 최대 0.2072 cm/s, (2) 사료급이기 작동 시 소음 최대 90dB, 최대 진동 2.8560cm/s, (3) 사료분배기 작동시 소음 최대 90dB, 최대 진동 2.022cm/s, (4) 집란시스템 작동 시 최대 소음 87dB, 최대 진동 0.1865cm/s, (5) 환기장치 작동 시 케이지에 미치는 최대 88dB, 계사 후면 벽면에 미치는 최대 진동 2.5364cm/s, (6) 계분벨트 작동 시 최대 소음 88dB, 최대 진동 0.2387cm/s 이었다. 따라서 산란계에게 직접적이고 가장 크게 영향을 미치는 장치는 급이 시스템이였다. 이 때의 소음은 최대 90dB로 가장 높게 발생하였으며, 진동은 최대 2.8560 cm/s 발생하였다. This study was carried out to measure and analyze the characteristics of noise and vibration, and to analyze their effects on the productivity of layers, mechanical troubles, and abnormal wear-out failure of facilities and equipment of the layer house. The measurements of noise and vibration were taken at 13 layer farms nationwide for the operations of feed supplier system, feed distribution system, automatic egg collection system, ventilation system, blot conveyer for layer feces, and fur the case of with and without their operation by a sound level meter and a vibration measuring system in the layer house equipped with upright multi-tier cages. Measurement results showed that normal times were noise(N) 82 dB and vibration(V) 0.2072 cm/s, feed supplier system were 90 dB(N) and 2.8560 cm/s(V), feed distribution system were 90 dB(N) and 2.0222 cm/s(V), automatic egg collection system were 87 dB(N) and 0.1865 cm/s(V), ventilation system 88 dB(N) and 2.5364 cm/s(V), belt conveyer fur layer feces were 88 dB(N) and 0.2387 cm/s(V), and then maximum values of noise and vibration were 90 dB and 2.8560 cm/s, respectively, when feeding systems(feed supplying system and feed distribution system) were operated. Based on these results, an experiment is being conducted to find out the effect of noise and vibration on the productivity of layers in the layer house equipped with upright multi-tier cages.
이승주,장동일,소재광,장홍희,윤택진,Lee, S.J.,Chang, D.I.,So, J.K.,Chang, H.H.,Yoon, T.J. 한국축산환경학회 2008 축산시설환경학회지 Vol.14 No.1
최근 한국의 국민 소득 증대로 인해 육류 및 계란의 소비량이 점차적으로 증가하여, 산란계사의 규모가 대형화됨에 따라 기계화되었고, 기계 시설의 소음/진동이 계사 내 가축의 생산능력에 직 간접적으로 영향을 미치는 영향에 대한 선행연구는 일부분에 국한되어 있다. 이에 본 연구에서는 계사내 기계장치 중 진동발생량이 가장 큰 호퍼식급이기의 진동으로 인한 공진을 미연에 방지하고자 진동모드 및 진동발생량을 계측 분석하였다. 이때 축은 급이기의 구동방향(X축), 케이지 방향(Y축) 및 급이기의 상하방향(Z축)으로 설정하였으며, 사료 충전율 0, 25, 50, 75, 100%인 지점에서 매달아서 계측하는 타격여진법을 응용하여 진동모드를 계측하였다. 획득한 데이터를 분석프로그램을 이용하여 분석한 결과, $30{\sim}500Hz$의 호퍼식 급이기 고유주파수를 구명하였고, 특히 170 Hz 이하의 낮은 주파수대에서는 전달율비가 대부분 높은 수준이었다. 이를 근거로 하여 30, 100, 170 Hz대의 호퍼식급이기 진동 시뮬레이션 분석을 실시하여 취약지점에 대한 분석을 실시하여 진동발생량 계측 지점으로 지정, 계측 분석을 실시하였다. 진동모드와 진동발생량 분석결과를 근거로 하여 호퍼식급이기가 산란계 산란율을 영향을 주는 수준의 진동을 발생시킴을 구명하였고, 각 취약지점에 대한 분석을 통하여 각 축별로 공진 및 제진/방진을 위한 방안 및 장치를 제시하였다. This study was carried out to measure and analyze the vibration levels and modes produced by a hopper type feeder used at laying hen farms, to prevent the vibration resonance and to reduce the vibration of the hopper type feeder (6-tier). The most vibration in a layer house were produced by hopper type feeder as shown the previous study. According to the measurement results, the ratio of transmissibility was as high as 100-638% for natural frequency of 170 Hz or less. And vibration simulations were taken by the results of vibration mode analysis and the weakest points to vibrations were determined accordingly. Then measurement and analysis were taken for those points. The quantities of vibration were 4.6354-4.9118 g($g=9.81^m/s^2$) by axis. In this study, it was found that hopper type feeder generated vibration as much as to influence the ratio of laying eggs of layer. And by the analysis of vibration on the weakest points, design methods and equipment were suggested for isolating/reducing of vibration by each axis.
비자성 소재 Ti-blade 선형 결함에 대한 위상 잠금 적외선열화상 적용을 통한 검출능 분석
김창선(C. S. Kim),이승주(S. J. Lee),김원태(W. T. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
발전용 터빈에서 증기 에너지를 최대한 활용하기 위해 보다 큰 Size 의 최종단 블레이드(Last Stage Blade, LSB)를 적용하는 추세이며, 그 크기가 증대됨으로서 침식, 부식, 과부하, 운전영향 및 외부 이물질 유입 등 LSB 의 손상 사고사례가 발생함으로 인해 LSB 에 대한 건전성 확보가 필요하다. Titanium 소재 저압터빈 로터의 LSB 경우 대표적인 비자성체 소재로서 현재 Blade Vane 을 포함한 표면 검사는 침투탐상검사(PT)를 적용한 비파괴검사가 주를 이루고 있으며, PT 는 검사 수행의 모든 단계에서 유해화학약품을 필요로 한다. 이에 따라 본 논문에서는 기존의 침투탐상 검사를 대체하기 위해 위상잠금 적외선열화상 기법을 적용하여 실제 발전소에서 취외한 Ti-LSB 에 가공된 다양한 깊이의 인공선형결함에 대해 각 결함 깊이간의 식별 여부를 확인하고 깊이를 구분해 낼 수 있는지를 분석대상으로 하였다. 인공선형결함에 대해 각각의 구역(Zone)을 설정하고 건전부 기준점과 결함부의 중심점을 위치 선정하여 4점 상관법에 의해 S1-S4 시점에서의 온도값을 기준으로 각 위치에서의 위상(φ)과 진폭(A)값을 산출하고 비교 분석하였다. 본 연구의 결과로서 플레이트 형태가 아닌 형상이 복잡한 Ti-blade 에서의 결함의 깊이에 따른 위상과 진폭 및 온도차와의 상관관계를 확인하여 결함의 비례성을 확인할 수 있었다.
논문 : 생물생산시설 및 환경공학 ; 소규모 복도-더그매 예열 음압환기방식 무창자돈사의 최적 환기 요건에 관한 연구
이승주 ( S. J. Lee ),장동일 ( D. I. Chang ),황선호 ( S. H. Hwang ),( W. M. Gutierrez ),장홍희 ( H. H. Chang ) 한국농업기계학회 2010 바이오시스템공학 Vol.35 No.6
This study was carried out to determine necessary conditions for optimal ventilation of small windowless piglet house (4.0 (W) × 11.0 (L) × 2.6(H) m) with corridor and attic for preheating using CFD (Computational Fluid Dynamics) simulation. The experimental weaning piglet house was consisted of a corridor, an attic, 4 rooms (3.0 (W) × 2.75(L) m), 3 fences (0.7(H) m), 5 air inlets and 2 exhaust fans (0.4 (D) m) and simulated using CFD code, FLUENT. The simulation results for the experimental weaning piglet house showed that each room was uniformly ventilated under all the experimental conditions and air velocities at 0.1 m above floor are less than 0.15 m/s for 0.75 m/s and 1.0 m/s of air inlet velocity but 0.61 m/s for 1.25 m/s. The simulation results are similar to the measured results. Considering the air flow pattern, ventilating efficiency, air velocity at 0.1 m above floor and cold stress of weaning piglets and so on, the optimum velocity of air inlet might be 1.0 m/s.