http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승규,이준환,이문식,S.Q. Lee,J.H. Lee,M.S. Lee 한국전자통신연구원 2024 전자통신동향분석 Vol.39 No.1
Virtualization technology supports the execution of software unrelated to the hardware environment through the decoupling of software and hardware. Additionally, it enables network slicing, allowing one physical device to be divided and used by a function or service by supporting sharing with isolation. Virtualization enables flexible platform use, allowing a variety of services to be launched without changes or additions to the hardware platform. We describe virtualization technology trends in satellite/mobile communication systems. Basic concepts and technical definitions are included, and the current status of research and development by domestic and foreign organizations, including the Electronics and Telecommunications Research Institute, is analyzed. Finally, future prospects and implications are discussed.
이승규,김민경,이연정,정석근,오미화,김동훈,박광욱,이완규,함준상,Lee, Seung-Gyu,Kim, Min-Kyung,Lee, Yeon-Jeong,Jeong, Seok-Geun,Oh, Mi-Hwa,Kim, Dong-Hun,Park, Kwang-Wook,Lee, Wan-Kyu,Ham, Jun-Sang 한국축산식품학회 2010 한국축산식품학회지 Vol.30 No.1
산양유의 체세포수는 측정방법에 따라 많은 차이가 보고되고 있으나 국제적인 표준방법으로 pyronin Y-methyl green stain에 의한 직접현미경법이 사용되고 있다. 8개 목장 총 48개 시료를 pyronin Y-methyl green stain에 의한 직접검경법, 국립축산과학원에서 보유중인 ADAM-SCC, 충청북도 축산위생연구소에서 보유중인 Somacount 500으로 측정하여 결과를 비교하였다. Pyronin Y-methyl green stain 측정시 전체 평균은 $7.3{\times}10^5$ cells/mL인 반면 ADAMSCC와 Somacaount 500은 각각 $4.9{\times}10^5$과 $11.6{\times}10^5$ cells/mL로 나타나 과소 또는 과대평가되는 결과를 보였다. 직접현미경법과 ADAM-SCC또는 Somacaount 500과의 상관계수는 각각 0.0332 또는 0.2285로 매우 낮으며 장비간의 상관계수도 0.1552로 매우 낮게 나타났다. 산양유의 체세 포수 저감을 위해서는 측정장비의 개발이 필요하며 장비를 표준화하기 위한 표준측정법으로 pyronin Y-methyl green stain의 채택이 필요하다.
이승규,신정우,김태욱,Lee, Seung-Gyu,Shin, Jeong-Woo,Kim, Tae-Uk 한국항공운항학회 2015 한국항공운항학회지 Vol.23 No.1
Because of kinematic complexities, nonlinear behavior, etc, the performance of oleo-pneumatic landing gear is predicted by qualified commercial softwares. While commercial softwares predict more exactly, it takes a long time to construct or modify a model. At initial design stage, design parameters can be determined quickly and exactly enough with simple 2 degree of freedom model of mass, spring and damping. 2 degree of freedom model can be easily applied to optimization and reliability analysis which takes repetitive computation. In this paper, oleo-pneumatic landing gear is modeled as a nonlinear 2 degree of freedom model. The analysis are compared with landing gear drop test. To determine design parameter, optimization problem is solved with genetic algorithm and 2 degree of freedom model.
마늘즙 첨가 요구르트의 품질특성 및 항생제 저항성 황색포도상구균 KCCM 40510 억제활성
이승규,이연정,김민경,한기성,정석근,장애라,채현석,김동훈,함준상,Lee, Seung-Gyu,Lee, Yeon-Jung,Kim, Min-Kyung,Han, Gi-Sung,Jeong, Seok-Geun,Jang, Ae-Ra,Chae, Hyun-Seok,Kim, Dong-Hun,Ham, Jun-Sang 한국축산식품학회 2009 한국축산식품학회지 Vol.29 No.4
This study was carried out to fortify the antimicrobial activity of yogurt by adding garlic juice to it. A raw garlic bulb was grated and heated with Glycyrrhiza uralensis to improve its antimicrobial activity and palatability. Yogurt was made with 0, 4, 8, and 12% garlic juice, and was evaluated in terms of its lactic starter growth, physico-chemical characteristics, growth inhibitory activity against Staphylococcus aureus KCCM 40510, and sensory characteristics. The garlic juice significantly increased the growth of the yogurt starter (p<0.05), which was highest with the addition of 4% garlic juice. Significant (p<0.05) inhibition of S. aureus KCCM 40510 occurred with the addition of 12% garlic juice. The preference was lowered with the addition of garlic juice, but the addition of 4% garlic juice showed no significant difference (p>0.05). To increase the antimicrobial activity of yogurt with the addition of garlic juice, further studies on the increase in the palatability of garlic juice are necessary.
한계상태식의 3차 다항식 근사를 통한 구조물 신뢰도 평가
이승규,김성찬,김태욱,Lee, Seung Gyu,Kim, Sung Chan,Kim, Tea Uk 한국전산구조공학회 2013 한국전산구조공학회논문집 Vol.26 No.3
본 논문에서는 불확실성을 확률변수로 가정하고 구조물의 파손기준을 한계상태식(Limit State Equation)으로 정의하였다. 한계상태식을 Fleishman의 3차 다항식으로 근사하고 이론적인 확률 모멘트(Moments)를 계산하였다. Fleishman은 표준정규 분포 확률변수에 대해서만 3차 다항식을 제시하였으나, 본 논문에서는 이를 확장하여 베타, 감마, 균일 분포 등 다양한 확률 변수에 적용하였다. 확률 모멘트를 계산하기 위해서 누률(Cumulants)과 정규화된 한계상태식을 활용하였으며, 피어슨 시스템(Pearson System)을 통해 한계상태식의 확률분포를 근사하였다. In this paper, uncertainties and failure criteria of structure are mathematically expressed by random variables and a limit state equation. A limit state equation is approximated by Fleishman's 3rd order polynomials and the theoretical moments of an approximated limit state equation are calculated. Fleishman introduced a 3rd order polynomial in terms of only standard normal distiribution random variables. But, in this paper, Fleishman's polynomial is extended to various random variables including beta, gamma, uniform distributions. Cumulants and a normalized limit state equation are used to calculate a theoretical moments of a limit state equation. A cumulative distribution function of a normalized limit state equation is approximated by a Pearson system.
이승규,Lee, Seung Kyu 대한심미치과학회 2017 Journal of the Korean Academy of Esthetic Dentistr Vol.26 No.1
치과 임상에서 보철 과정은 1) 치아 삭제 2) 임시 수복물 제작 3) 포스트와 코어 4) 인상채득 5) 최종 보철물 합착의 순서로 진행된다. 보철 과정의 마지막이 정확한 적합과 교합 관계를 갖는 최종 보철물을 환자의 지대치의 적합시키는 과정이다. 그런데, 이 최종 보철물은 진료실에서 만들어지는 것이 아니라, 치과 기공실에서 만들어져서 약간의 시간차를 두고 진료실로 오게 된다. 진료실에서 환자의 구강 내 정보를 기공실로 전달하는 유일한 매체는 인상체이다. 그런데 이 과정에서 수 많은 오차가 발생된다. 치과 의사와 치과 기공사는 이 오차를 줄이기 위해 원인을 파악하고 정확한 보철물 제작을 위해 노력해야 한다. Prosthetics procedures in dental clinics 1) Tooth preparation 2) Temporary restoration 3) Post and core 4) Impression 5) Cementation of final prosthesis The final step in the prosthodontic procedure is the fitting of the final prosthesis to the patient's abutment with an exact fit and occlusal relationship. By the way, this final prosthesis is not made in the clinic but is made in the dental lab and comes to the clinic with some time difference. In the clinic, the only medium to deliver the patient's oral information to the dental laboratory is the impression. However, many errors occur in this process. Dentists and dental technicians should try to identify the cause and make an accurate prosthesis to reduce this error.
이승규,Lee, Seung-Kyu 대한심미치과학회 2015 Journal of the Korean Academy of Esthetic Dentistr Vol.24 No.2
성공적싱 완전도재관 치료를 위한 요구조건은 통상적 치료와 크게 다르지 않다. 적절한 치아삭제, 임시치아, 및 정확한 최종인상이 중요하다. 그럼에도 불구하고 차별점은 본딩에 있다. 수복물 내면과 지대치 외면에 레진시멘트를 도포하는 것 이외에도 본딩 술식은 비생활치의 포스트 코어 치료에도 적용할 수 있다. 생활치 지대치는 비생활치보다 심미와 기능 면에서 성공을 거두기가 더 쉽다. 포스트 코어 본딩 술식은 비생활치 지대치의 장기 성공에 중요한 역할을 한다. 본 논문에서 완전 도재관의 성공 전략 중에서 포스트 코어 축성 및 완전 도재관 본딩에 관하여 임상적 경험을 나누고자 한다. The requirements for the successful treatment of all-ceramic restorations are not so different from the ones of conventional restorations. "The provisional restoration followed by an adequate tooth reduction" and "the accurately fitting prostheses with corresponding to final impression" can be the examples of them. Nevertheless, the one which all-ceramic restorations are distinguished from conventional restorations is the additional procedure of so called "bonding". In addition to the application of resin cement between "inner surface of restoration and outer surface of abutment", bonding technology can be also applied to the treatment process of "Post and Core" in particular if the abutments are non-vital teeth. Core build-up for all-ceramic crown is conducted with fiber post and tooth colored composite by considering the properties of the restorations transmitting light. We know well that a vital abutment is easier than a non-vital one to get the targeted goals for clinical success in connection with esthetics and structure. The creation of "Post and Core" with bonding technique is a decisive factor for a long-term success if the abutment is non-vital tooth with dentinal collapse. I would like to share my clinical experience about "post & core build-up and all-ceramic restoration bonding" out of several success strategies of all-ceramic crown with this review article.