http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
온도와 Ti-getter에 따른 Ti0.96Co0.02Fe0.02O2의 자기적 특성
이상율,김응찬,김동현,김동호,김성진,조영걸 한국물리학회 2006 새물리 Vol.53 No.6
The Ti$_{0.96}$Co$_{0.02}$Fe$_{0.02}$O$_2$ samples were synthesized by using a solid-state reaction, and their the X-ray diffraction pattern for showed a pure rutile phase with a tetragonal structures. Mixtures of the proper proportions of the elements sealed in evacuated quartz ampoule were heated at 870 $\sim$ 930 $^\circ$C for one day and then slowly cooled down to room temperature at a rate of 10 $^\circ$C/h. In order to obtain a single-phase material, we had to grind the sample after the first firing and to press the powders into pellets before annealing them for a second time in an evacuated and sealed quartz ampoule. The magnetic properties were investigated using a vibrating sample magnetometer (VSM). The room-temperature magnetic hysteresis (M-H) curve showed an obvious ferromagnetic behavior, and the magnetic moment per Fe atom under an applied of 0.8T was estimated to be about 1.3 $\mu$B/CoFe, but the magnetic moment per Fe atom under an applied of 0.8 T was estimated to be about 0.02 $\mu$B/CoFe without a Ti-getter. Host 물질로 TiO$_2$를 사용하고 여기에 두 가지 전이금속인 Fe와 Co를 첨가하여 직접합성법 (solid state reaction)으로 Ti$_{0.96}$Co$_{0.02}$Fe$_{0.02}$O$_2$시료를 제작하였다. Ti$_{0.96}$Co$_{0.02}$Fe$_{0.02}$O$_2$의 결정학적 구조를 알기 위해 XRD측정을 해 본 결과 tetragonal 구조의 순수 rutile 상을 보였다. 또한 온도에 무관하게 Ti-getter를 넣은 시료는 Fe 2차상이 동일하게 나왔으며, Ti-getter를 넣지 않은 시료는 Fe$_2$TiO$_5$가 검출 되었다. 그리고 VSM (Vibrating Sample Magnetometer)을 이용하여 자기적 특성을 측정하였다. 상온에서 자기이력곡선 (M-H)는 강자성을 보이며, 0.8 T 에서 Fe 원자당 자기 모멘트는 약 1.3 $\mu$B/CoFe가 측정 되었다. 그러나 Ti-getter를 넣지 않고 실험한 시료에서는 약 0.02 $\mu$B/CoFe가 측정 되었다.
산화막과 질화막 위에 제작된 3D SONOS 다층 구조 플래시 메모리소자의 1/f 잡음 특성 분석
이상율,오재섭,양승동,정광석,윤호진,김유미,이희덕,이가원,Lee, Sang-Youl,Oh, Jae-Sub,Yang, Seung-Dong,Jeong, Kwang-Seok,Yun, Ho-Jin,Kim, Yu-Mi,Lee, Hi-Deok,Lee, Ga-Won 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.2
In this paper, we compared and analyzed 3D silicon-oxide-nitride-oxide-silicon (SONOS) multi layer flash memory devices fabricated on nitride or oxide layer, respectively. The device fabricated on nitride layer has inferior electrical properties than that fabricated on oxide layer. However, the device on nitride layer has faster program / erase speed (P/E speed) than that on the oxide layer, although having inferior electrical performance. Afterwards, to find out the reason why the device on nitride has faster P/E speed, 1/f noise analysis of both devices is investigated. From gate bias dependance, both devices follow the mobility fluctuation model which results from the lattice scattering and defects in the channel layer. In addition, the device on nitride with better memory characteristics has higher normalized drain current noise power spectral density ($S_{ID}/I^2_D$>), which means that it has more traps and defects in the channel layer. The apparent hooge's noise parameter (${\alpha}_{app}$) to represent the grain boundary trap density and the height of grain boundary potential barrier is considered. The device on nitride has higher ${\alpha}_{app}$ values, which can be explained due to more grain boundary traps. Therefore, the reason why the devices on nitride and oxide have a different P/E speed can be explained due to the trapping/de-trapping of free carriers into more grain boundary trap sites in channel layer.
Total Skin Electron Beam을 이용한 급성 골수성 백혈병 환자 치료에 대한 연구
이상율,강민규,김성규,Lee, Sang-Ryul,Kang, Min-Kyu,Kim, Sung-Kyu 한국의학물리학회 2009 의학물리 Vol.20 No.3
선형 가속기의 Total Skin Electron Beam Therapy (TSEBT)는 유용하게 사용 되어왔으며, 2에서 9 MeV 에너지 영역의 전자는 mycosis fungoides와 cutaneous lymphomas와 같은 신체의 큰 부분을 덮는 표면상의 병변 치료에 사용 되어져 왔다. 본 연구에서는 Stanford technique로 환자를 치료 하였으며, Stanford technique는 선형 가속기로 전자 빔을 수평 방향으로 조사하여 서 있는 환자의 주위에 $60^{\circ}$로 위치한 6개의 조사면(anterior, posterior, 그리고 4개의 obliques)으로 치료하는 TSEBT의 표준이 되는 방법이다. 각 조사면은 수평으로 하고 적절한 각도에 점을 맞춘 두 개 성분의 빔으로 이루어져있다. 치료시간을 짧게 하기 위해 환자는 하루에 세 개의 이중 조사면으로 치료한다. 첫째 날에는 anterior로 하나의 이중 조사면, posterior에서 두 개의 이중 조사면 그리고 그 다음날에 posterior에서 하나의 이중 조사면 그리고 anterior 경사에서 두 개의 이중 조사면으로 치료한다. 따라서 6개의 이중 조사면의 완전한 주기는 2일로 완성된다. 환자를 치료하기 전 먼저 선량 측정을 하기 위해 원통형 아크릴 팬텀을 제작하여 그 사이 선량계 필름을 삽입하고 환자가 치료 받는 6개 조사면 방향으로 조사를 한 후 선량 분포를 알아보았다. 그런 후 Rando 팬텀을 사용하여 열형광선량계(thermoluminescent dosimetry : TLD)를 앞 가슴, 좌우 옆구리, 등에 부착한 후 6개 조사면 방향으로 방사선을 조사한 후 선량을 측정 하였다. Total Skin Electron Beam Therapy (TSEBT) of linear accelerator has become use so as to be useful, 2~9 MeV of energy territories came to be used with mycosis fungoides and cutaneous lymphomas in the superficial lesion treatment which covers the major portion of the body. I treat a patient to Stanford technique in this study, and it is $60^{\circ}$ around the patients whom Stanford technique irradiated electronic beam to a linear accelerator in horizontal directions and there is a way a standard of TSEBT treat it to six located field (anterior, posterior, and four obliques) becoming. An each field does horizontally it and consist to beam of the two component which fitted the center to a suitable angle. a patient treats it to three dual field a day in order to make short treatment time. when a first day, we treat one dual field at anterior position and two dual field at posterior position. when the second day, treat one dual field at posterior position and two dual field at anterior position. Therefore, six dual field is finished in perfect periodic two days. we made cylindrical acrylic phantom, and I inserted a dosimeter film between phantom. in order to measure a dose distribution calculation before treat a patient, and a patient checked it in six field directions that got from a treatment. It is after that thermoluminescent dosimetry (TLD) as it uses Rando phantom and then measurement dose distribution in six field directions after attaching at chest, the right and left flank, a back after irradiation.