http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이병택,송호연,Do Van Quang 한국세라믹학회 2007 한국세라믹학회지 Vol.44 No.6
Porous Al2O3-(m-ZrO2) composites were fabricated by pressureless sintering, using different volume percentages (40%-60%) of poly methyl methacrylate (PMMA) powders as a pore-forming agent. The pore-forming agent was successfully removed, and the pore size and shape were well-controlled during the burn-out and sintering processes. The average pore size in the porous Al2O3- (m-ZrO2) bodies was about 200 μm in diameter. The values of relative density, bending strength, hardness, and elastic modulus decreased as the PMMA content increased; i.e., in the porous body (sintered at 1500oC) using 55 vol % PMMA, their values were about 50.8%, 29.8 MPa, 266.4 Hv, and 6.4 GPa, respectively. To make the Al2O3-(m-ZrO2)/polymer hybrid composites, a bioactive polymer, such as PMMA, was infiltrated into the porous Al2O3-(m-ZrO2) composites. After infiltration, most of the pores in the porous Al2O3-(m-ZrO2) composites, which were made using 60 vol % PMMA additions, were infiltrated with PMMA, and their values of relative density, bending strength, hardness, and elastic modulus remarkably increased.
$\textrm{Si}_{3}\textrm{N}_{4}$-AIN 복합세라믹스의 In-Situ합성
이병택,김해두,허석환,이찬규,Lee, Byeong-Taek,Kim, Hae-Du,Heo, Seok-Hwan,Lee, Chan-Gyu 한국재료학회 1998 한국재료학회지 Vol.8 No.1
In-Sit반응소결에의해 Si과 AI금속분말을 이용하여 Si$_{3}$N$_{4}$-AIN 복합세라믹스를 합성하였다. 합성된 Si$_{3}$N$_{4}$-AIN복합세라믹스의 미세조직과 결정구조를 해석하기 위해, OM, TEM, XRD및 EDX를 이용하였으며, Si$_{3}$N$_{4}$-AIN -20wt.%AIN복합세라믹스에서 Si의 질화율은 97%로 가장 높았다. Si$_{3}$N$_{4}$-AIN 복합세라믹스에서 Si의 질화율은 AI첨가량 증가에 따라 감소하였다. 대부분의 AI입자들은 다결정 AI입자들은 다결정 AIN(4-H구조)로 완전질화되었으며, 따라서 잔류 AI상은 반응소결체내에서 관찰되지 않았다. Si$_{3}$N$_{4}$의 결정구조는 $\alpha$와 $\beta$구조가 혼재된 상태이며, 잔류 Si입자내에서는 미소균열 및 전위가 관찰되었다. AI/Si$_{3}$N$_{4}$와 Si$_{3}$N$_{4}$ 두계면에서 이들은 거친 형상을 보이지만, 계면반응상은 관찰되지 않았다.
Adaptive Pre-/Post-Filters for NRT-Based Stereoscopic Video Coding
이병택,이봉호,최해철,김진수,윤국진,정원식,김재곤 한국전자통신연구원 2012 ETRI Journal Vol.34 No.5
Non-real-time delivery of stereoscopic video has been considered as a service scenario for 3DTV to overcome the limited bandwidth in the terrestrial digital television system. A hybrid codec combining MPEG-2 and H.264/AVC has been suggested for the compression of stereoscopic video for 3DTV. In this paper, we propose a stereoscopic video coding scheme using adaptive pre-/post-filters (APPF) to improve the quality of 3D video while retaining compatibility with legacy video coding standards. The APPF are applied adaptively to blocks of various sizes determined by the macroblock coding mode and reference frame index. Experiment results show that the proposed method achieves up to 24.86% bit rate savings relative to a hybrid codec of MPEG-2 and H.264/AVC including the inter-view prediction.
외상 후 스트레스 장애의 신경기반 : 부적점화과제와 기능자기공명영상 연구
이병택,유정,이동훈,손명호,강내희,함병주,최남희,Lee, Byeong-Taek,Ryu, Jeong,Lee, Dong Hoon,Sohn, Myeong-Ho,Kang, Nae Hee,Ham, Byung-Joo,Choi, Nam Hee 대한생물정신의학회 2008 생물정신의학 Vol.15 No.2
Objectives : Posttraumatic stress disorder(PTSD) has been primarily associated with emotional problems. Recently, however, the impact of PTSD on cognitive processes has interested a growing number of researchers. The current study is aimed at investigating the cognitive aspects of PTSD at both behavioral and neurological levels. Methods : We recruited individuals with PTSD who survived the Daegu subway explosion in 2003 as well as non-PTSD individuals as a control group. To evaluate the inhibitory processes and the neural mechanisms, we had these individuals perform the negative priming task simultaneously with functional MRI scanning. Results : Behaviorally, the negative priming effect was intact in the control group but was not evident in the PTSD group. In the imaging results, only the PTSD group showed the negative priming effect (i.e., increased activation of the negative priming condition as opposed to the neutral condition) in the dorsolateral prefrontal cortex, anterior cingulate cortex, and inferior temporal gyrus. The PTSD group also showed increased activity for the positive priming condition as opposed to the neutral condition in the claustrum. These results confirm and extend the previous findings that the integrity of the ACC is compromised in the trauma survivors due to disrupted white matter tract. Conclusions : The current results suggest that deteriorated performance of the PTSD group may be due to the functional problem as well as the structural abnormalities.
이병택,유지훈,서범석,김준모 대한이비인후과학회 2007 대한이비인후과학회지 두경부외과학 Vol.50 No.9
Swets syndrome is acute febrile neutrophilic dermatosis. It frequently involves upper and lower limbs, head and neck. The dermatologic symptom of Sweets syndrome is elevated plaque, pain, and skin erythema. We have experienced a case of Swets s that do not improve symptoms with treatment compatible for perichondiritis, Swets syndrome could be the etiology. (Korean J Otorhinolaryngol-Head Neck Surg 2007 ;50 :818-21)
선택적 LPE방법에 의한 GaAs가판 상의 InP이종접합 박막의 성장
이병택,안주헌,김동근,안병찬,남산,조경익,박인식,장성주,Lee, Byung-Teak,An, Ju-Heon,Kim, Dong-Keun,Ahn, Byung-Chan,Nahm, Sahn,Cho, Kyoung-Ik,Park, In-Shik,Jang, Seong-Joo 한국재료학회 1994 한국재료학회지 Vol.4 No.6
Heteroepitaxial InP/GaAs layers were grown using the selective liquid phase epitaxy (SLPE) technique. It was observed that the optimum LPE conditions were $660^{\circ}C$ growth temperature, $5^{\circ}C$ supercooling, and $0.4^{\circ}C$/min cooling rate. Maximum expitaxial layer overgrowth (ELO) of 110-160$\mu \textrm{m}$ was obtained when the seed was aligned along (112) orientation. Initial melt-back of the substrate was observed but limited to the seed region so that flat In-Ga-As-P layers were grpwn throughout the GaAs substrates. The InP/GaAs heteroepitaxial structure could be obtained by growing an additional InP layer on top of the In-Ga-As-P layer. 선택적 LPE방법을 이용하여 (111)B GaAs 기판 상에 InP연속 박막을 성장하고 그 특성을 평가하였다. 적정 LPE성장조건으로 성장온도 $660^{\circ}C$, 과냉도 $5^{\circ}C$, 냉각속도 $0.4^{\circ}C$/min였으며, 연구된 온도 범위에서 성장온도가 증가할수록 표면형상이 개선되었고 ELO의 넓이가 증가하였다. Seed방향이 <112>방향에서 110-160$\mu \textrm{m}$ 정도의 최대 ELO 넓이가 얻어졌으며 60-80$\mu \textrm{m}$정도의 마스크 간격에서 연속박막을 용이하게 성장할 수 있었다. LPE 성장초기에 기판 용해 현상이 발생하였으며 이에 따라 성장박막의 조성이 대략 $In_{0.85}Ga_{0.15}$As$_{0.01}P{0.99}$으로 변화하고 InP/GaAs계면 및 박막 표면형상이 거칠어졌으나 기판의 성장 부위가 제한됨에 따라 통상적인 LPE박막에 비교하여 매우 개선된 표면형상을 얻을 수 있었다. 두개의 성장융액을 이용하여 1차 박막성장 후 다시 InP 박막을 성장하는 2단성장 방법을 사용하여 순수한 InP/GaAs박막을 성장할 수 있었으며 단면 TEM분석 결과 SLPE성장박막으로 전파하는 활주전위는 산화막 마스크에 의해 효과적으로 차단됨을 알 수 있었다.