http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스마트 인버터의 자율적인 Volt-VAR 곡선 변경을 통한 연계점 전압의 안정화
이교범,차지윤,김현진,맹창엽 대한전기학회 2022 전기학회논문지 Vol.71 No.4
This paper proposes a method of stabilizing a point of common coupling (PCC) voltage using an autonomous Volt-VAR curve change in smart inverters. When the interconnection capacity of distributed energy resources rapidly increases, the problem of a reverse power flow occurs and the PCC voltage becomes unstable. The smart inverter which is a grid-connected inverter for distributed energy resources performs Volt-VAR control in oder to stabilize the unstable PCC voltage. The smart inverter autonomously changes the Volt-VAR curve according to the PCC voltage. The smart inverter uses Volt-VAR curve with a larger slope if the PCC voltage is not stabilized when the Volt-VAR curve with a small slop is used. The Volt-VAR curve is maintained if the PCC voltage is stabilized using the Volt-VAR curve. The validity of the proposed method is verified by the simulation results and experimental results
직렬 통신 기능을 이용한 대용량 계통연계형 인버터의 순환전류 저감방법
이교범,전세봉,조성준 대한전기학회 2021 전기학회논문지 Vol.70 No.6
This paper proposes a circulating current suppression method of grid-connected inverters in parallel inverters using serial communication. The grid-connected inverter for large scale photovoltaic generation system consists of multiple modules in parallel based in unit inverter module. The existing method to synchronize PWM signals between inverter modules was implemented by CAN communication with high interrupt priority. However, the high priority of CAN communication can cause deterioration in current control performance due to limited resource of controller. This paper introduces an improved synchronization method of PWM signals with low interrupt priority using time stamp function. The effectiveness of the proposed method is verified by experimental results with 250kW inverter system
3레벨 인버터로 구동되는 유도전동기 직접토크제어의 토크리플 저감법
이교범,송중호,최익,유지윤,Lee, Kyo-Beum,Song, Joong-Ho,Choy, Ick,Yoo, Ji-Yoon 전력전자학회 2000 전력전자학회 논문지 Vol.5 No.6
본 논문에서는 인버터의 스위칭 주파수가 0.5-1kHz로 제한되는 3레벨 인버터로 구동되는 고전압 대용량 유도 전동기 직접토크제어의 토크리플 저감법을 제안한다. 기존의 토크리플 저감법은 인버터 스위칭 주파수가 비교적 높은 2-3kHz에서 동작하는 알고리즘으로 1kHz이하의 낮은 인버터 스위칭 주파수의 시스템에 적용하면 만족할만한 토크 라플 저감 성능블 얻을 수 없다. 새로운 직접토크제어 기법은 특히 낮은 스위칭 주파수를 갖는 시스템에 적용하기 위한 것이며, 모든 동작 속도 구간에서 토크리플 저감 성능을 나티낸다. 시뮬레이션과 실험을 통해 세안한 알고리즘의 타당성을 입증한다. A torque ripple reduction technique of direct torque control(DTC) for high power induction motors driven by 3-level inverters with the inverter switching frequency limited around 0.5-1.0kHz level is presented. It is noted that conventional DTC algorithms to reduce torque ripple are devised for applications with relatively high switching frequency above 2-3kHz. Such conventional algorithms can not accomplish satisfactory torque ripple reduction for 3-level inverter systems with lower switching frequency. A new DTC algorithm, especially for low switching frequency inverter system, illustrates relatively reduced torque ripple characteristics all over the operating speed region. Simulation and experimental results show the effectiveness of the proposed control algorithm.
방사형 기저 함수망 외란관측기를 이용한 서보시스템의 저속응답 성능개선
이교범,유지윤 전력전자학회 2004 전력전자학회 논문지 Vol.9 No.5
A new scheme to estimate the moment of inertia in the servo motor drive system in very low speed is proposed in this paper. The typical speed estimation scheme in most servo system for low speed operation is sensitive to the variation of machine parameters, especially the moment of inertia. To estimate the motor inertia value, the observer using the Radial Basis Function Networks(RBFN) is applied. The effectiveness of the proposed inertia estimation method is verified by experiments. It is concluded that the speed control performance in the low speed region is improved with the proposed disturbance observer using RBFN. 본 논문에서는 극저속 영역에서 서보 전동기 구동 장치의 관성을 추정하는 기법을 제안한다. 대개의 서보 시스템에서 저속 영역의 성능 향상을 위해 사용되는 순시 속도 관측기는 관성계수와 같은 기계계 파라미터의 변동에 민감하다. 이와 같은 문제를 해결하기 위해 방사형 기저 함수망(Radial Basis Function Networks)을 이용하는 전동기 관성을 추정기법을 제안한다. 실험을 통하여 제안한 추정기법의 타당성을 검증한다.