http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
DCM 배치 형상에 따른 연약지반 거동 특성에 관한 연구
유승경,이종영,홍기권,You, Seung-Kyong,Lee, Jong-Young,Hong, Gigwon 한국지반신소재학회 2021 한국지반신소재학회 논문집 Vol.20 No.4
This study described the relationship of settlement-lateral displacement and settlement-heaving according to the DCM type using the model test results, in order to evaluate the behavioral characteristics of the soft ground improved with DCM. As a result, it was found that the total settlement of the model ground was relatively small in the soft ground, to which the DCM was applied, and the settlement was less in the order of the grid type, wall type, and pile type under the same load conditions. This trend was also the same for the lateral displacement and heaving. In addition, the relationship between settlement and lateral displacement of soft ground was analyzed to be similar to that of previous study (Leroueil et al., 1990). Therefore, the DCM of grid type was evaluated to be superior to other types for lateral flow and heaving in the improvement effect of soft ground. 본 연구에서는 DCM으로 보강된 연약지반의 거동특성을 평가하기 위하여, 모형실험결과를 이용하여 DCM 배치 형상에 따른 침하-측방변위, 침하-융기 관계를 분석하였다. 그 결과, 모형지반의 지표면 누적 침하 거동은 DCM이 적용된 지반에서 상대적으로 침하가 적게 발생하였고, 격자식, 벽식, 말뚝식의 순으로 동일한 하중조건에서 침하량이 적게 발생한 것을 알 수 있었다. 이와 같은 경향은 측방변위량과 융기량에 대해서도 동일하게 나타난 것을 확인하였다. 연약지반의 침하와 측방유동의 관계를 분석한 결과, 기존 연구(Leroueil et al., 1990)와 유사한 거동을 보이는 것으로 확인되었다. DCM 배치 형상에 따른 지반개량효과를 평가한 결과, 측방유동과 지반 융기에 대하여 격자식 보강이 벽식 및 말뚝식 보강에 비해 탁월한 지반개량효과를 보유한 것으로 평가되었다.
상대밀도와 세립분 함유율이 현장타설말뚝의 인발저항 성능에 미치는 영향에 관한 연구
유승경,홍기권,정민우,신희수,이광우,유정호,You, Seung-Kyong,Hong, Gigwon,Jeong, Minwoo,Shin, Heesoo,Lee, Kwang-Wu,Ryu, Jeongho 한국지반공학회 2018 한국지반공학회논문집 Vol.34 No.4
본 연구에서는 상대밀도와 세립분 함유율이 현장타설말뚝의 인발저항 성능에 미치는 영향을 평가하기 위하여, 다양한 상대밀도 및 세립분 함유율 조건에 대한 직접전단시험 및 모형말뚝 인발실험을 수행하였다. 직접전단시험으로부터 세립분 함유율에 따른 내부마찰각과 점착력의 변화특성을 정량적으로 파악할 수 있었으며, 인발실험 결과에서는 말뚝의 인발저항 성능에 미치는 상대밀도와 세립분 함유율의 영향을 확인할 수 있었다. 또한, 두 실험 결과를 비교 분석한 결과, 말뚝의 인발저항 성능에 대한 지반의 내부마찰각과 점착력의 기여도는 세립분 함유율 약 13%를 전후로 하여 서로 다르게 나타남을 알 수 있었다. 따라서 현장타설말뚝 설계 시 수행되는 마찰저항 성능 평가는 지반의 세립분 함유율에 따른 강도정수($c-{\phi}$)를 고려해야 할 것으로 평가되었다. This paper described a results of direct shear test and pullout test by using soil supported by drilled shafts in order to evaluate the effect of relative density and fines content on pullout resistance performance of drilled shafts. The result of direct shear test showed that the variation characteristics of internal friction angle and cohesion could be confirmed quantitatively. The result of pullout test also showed that the effect of relative density and fines content on pullout resistance performance of drilled shafts was confirmed. That is, the contribution of the internal friction angle and cohesion of soils on the pullout resistance performance of drilled shafts was found to vary, when the fines content was about 13% based on results direct shear test and pullout test. Therefore, at design of drilled shafts, the effect of skin friction resistance should be considered on the influence factor of strength parameters ($c-{\phi}$) according to the fines content of soil.
표층처리공법으로 개량된 초연약지반의 침하거동에 미치는 영향인자 분석
유승경,이종선,함태규,양기석,조삼덕,최항석,You, Seung-Kyong,Lee, Jong-Sun,Ham, Tae-Gew,Yang, Kee-Suk,Cho, Sam-Deok,Choi, Hang-Seok 한국지반공학회 2008 한국지반공학회논문집 Vol.24 No.12
It is necessary to develop a rational design method for surface reinforcement of very soft ground because most current design works rely on merely crude empirical correlations. In this paper, the mechanical behavior of very soft ground that is surficially reinforced was investigated with the aid of a series of numerical analyses. Several material properties of each dredged soft ground, reinforcement and backfill sand mat have been exercised in the numerical analysis. The result of numerical analysis was compared with those of the laboratory model test. Through the matching process between the numerical and experimental result, it is possible to determine representative material properties of the dredged soft ground, reinforcements and backfill sand mat. These verified material properties permit to evaluate the effect of the stiffness of reinforcement and the thickness of sand mat on the overall deformation of the reinforced soft ground.
유승경(Seung-Kyong You),홍기권(Gigwon Hong) 한국지반신소재학회 2020 한국지반신소재학회 논문집 Vol.19 No.4
본 연구에서는 DCM으로 개량된 연약점토지반에 관한 실내모형실험 결과를 바탕으로, DCM 개량 형식에 따른 연약점토지반의 융기량을 분석하였다. 즉, 무보강 및 3종류의 DCM 개량 형식에 대한 하중 재하에 따른 연약지반의 융기 특성을 평가하였다. DCM이 적용되지 않은 경우에는 4단계 하중조건에서부터 연약점토지반의 측방변형이 크게 증가하면서 미성토구간의 융기가 급격하게 발생하였다. 그리고 최종 하중단계에서의 융기량은 지표면의 인장파괴가 발생되었다. DCM 개량 형식에 따른 지반의 최대 융기량은 최종 하중단계에서 발생하였으며, 융기량의 크기는 말뚝식, 벽식 및 격자식 순으로 감소하였다. 특히, 격자식 개량체가 적용된 경우에는 최종 하중단계에서 재하부 지반의 극단적 파괴에도 불구하고, 지반 융기에 대한 억지효과가 매우 크게 나타났다. 또한 계측위치별 최대 융기량을 분석한 결과, LVDT-1의 위치에서 격자식은 말뚝식과 벽식에 비하여 각각 3.1% 및 1.6% 수준의 융기량을 보였고, LVDT-2의 위치에서는 각각 1.0% 및 2.1%의 융기가 발생하였다. This paper described the analysis result on heaving of soft ground with DCM column type, based on the results of laboratory model tests on the soft ground with DCM column. The heave characteristics of the soft ground were evaluated according to the application of DCM column in soft ground. The results showed that the heaving of soft ground without DCM column occurred rapidly when the lateral deformation of soft ground increased significantly under the 4th load step condition. In addition, the heaving of soft ground in final load step caused tensile failure of the ground surface. The maximum heaving of the soft ground with the DCM column occurred in the final load step, and the heaving quantity decreased in the order of pile, wall, and grid type. Especially, the soft ground with DCM of grid type effectively resisted ground heaving, even if it was extremely failure in the bottom ground of embankment. The results of the maximum heaving according to the measurement point showed that the heaving of the soft ground with DCM of grid type was 3.1% and 1.6% compared to that of the pile and wall type at the location of LVDT-1, and the heaving of the LVDT-2 position was 1.0% and 2.1%, respectively.