http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Eu와 V 동시 도핑에 의한 BiFeO3 박막의 구조와 전기적 특성
장성근,김윤장 한국전기전자재료학회 2019 전기전자재료학회논문지 Vol.32 No.3
Pure BiFeO3 (BFO) and (Eu, V) co-doped Bi0.9Eu0.1Fe0.975V0.025O3+δ (BEFVO) thin films were deposited on Pt(111)/Ti/SiO2/Si(100) substrates by chemical solution deposition. The effects of co-doping were observed by X-ray diffraction, Raman spectroscopy, and scanning electron microscopy (SEM). The electrical properties of the BEFVO thin film were improved as compared to those of the pure BFO thin film. The remnant polarization (2Pr) of the BEFVO thinfilm was approximately 26 μC/cm2 at a maximum electric field of 1,190 kV/cm with a frequency of 1 kHz. The leakage current density of the co-doped BEFVO thin film (4.81×10–5 A/cm2 at 100 kV/cm) was two orders of magnitude lower than of that of the pure BFO thin film. Pt (111) / Ti / SiO2 / Si (100) 기판 상에 순수 BiFeO3 (BFO) 및 유로퓸을 동시 도핑한 Bi0.9Eu 0.1Fe0.975V0.025O3 + δ(BEFVO) 박막을 화학 물질 용액 증착법으로 형성하였다. X 선 회절, 라만 분광법 및 주사 전자 현미경을 사용하여 동시 도핑의 영향을 관찰하였다. 순수한 BFO 박막과 비교하여 BEFVO 박막의 전기적 특성이 향상됨을 확인했습니다. BEFVO 박막의 잔류 분극 (2Pr)은 1 kHz의 주파수에서 1190 kV/cm의 최대 전기장에서 약 26 μC/cm2을 보였고. 동시 도핑 된 BEFVO의 누설 전류 밀도는 100 kV/cm에서 순수한 BFO 박막의 누설 전류 밀도보다 100배 낮은 4.8 x 10-5 A/cm2 을 보였다.
Poly(ρ-phenylenesulfide)와 Poly(ρ-phenylene)으로부터 제조된 탄소의 리튬 이온 2차전지 anode 재료로서의 전기화학적 특성
유덕영,이주성,박수길,변지형,류신환,정윤이 한양대학교 에너지·환경기술연구소 1998 에너지·環境技術論文集 Vol.4 No.-
Poly(p-phenylenesulfide)와 poly(p-phenylene)으로부터 제조된 탄소를 리튬이온 2차전지용 음극재료로 사용하여 전기화학적특성을 연구하였다. 이들 고분자들을 질소 분위기하에서 승온속도 2℃/min로 1000℃까지 상승시킨 후, 1시간 동안 탄화시켜 탄소를 제조하였다. Poly(p-phenylene)으로부터 제조된 탄소가 보다 더 규칙적인 구조를 가지기 때문에 Poly(p-phenylenesulfide)으로부터 제조된 탄소보다 더 많은 용량과 충방전 효율을 나타내었다. 수산화리튬과 염화주석(Ⅱ)을 첨가하여 용량의 증가와 충방전 효율의 증가를 가져올 수 있었다. 이중에서 poly(p-phenylene)에 염화주석(Ⅱ)을 첨가시켜 제조된 탄소가 가장 큰 충방전 용량과 충방전 효율의 향상을 가져왔다. Carbon inaterials manufactured from poly(p-phenylene sulfide) and poly(p-phenylene), were studied on electrochemical characteristics as anode materials for lithium ion secondary battery. These polymer precursors were heat treated for 1hr at 1000℃ with the rate 2℃/min under nitrogen atmosphere. Carbon manufactured from poly(p-phenylene) showed higher capacity and coulomb efficiency of charge/discharge than carbon from poly(p-phenylene sulfide) because the former has better ordered structure. Carbon manufactured from polymer precursors adding stannous chloride or lithium hydroxide showed higher capacity and better efficiency of charge/discharge. Also, carbon manufactured by adding stannous chloride to poly(p-phenylene) showed the highest capacity and efficiency of charge/discharge.