http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
OFDM의 심벌 타이밍 옵셋 추정을 위한 1심벌 옵셋의 훈련심벌 사용법과 CP 출력조절법
옥윤철(Youn Chul Ock),하영호(Yeong Ho Ha) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.12
이 논문에서는 OFDM 시스템의 시간 영역 동기를 위한 2가지 방법을 제안한다. 이것은 심벌타이밍 판정의 모호함의 원인이되는 플레토와 사이드로브를 제거하기 위하여 부 심벌간에 1심벌 옵셋을 두고 타이밍 메트릭을 구하는 방법과 플레토 현상을 경감시킬 수 있는 전력감소지수(Reduction Factor, ρ), 제동상수(Break Constant, βk) 그리고 심벌이식깊이(Implant Depth, δI)등의 파라메터를 사용하여 CP(Cyclic Prefix) 구간의 전력을 수정하는 방법이다. 제안된 2가지 방법은 기존에 제안된 심벌타이밍 동기화기법들과 컴퓨터모의시험을 통해서 성능평가가 이루어졌으며, 제안된 방법들은 다중경로의 레일레이 페이딩채널에서 기존의 시스템에 비해서 더 우수한 통계적 특성을 나타내었다. This paper contains two algorithms proposed for synchronization in OFDM system. The first is having 1 symbol offset while calculating the timing metric, and the second is introduced in new parameter such as Reduction Factor(ρ), Break Constant(βk) and Implant Depth(δI) in order to control the power of CP(Cyclic Prefix) area. Two proposed method are evaluated performance with conventional methode, and than the result of simulation show proposed methods is better than conventional methode while it experience into multipath fading channel.
PN 시퀀스의 위상추적을 통한 Orthogonal Frequency Division Multiplexing 신호의 정수배 주파수 옵셋 추정
옥윤철(Youn Chul Ock) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.6
OFDM(Orthogonal Frequency Division Multiplexing) 수신기의 동기화는 시간영역의 심벌타이밍옵셋 추정과 주파수영역의 반송주파수옵셋 추정으로 이루어진다. 이 논문은 소수배 반송주파수옵셋 추정이 이루어진 이후 잔여의 정수배 주파수옵셋 추정에 대한 새로운 방법을 제안한다. 정수배의 반송주파수 옵셋은 복조기의 BER 성능을 열화시키므로 반드시 교정되어야 한다. 여기에서 제안하는 방법은 길이가 N인 PN 시퀀스의 칩들을 OFDM 부반송파에 변조시켜서 송신하고, 수신기는 수신된 신호를 FFT 수행후 국부에서 발생된 알려진 PN 시퀀스와 비교하여 PN 시퀀스의 위상을 추적함으로 정수배의 반송주파수 옵셋을 찾는 것이다. 이것은 기존의 제안된 차동변조된 신호의 에너지를 측정하는 방법에 비해서 계산속도가 빠르며, 간단한 훈련심벌(training symbol)로 동기를 찾을 수 있는 장점이 있다. The synchronization of OFDM receiver is consisted of symbol timing offset(STO) estimation in time domain and carrier frequency offset(CFO) estimation in frequency domain. This paper proposes new algorithm for correcting the integer CFO after we have done correcting the STO and partial CFO. ICFO must be corrected, since the ICFO lead to degrade bit error rate(BER) of demodulation performance. The PN sequence has information which is subcarrier order since the modified PN sequence, length is same subcarrier, is used in this paper and is modulated each subcarrier by each chip. Thus the receiver track phase of PN sequence after FFTin order to find the subcarrier frequency offset. The proposed algorithm is faster and more simple than convenient methode as measuring carrier energy
CFD를 이용한 광산 선광장의 싸이클론 집진기 성능에 관한 연구
이호형 ( Ho Hyung Lee ),이승철 ( Seung Chul Lee ),노광철 ( Kwang Chul Noh ),옥윤용 ( Yun Yong Ok ),이승호 ( Seung Ho Llee ) 대한설비관리학회 2014 대한설비관리학회지 Vol.19 No.4
The mining operation by installing the cyclone collector to collect various types of suspension dust. Can improve the performance of the local exhaust system shall meet both of these economic and collection efficiency cyclone. Therefore, this study perform the collection efficiency and the conveyance power through a CFD analysis to the cyclone dust collector that is used in the industry in general. The results show that 100% collection efficiency for the generation of suspension dust in all except the V.I.(Φ 500). Pressure drops of standard, high efficiency, V.I.(Φ 300), V.I.(Φ 500) presented each 1,000, 600, 300, 150 Pa. Therefore V.I.(Φ 300) is the most efficient among the dust collectors.