http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Poly(3,4-diethyleneglycolthiophene)의 합성 및 특성
2,2'-thiodiglycolic acid를 출발물질로 하여 dihydroxythiophene 유도체가 합성되었고, 3, 4번 위치에 2-bromoethyl ether의 diethylene glycol 작용기를 치환시켜 티오펜 유도체인 3,4-diethyleneglycolthiophene [DEGT]이 합성 되었다. 합성된 DEGT의 분자량(186)을 GC-MS 스펙트라를 이용하여 확인하였고, ^(1)H-NMR, ^(13)C-NMR을 이용하여 그 구조를 확인하였다. DEGT 단량체의 중합시 도판트로 dodecylbenzenesulfonic acid [DBSA], 산화제로 FeCl(3)를 사용하여 수용액 상에서 각각의 몰비를 변화시켜 PDEGT/DBSA를 합성하였다. PDEGT/DBSA의 수득률, FT-IR 스펙트라, UV-Vis. 스펙트라, 전기전도도 및 용해도를 측정하여 합성조건의 최적화를 조사하였다. 주사슬에 기인한 1535 cm^(-1)의 C=C 신축진동 밴드, 치환된 링의 C-H작용기에서 나타난 비동일평면상 진동밴드가 3105 cm^(-1)와 2968 cm^(-1)에서 확인되었으며, 1261 cm^(-1)의 C-H 동일평면상, 1044 cm^(-1)의 C-H 비동일평면상 진동밴드의 피크를 통하여 중합이 이루어 졌음을 확인하였다. 도핑된 DBSA에 기인된 1509 cm^(-1)와 829 cm^(-1)에서의 S=0 및 S-O 진동밴드의 피크로 부터 중합이 이루어졌음을 확인하였다. 단량체와 도판트의 비율이 증가할수록 수득률 및 전기전도도의 증가가 나타났고, 산화제의 증가시 감소하는 경향을 보였다. 중합시 단량체와 도판트, 산화제의 몰비율이 1 : 0.5 : 2.33에서 가장 높은 수득률과 전기전도도 (1.25 × 10^(-2) S/cm)를 나타내었다. PDEGT/DBSA는 상대적으로 높은 극성의 유기용매(NMP)에서 최대 4 wt.%의 용해도를 나타내었다. In this study, dihydroxythiophene derivative was synthesized from 2,2'-thiodiglycolic acid as a starting material and 3,4-diethyleneglycol thiophene (DEGT) was synthesized by substitution of diethyleneglycole group of 2-bromoethyl ether to 3,4-positions of thiophene ring. Molecular weight and the structure of DEGT synthesized were confirmed by GC-MS, ^(1)H-NMR and ^(13)C-NMR analysis. PDEGT/DBSA was synthesized by oxidative polymerization of DEGT monomer using variouis ratios of dodecylbenzenesulfonic acid (DBSA) dopant, oxidant FeCl(3) in water. With the results of the yield, FT-IR UV-Vis. spectra, electrical conductivity and solubility of PDEGT/DBSA, optimum synthetic condition was established. As the ratios of monomer and dopant increased, the yield and conductivity of PDEGT/DBSA increased. However, as the molar ratio of oxidant increased, the yield and conductivity decreased. In the ratio of monomer : dopant : oxidant of 1 : 0.5 : 2.33, maximum yield and conductivity (1.25 × 10^(-2) S/cm) was obtained. PDEGT/DBSA showed maximum solubility of 4 wt.% in polar solvent (NMP).
자동 API 생성 및 데이터 처리 성능 향상을 위한 RESTful, Redis 기반의 소형 API 플랫폼 설계
최근 사물인터넷(Internet of Things)을 통해 가전제품에서부터 자동차, 웨어러블 기기, 헬스케어 등에 이르기까지 다양한 분야에서 서비스를 제공하면서 IoT에 연동되는 디바이스 및 센서를 제공하는 IoT 관련 중, 소, 스타트업 기업들이 증가하고 있다. 그러나 이런 기업은 IoT관련 플랫폼을 구축하는 시간과 비용에 투자할 여력이 부족하여 초기 아이디어 실현 가능성에 대한 테스트를 진행에 어려움을 겪고 있다. 또한, 많은 기업과 단체에서 각자의 표준을 확립하여 사물인터넷 플랫폼을 구축하고 있는 현 상황에서, 신속히 플랫폼을 결정하지 못하면 개발에 차질이 생긴다. 이러한 점을 착안하여 본 논문에서는 데이터 생성 시 RESTful Service 기반의 API를 자동으로 생성하여 HTTP의 여러 메소드 중 해당 자원에 대한 CRUD(Create, Read, Update, Delete) 요청을 처리할 수 있는 플랫폼을 제안한다. 또한, JSON 형태의 데이터 처리가 가능하며 데이터의 형식, 크기 등에 대한 제한이 없으며 해당 자원에 대한 데이터의 속성 변경도 자유롭다. 제안하는 플랫폼은 적은 비용으로 플랫폼을 구동하기 위해 C++와 Redis를 사용하여 처리 성능을 향상시켜 IoT에 연동되는 디바이스 및 센서가 처리하는 방대한 데이터를 신속히 처리할 수 있도록 하였다.
오형석 東國大學校 經營大學院 2000 국내석사
After undergoing IMF crisis in late 1997, domestic prominent companies including 5 banks have liquidated providing devastating domestic economic crisis. In one nation, the stability of finance or banking is pivotal to its economy. Since it plays important role, each banks should lean on their customers' satisfaction and put much efforts into their self-rehabilitation program. Also during the first half of 1997, Korean banks have plunged into deficit status except some but foreign banks have made much profits even though economic downturn and the small numbers of branches. In this atmosphere of Korean banks, because of the characteristic reason customers participate only in manufacturing process banking service so banks have to find out exact customers' demands then it is required reflecting the results they have to put them into banking management to gain strong strategic comparativeness. Therefore this study consists of the following objectives. The purpose of this study is analyzing provisions of current banks service sectors to enhance Korean banks service quality and restore national comparativeness which are critical under IMF crisis based on given PZB, evaluation system of service quality, service quality Gab model, invented by them and current bank users' expectations and users' perceptions after using services. The methods of analysis in this study was based on SPSSWIN statistical package which is adapted to questionnaire analysis. In the analysis techniques of variables, to evaluate questionnaire Reliability analysis was used, to figure common characteristics about banking service quality Frequency analysis was adapted, to figure banking service quality factor and relevant amount numbers to customers satisfaction Correlation analysis was adapted, to figure the influent relations of banking service quality factors to customers satisfaction Regression analysis was adapted, lastly, to prove this study's hypothesis T-test was adapted which is a test to analyze a gap between bank customers perception after using banks and bank user's expectations before using banks. The results of this studying is as follows. The result of the reliability of each questionnaires which was tested to prove the creditability of whole questionnaire showed Cronbach's α was at high 0.9047. On the other hand, Correlation Analysis used purpose of figuring banking service quality factor and relevant amount numbers to user's satisfaction showed all 5 dimensions of service quality had have Correlation that is all plus direction and set a p<0.01 statistical figure. To figure influent relationship between customers common satisfaction and 5 service quality factors Regression Analysis was adapted adjusting 5 service quality factors as independent variables and the customers satisfaction degree as dependent variables. Specially multi-Regression Analysis was adapted in this study since the independent variables were no less than numbers of 2. The result of analysis showed figure R^(2) as 27% in explanatory rates and only confidence factor among the 5 service qualities statistically showed intentions to the user's satisfaction. Finally, to prove this study's hypothesis T-test was adapted which is a test to analyze a gap between bank customers perception after using banks and bank customers expectations before using banks. All were selected as the results of analysis about this study's hypothesis showed. This determines that bank customers perception after using banks and bank customers expectations before using banks are widened. To restore banks reliabilitics and competitiveness banks should put much efforts into service quality factor as this study's hypothesis suggested before and improvement and development in service factors to satisfy customers are pivotal.
스마트워크 기반 조선소 생산 공정관리 지원 시스템 개발에 관한 연구
오형석 한국해양대학교 대학원 2014 국내석사
Since the recent global economic crisis, shipbuilding and ocean engineering industry has been making effort to have the higher competitiveness via an introduction of a smarktwork technology. In this study, the mobile office concept as the smartwork system was applied to the production process management of shipyard using mobile devices such as smart phones and tablet PCs. In order to successfully apply the mobile office to shipyards, the appropriate smartwork system for the production process management of shipyard was analysed. The mobile office system was designed using CBD(Component Based Development) methodology based on this analysis and developed with consideration of the expansion of the system and the ease of maintenance. The developed system is able to improve the efficiency of the production process management by processing the production data in real time and grasping the accurate process status.
ABSTRACT Numerical Simulation of Dispersion Coefficient at Cross Section of a River Oh, Hyeong seok Master of Science in Civil Engineering Hanyang University, 2011 Advisor : Professor Cho, Yong-Sik The diffusions of flexure in meandering channels are investigated in this study. To analyze the diffusion due to sectional shapes, proper diffusion coefficients are required at meandering channels. To analyze the diffusion coefficient in meandering streams, dispersion coefficients have been calculated by using laboratory measurements as used in Guvmer (1998). While dispersion coefficients were calculated by using an empirical formula. Relative sizes of dispersion and diffusion coefficients were analyzed and diffusion features in two different channels were also examined by using RMA-4. It is assumed that boundary conditions were same except for bottom section and diffusion coefficient of meandering channels to compare and stimulate the differences of diffusion features of meandering channels depending on bottom section. Dispersion coefficients calculated in this study are 0.986 for a trapezoidal channel and 0.0147 for a natural channel. Using calculated dispersion coefficients and RMA-4 model, it is verified that ratio of horizontal direction diffusion coefficient about longitudinal direction diffusion coefficient is proper when it is about 1/40 in Trapezoidal channel and 1/35 in Natural channel. It is also verified that diffusion depending on bottom section is faster in Natural channel than Trapezoidal channel. Maximum concentration of pollutant was little bit higher in the Natural channel, but when it is compared in same times, concentration of pollutant in natural channel is getting lower.
제일원리 계산에 의한 수소저장 매체 FeTi 표면의 기체 (H, O) 흡착 특성과 흡착이 자성에 미치는 영향에 관한 연구
오형석 울산대학교 일반대학원 2006 국내석사
최근 들어 수소는 차세대 에너지원으로 각광을 받고 있다. 수소를 효율적으로 사용하기 위해서는 우수한 수소 저장 매체의 개발이 필요하다. FeTi는 상온과 상압에서 다른 수소 저장 물질에 비해 비교적 흡착과 탈착이 쉽고 수소 저장률이 높아 수소 저장 매체로서 매력적인 물질이다. 또한 FeTi는 수소 저장 매체로서 중요할 뿐 아니라 자성 측면에서도 흥미롭다. 본 연구에서는 자성 연구에 가장 적합하다고 알려진 FLAPW (full-potential linearized augmented plane wave)방법을 사용하여 FeTi 표면에서 기체(H, O)에 따른 자성변화와 흡착에너지에 대하여 연구하였다. 본 계산에서 교환-상관 포텐셜로는 일반화 물매 근사(general gradient approximation; GGA)를 사용하였다. FeTi의 결정구조는 B2 구조이고 그것의 실험적인 격자 상수는 a0 = 2.976 Å 이다. 실제 계산에 사용한 격자 상수는 x = y = , z = a0 로 택하였다. 덩치 FeTi는 상자성이 안정한 것으로 계산되어 실험적인 결과와 일치하였으나, 표면에서는 강자성이 더 안정한 것으로 계산되었다. Fe로 표면이 끝날 경우에 표면 Fe의 자기모멘트는 2.466 μB 이었고, Ti로 표면이 끝날 경우에 표면 Ti의 자기모멘트는 0.403 μB 이었으며 표면 바로 아랫층의 Fe의 자기모멘트도 0.219 μB 로 아주 작아짐을 알 수 있었다. 또한 Fe로 표면이 끝나는 경우, 자성이 깊이까지 영향을 미친다는 사실은 주목할 만하다. Fe의 표면층이 깨끗할 때와, 기체 H와 O가 흡착되었을 때 표면층의 자기모멘트는 각각 2.466 μB, 2.325 μB, 2.358 μB 이었고 표면 바로 아래층의 자기모멘트는 각각 -0.513 μB, -0.325 μB, -0.309 μB 이었다. Ti의 표면층이 깨끗할 때와, 기체 H와 O가 흡착되었을 때 표면층의 자기모멘트는 각각 0.403 μB, -0.099 μB, -0.233 μB 이었고 표면 바로 아래층의 자기모멘트는 각각 0.219 μB, 0.961 μB, 0.918 μB 이었다. FeTi 표면층에 기체 H와 O가 흡착되었을 때 표면층의 자기모멘트는 감소하고 표면의 아래층은 자기모멘트가 증가하였다. 기체의 흡착률을 알아보기 위해 흡착에너지를 계산하였고, Fe 표면층과 Ti 표면층에 기체 H가 흡착되었을 때의 흡착에너지는 각각 3.991 eV, 4.006 eV 이었고, Fe표면층과 Ti 표면층에 기체 O가 흡착되었을 때의 흡착에너지는 각각 6.146 eV, 8.041 eV 이었다. Fe표면층과 Ti 표면층에 기체 Hx2가 흡착되었을 때의 흡착에너지는 각각 6.570 eV, 7.191 eV 이었다. 계산된 흡착에너지 결과에서 Ti가 표면층인 경우가 Fe가 표면층인 경우보다 수소를 잘 흡착할 것으로 보인다. Recently, hydrogen is spotlighted for a next source of energy. We need an excellent material to store hydrogen. An intermetallic alloy FeTi is known as one of promising reversible materials to store and release hydrogen at the atmospheric pressure and room temperature. We calculate gas (H, O) adsorption trend and its effect on magnetism of hydrogen storage material FeTi, using the full potential linearized augmented plane wave (FLAPW) method based on density functional theory. General gradient approximation (GGA) is used for exchange-correlation potential. FeTi is a cubic B2 crystal structure. Here we chose the cubic lattice with a0 = 2.976 Å, and the calculation unit cell is taken x = y = and z = a0 to take account of half-monolayer gas adsorption. The magnetic moments of the surfaces (subsurfaces) were calculated to be 2.466 μB(-0.513 μB) and 0.403 μB (0.219 μB) for the Fe-terminated and the Ti-terminated surfaces, respectively. The larger calculated magnetic moment comes out for the Fe-terminated surface than the Ti-terminated one. The magnetic moments of surface Fe (subsurface Ti) are obtained to be 2.325 μB(-0.325 μB), 2.357 μB(-0.309 μB) for H- and O-adsorbed surfaces, respectively. The magnetic moments of surface (subsurface) Ti are significantly reduced to -0.099 μB(0.961 μB), -0.233 μB(0.918 μB) for H- and O- adsorbed surfaces, respectively. Whereas magnetic moments of the surfaces are reduced, those of the subsurfaces are enhanced with H- and O-adsorption. Adsorption energies were calculated in order to get some information on the gas adsorption behavior. The adsorption energies of H at Fe- and Ti-terminated surfaces were calculated to be 3.991 eV and 4.006 eV, respectively. The adsorption energies of O at the surfaces were calculated to be almost two times higher (6.416 eV and 8.041 eV for Fe- and Ti-terminated surfaces, respectively) compared to those of H. The adsorption energy of surface Fe and Ti with Hx2 have been to calculated to be 6.570 eV and 7.191 eV, respectively. The energy gains from both of H and O adsorption are larger for Ti-terminated surface than Fe-terminated one.
눈썹부 접근법으로 수술한 다발성 뇌동맥류 환자들의 임상적 분석 : Eyebrow Surgery for Multiple intracranial Aneurysms
오형석 Graduate school of Kosin University 2004 국내박사
연구배경 및 목적 : 신경외과 분야에서 다발성 뇌동맥류 치료는 논란의 대상이다. 전방 순환계 뇌동맥류 수술시 대부분의 신경외과 의사들은 전통적으로 절개가 큰 개두술을 해왔으며, 많은 합병증을 유발하였다. 특히 다발성 뇌동맥류일 경우 더욱 고식적인 수술법을 선택하려는 경향이 있다. 저자는 상와 안연 개두술을 포함한 최소침습 눈썹부 절개술로 다발성 뇌동맥류를 수술적으로 치료해 왔으며, 전통적인 테리온 접근법에 비해 여러 가지 장점이 있었다. 본 연구는 눈썹부 접근법으로 수술한 다발성 뇌 동맥류 환자들을 임상적으로 분석하고 눈썹부 접근법의 역할을 평가 하고자 한다. 연구대상 및 방법 : 저자는 1999년 10월부터 2004년 8월까지 최소침습 눈썹부 접근법으로 수술을 받은 88명의 뇌동맥류 환자 중 다발성 뇌동맥류로 진단된 20명을 대상으로 후향적 분석을 하였다. 나이, 성별, Hunt와 Hess(HH) 등급, Fisher(F) 등급, 동맥류의 위치 및 개수, 수술 횟수, 단계적 수술여부, Glasgow outcome (GOS) scale, 임상적 결과 및 합병증 등의 항목에 따라 분석하였다. 결과 : 관찰 대상 환자 20명 중 여자는 18명, 남자는 2명이었다. 총 44개 동맥류(파열된 것 20개 및 파열되지 아니한 것 24개) 중 후교통 동맥류가 12예로 가장 많았고, 파열된 것은 전교통 동맥류에서 8예로 가장 많았다. 16명에서 2개의 동맥류를, 4명에게 3개의 동맥류를 가지고 있었다. 총 26회의 눈썹부 접근법을 시행하였으며, 20명에서 일측으로 접근하여 36개 동맥류를 결찰하였고, 이후 6명에서는 반대쪽으로 접근하여 동맥류를 결찰하였다. 44개 중 2개는 수술을 받지 않았다. 최초 혈관촬영 검사에서 나타나지 않았던 동맥류의 파열로 재출혈이 있었던 경우는 2명이었다. 치료 결과 GOS 5점이 12명, 4점이 3명, 3점이 2명, 1점이 3명이었고, 사당원인으로 심근경색증, 연축, de novo 동맥류의 파열이 각각 1명이었다. 평균 수술 시간은 4.2시간이었고, 3명에서 수혈을 하였다. 결론 : 다발성 뇌 동맥류에 대한 수술방법으로 눈썹부 접근법은 전통적 개두술로 인한 합병증을 줄일 수 있고, 수줄 시간이 짧게 걸리고, 수혈이 필요하지 않는 장점이 있는 동시에 전통적 개두술과 비교하여 수술의 결과가 비슷하므로 향후 선택적 수술방법으로 이용될 수 있으리라 믿는다. Objectives : The treatment strategy for multiple intracranial aneurysms has remained one of the most challenging questions in neurosurgery. Most multiple aneurysms have been treated with a large craniotomy or additional craniotomy, which often provides craniotomy-related complications. The eyebrow approach including a superior orbital rim craniotomy offers several advantages over the classic fronto-temporal craniotomies to treat intracanial aneurysms. This study is aimed to evaluate the role and clinical outcome of eybrow surgeries in the patients with multiple intracranial aneurysms. Methods : A retrospective review of the medical records of 20 patients with multiple aneurysms in 88 patients who have got minimally invasive eyebrow operation for intracranial aneurysms between December 1998 and July 2003 was undertaken. The authors analyzed multiple factors including sex, age, Hunt-Hess grade, Fisher grade, numbers of aneurysms and operations, clinical outcome and complications. Results : Twenty patients harbored 44 aneurysms (20 ruptured and 24 unruptured), anterior communicating artery was the most common rupture site, totaling eight cases. Sixteen patients had two aneurysms, and four patients had 3 aneurysms. In total 26 eyebrow surgery, unilateral approach was 20 case habored 36 aneurysms and second contralateral approach were 6 case habored 6 aneurysms. Two aneurysms was not treated. Premature rupture during operation happened in two patients. The outcome of patients was GOS Ⅴ in 12, GOS Ⅳ in 3, GOS Ⅲ in 2, GOS Ⅰ in 3. The mean operation time was 4.2 hours and three patient needed transfusion. Conclusion : It is likely that minimally invasive eyebrow approach would be an alternative technic in treatment of multiple intracranial aneurysms.