http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
3차원 사용자 인터페이스 장비와 PC 클러스터 환경 타일 가시화 시스템의 효율적인 연동
오민환(Min-Hwan Oh),김광식(Kwang Sik Kim),최윤혁(Yun Hyuk Choi),양진오(Jin Oh Yang),조진연(Jin Yeon Cho) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.2
본 논문에서는 3차원 사용자 인터페이스를 PC 클러스터에 기반한 타일 가시화 시스템에 효율적으로 연동시킬 수 있는 방법을 제안하였다. 사용자 편의성을 증대하기 위해 개발된 3차원 사용자 인터페이스 소프트웨어에는 모델 자세조종 명령어를 비롯한 각종 메뉴가 포함되어있으며, 3차원 사용자 인터페이스 장비에서 발생되는 신호 잡음을 없애기 위해 박스형 필터를 사용하였다. 또한 타일 가시화 시스템과 3차원 사용자 인터페이스 사이에서 신 호 대기로 인해 발생하는 모델 운동 지연 문제를 해결하기 위해 비동기식 통신형태에 기반한 새로운 ‘통신 분리’ 알고리듬을 제안하였으며, 검증 테스트를 통해 제안된 방안의 효율성을 확인하였다. In this paper, an efficient technique is proposed to integrate the 3D user interface with the tiled display system in PC cluster environment. In the developed 3D user interface software, various menus are provided to increase the user friendliness of the interface, including the several model-control-commands. To eliminate the noise produced from the 3D user interface devices, the box filtering algorithm is employed. Further, a communication splitting algorithm, which is a kind of asynchronous communication method, is proposed to reduce the motion delay between the 3D interface and the tiled display system, and its efficiency is validated through the benchmarking tests.
이동최소자승 중첩 격자 기법과 유전자 알고리듬을 이용한 2차원 구조물의 경감공 위치 최적 설계
오민환(Min Hwan Oh),우동주(Dong Ju WOO),조진연(Jin Yeon Cho) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.10
항공우주 구조물의 설계 시, 과도한 응력집중을 방지하기 위해 경감공의 위치를 변경해야 하는 경우가 종종 발생한다. 이러한 위치 최적 설계를 위해서는 경감공의 위치갱신에 따라 변경된 구조 형상을 반영할 수 있도록 재 모델링을 수행해야 한다. 널리 사용되는 재 모델링 기법으로는 재 격자 생성기법을 들 수 있다. 그러나 구조물의 형상이 변경될 때마다 격자를 재생성 할 경우 많은 시간이 소요되며, 특히 사면체나 삼각형에 비해 좋은 성능을 가진 육면체나 사각형 격자 사용에 제약이 따르게 된다. 본 논문에서는 이러한 문제점을 보완하기 위해 이동최소자승법 기반의 중첩 격자 기법과 유전자 알리고리듬을 이용한 새로운 위치 최적 설계 알리고리듬을 제안하였으며, 제안된 위치 최적 설계 알고리듬의 성능을 평가하기 위해 2차원 구조물의 경감공 위치 최적 설계를 수행하였다. In aerospace structural design, the position of lightening hole is often required to be optimized from the initial design in order to avoid an excessive stress concentration. To remodel the updated configuration in optimization procedure, re-meshing procedure is conventionally adopted. However, this approach is time-consuming, and has limitations especially in handling hexahedral or quadrilateral meshes, which are preferred because of their good numerical performances. To attenuate these disadvantages, new optimization scheme is proposed by combining the MLS(Moving Least Squares) based overset method and the genetic algorithm in this work. To test the validity of the proposed optimization scheme, optimizations of positions of lightening holes in 2D structures have been carried out.
Sample-reusable 이동최소자승 메타모델 기반의 달착륙선 2단 충격흡수 시스템 최적설계
오민환(Oh Min Hwan),정민호,조진연 한국산업응용수학회 2011 한국산업응용수학회 학술대회 논문집 Vol.6 No.1
본 연구에서는 이전의 발췌점의 재사용이 가능한 이동최소자승 메타모델(moving least squares meta-model)을 이용하여 2단으로 구성된 달착륙선 충격흡수 장치에 대한 최적설계를 수행하였다. 이동최소자승법을 이용한 메타모델은 이동최소자승법이 갖는 장점으로 인하여 새로 얻은 발췌점뿐만 아니라 이전단계에서 사용된 발췌점의 재사용이 가능하며, 이로 인해 보다 강건하고 정확한 메타모델을 구성할 수 있다. 달착륙선의 충격흡수 장치의 복잡한 충격거동을 모사하기 위해 1차원 구성방정식 모델을 사용하였으며, 이와 함께 상용해석 소프트웨어인 ABAQUS를 활용하여 충격흡수 장치 최적화를 위한 메타모텔을 구성하였다. 구성된 메타모델을 순차적 근사 최적화 기법에 적용하여 2단 충격흡수 장치의 최적화를 수행하였으며, 이를 통해 허니콤 구조를 이용한 충격흡수 장치의 셀크기와 포일두께를 변화시킴에 따라 달착륙선의 월면 착륙 시 충격하중을 크게 저감시킬 수 있음을 확인하였다.
오민환(Min-Hwan Oh),박철원(Chul-Won Park) 대한전기학회 2014 전기학회논문지 P Vol.63 No.2
Tidal power is one of new and renewable energy sources. Tidal power is generated by using the gap in the water level between the water outside and inside the embankment. All tidal power plant in Korea were being operated by import of turn-key from abroad. The know-how and technology which are the most important to build predictive control system has become increasingly difficult to obtain from advanced countries because most of them avoid to transfer, which the domestic development of the control system is needed. In this paper, a study on start·stop system at water turbine-generator for tidal power plant at the beginning of development was presented. For improvement the efficiency and develope of core technology of the start·stop system, the technique and characteristics of tidal power, modeling, maximum generation calculation method, and optimal control of joint control system in Sihwa tidal power plant were studied.
오민환(Min-Hwan Oh),김효진(Hyo-Jin Kim),구경완(Kyung-Wan Koo),조정숙(Joung-Sook Cho) 대한전기학회 2015 대한전기학회 학술대회 논문집 Vol.2015 No.11
최근 유럽연합, 미국, 일본 등 선진국은 마이크로그리드 시스템을 상용화하기 위하여 다양한 실증 프로젝트를 진행하고 있다. 국내의 마이크로그리드에 대한 연구동향 및 실증 Project를 조사 및 분석하고, 국내 마이크로그리드 실증기술을 기반으로 수출형 Biz모델방안을 제시하고 개도국 수출형 마이크로그리드 설계방안을 제시하였다.
2차 다항희귀 메타모델을 이용한 달착륙선 충격흡수 시스템의 순차적 근사 최적설계
오민환(Min Hwan Oh),조영민(Young Min Cho),이희준(Hee Jun Lee),조진연(Jin Yeon Cho),황도순(Do Soon Hwang) 한국항공우주학회 2011 韓國航空宇宙學會誌 Vol.39 No.4
본 연구에서는 2단으로 구성된 달착륙선 충격 흡수 장치에 대한 최적화를 수행하였다. 충격 흡수 장치의 복잡한 충격거동을 모사하기 위해 1차원 구성방정식 모델을 제안하였으며, 이와 함께 상용해석 소프트웨어인 ABAQUS를 활용하여 최적화를 위한 2차 다항희귀 메타모델을 구성하였다. 구성된 메타모델을 순차적 근사 최적설계 기법에 적용하여 2단 충격 흡수 장치의 최적화를 수행하였으며, 이를 통해 허니컴 구조를 이용한 충격 흡수 장치의 셀크기와 포일 두께를 변화시킴에 따라 달착륙선의 월면 착륙 시 충격하중을 크게 저감시킬 수 있음을 확인하였다. In this work, optimization of two-stage shock absorption system for lunar lander has been carried out. Because of complexity of impact phenomena of shock absorption system, a 1-D constitutive model is proposed to describe the behavior of shock absorption system. Quadratic polynomial regression meta-model is constructed by using a commercial software ABAQUS with the proposed 1-D constitutive model, and sequential approximate optimization of two-stage shock absorption system has been carried out along with the constructed meta-model. Through the optimization, it is verified that landing impact force on lunar lander can be considerably reduced by changing the cell size and foil thickness of honeycomb structure in two-stage shock absorption system.