http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신형순,Shin, Hyung-Soon 대한전자공학회 1999 電子工學會論文誌, D Vol.d36 No.2
DRAM에서 알파 입자의 입사에 의한 소프트 에러율을 예측하는 시뮬레이터를 개발하였다. 새로운 시뮬레이터는 수집 전하량에 대한 해석적 모델을 사용함으로서 소자 시뮬레이터나 몬테칼로 시뮬레이터를 사용하는 기존의 예측 시뮬레이터에 비하여 계산시간을 크게 감소하였다. DRAM에서 발생하는 소프트 웨어의 모드를 분석한 결과, bit-bar 모드에 의한 소프트 에러율이 가장 큰 것을 알 수 있었으며 256M DRAM의 셀 구조에 대한 소프트 에러율을 시뮬레이션하여 storage 캐패시턴스가 약 5fF의 margin을 갖고있음을 밝혔다. A soft error rate (SER) simulator for DRAM was developed. In comparison to the other SER simulator using device simulator or Monte Carlo simulator, the proposed simulator substantially reduced the CPU time using an analytical model for the alpha-particle-induced charge collection. By analysing the soft error modes in DRAM, the bit-bar mode was identified as the main cause of soft error. Using the new SER simulator, SER of 256M DRAM was investigated and it was found that the storage capacitance had a 5fF margin.
난각칼슘의 제조 조건 및 유기산이 칼슘의 이온화에 미치는 영향
신형순,김공환 ( Hyung Soon Shin,Kong Hwan Kim ) 한국응용생명화학회 1997 Applied Biological Chemistry (Appl Biol Chem) Vol.40 No.6
An efficient process for recovery of calcium from the eggshell was developed and some organic acids were used in an attempt to enhance the degree of calcium ionization. Eggshell membrane was readily separated from crushed eggshell based on the differences in specific gravities. The conditions which allowed most efficient membrane removal were found to be 30 rpm of speed, 30 min of residence time and 0.08 of volume fraction. It took 3 hours for the eggshell powder prepared at 1000℃ to reach L value of 90 with the Hausner ratio being 1.43. The calcium ion concentrations were 990, 3500, 3900 and 4200 ppm in pure water, acetic acid, citric acid and lactic acid(0.05∼3%) aqueous solution, respectively. The degrees of ionization of calcium-citrate-malate complex(CCM), calcium-citric acid complex(CC) and calcium malic acid complex(CM) increased by 4 to 5 times compared to eggshell calcium powder.
난각칼슘의 제조 조건 및 유기산이 칼슘의 이온화에 미치는 영향
신형순,김공환,Shin, Hyung-Soon,Kim, Kong-Hwan 한국응용생명화학회 1997 Applied Biological Chemistry (Appl Biol Chem) Vol.44 No.4
폐기물로 버려지고 있는 난각에 다량으로 포함되어 있는 칼슘을 효율적으로 회수하고, 이온화 정도를 높일 수 있는 방법을 조사하였다. Ball mill을 이용해 난각을 분쇄해 물속에서 비중의 차이를 이용하여 난각분을 얻었고, 회전속도 30 rpm, 체류시간 30분, volume fraction 0.08에서 가장 높은 난막 제거 효과를 보였다. 난각분을 전기로에서 회화시켜 얻은 난각칼슘분의 백색도를 측정해 L값이 90이상에 도달하는 시간은 전기로 온도 850, 900, $1000^{\circ}C$에서 각각 14, 9, 3시간이 소요 되었으며, 난각칼슘분의 Hausner ratio는 1.43으로 조사되었다. 난각칼슘분은 물, 초산, 구연산, 젖산$(0.05{\sim}3%)$ 용액에서 각각 990, 3500, 3900, 4200 ppm의 이온화 정도를 나타내었다. Calcium-citrate-malate complex(CCM), calcium-citric acid complex(CC), calcium-malic acid complex(CM)는 물에서 이온화 정도가 난각칼슘분에 비해 약 4-5배 증가 하였다. An efficient process for recovery of calcium from the eggshell was developed and some organic acids were used in an attempt to enhance the degree of calcium ionization. Eggshell membrane was readily separated from crushed eggshell based on the differences in specific gravities. The conditions which allowed most efficient membrane removal were found to be 30 rpm of speed, 30 min of residence time and 0.08 of volume fraction. It took 3 hours for the eggshell powder prepared at $1000^{\circ}C$ to reach L value of 90 with the Hausner ratio being 1.43. The calcium ion concentrations were 990, 3500, 3900 and 4200 ppm in pure water, acetic acid, citric acid and lactic acid$(0.05{\sim}3%)$ aqueous solution, respectively. The degrees of ionization of calcium-citrate-malate complex(CCM), calcium-citric acid complex(CC) and calcium malic acid complex(CM) increased by 4 to 5 times compared to eggshell calcium powder.
신형순,Shin, Hyung-Soon 대한전자공학회 1999 電子工學會論文誌, D Vol.d36 No.1
알파 입자의 입사에 의하여 생성된 전하중 접합으로 수집되는 전하량을 예측할 수 있는 통합 모델을 개발하였다. 이 모델은 funneling과 diffusion에 의한 전하 수집 현상을 모두 고려함으로써 접합 면적, 접합 전압 알파 입자의 입사 에너지, 입사 각도, 입사점의 위치, 그리고 접합간 격리에 사용되는 트랜치 산화막 깊이의 변화에 따른 수집전하량의 변화를 정확하게 예측할 수 있다. A Unified model for the alpha-particle-induced charge collection has been developed. By accounting for funneling and diffusion charges separately, new model accurately describes the dependence of collected charge on junction size, junction bias, injection energy, injection angle, injection point, and trench oxide depth.