http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신상영,박일호,이종억,장준호 한국복합신소재구조학회 2019 복합신소재구조학회논문집 Vol.10 No.5
최근 FRP 보강공법의 보강성능 저하 요인으로 발생하는 박리파괴를 방지하고자 다양한 앵커리지 시스템이 개발되고 있다. 본 연구는 기존 사용되고 있는 기계식 정착 앵커와 FRP 앵커를 복합하여 새로운 메커니즘의 Hybrid 앵커모델을 개발하였다. Hybrid 앵커를 개발하기 위해 다양한 종류의 기계식 앵커와 Carbon 및 Aramid 섬유를 조합하였다. 개발된 다양한 앵커모델에 대한 특성을 평가하고자 Pull out 강도 실험을 수행하였다. 예비 실험 결과 Drop-in 앵커와 Undercut 앵커의 경우 낮은 정착력으로 적용에 한계가 있었다. Stud 앵커는 높은 정착력을 확인하였으며, 앵커와 FRP를 결합하기 위해서는 일체화가 중요한 것으로 나타났다. 일체화를 위해 앵커 내부에 홀을 천공하여 FRP rod를 결합하는 형태로 I-Hybrid 앵커를 제작하였다. I-Hybrid 앵커 의 경우 앵커 내부 홀에서 뽑히는 거동을 보였다. 따라서 향후 연구에서 I-Hybrid 앵커가 일체화된다면 FRP 박리파괴 저감에 효과적일 것으로 사료된다. Recently, the FRP reinforcement technique has been used for repair and reinforcement of aged structures. Various anchorages systems are being developed to prevent debonding fracture caused by reduction of reinforcement performance of the FRP reinforcement method. This study was conducted to develop anchor model that improved anchorage system’s anchorage strength and workability. The hybrid anchor model of the new mechanism was developed by combining the existing mechanical anchor and FRP anchor. To develop hybrid anchors, various types of mechanical anchors were combined with carbon and aramid fibers. Pull out strength test was performed to evaluate the characteristics of various anchor models. As a result of the pilot experiment, the drop-in anchor and the undercut anchor were limited to the low anchorage strength. Stud anchors showed high anchorage strength, and integration was important for combining anchor and FRP. I-Hybrid anchors were fabricated in the form of coupling the FRP rod by drilling holes inside the anchor for integration. In the case of the I-Hybrid anchor, the pull-out behavior was shown in the anchor hole. Therefore, if I-Hybrid anchors are integrated in future studies, it is believed that they will be effective in reducing FRP debonding failure.
광탄성 측정 기법을 이용한 입상체 초기 조건의 얕은 기초 지지력에 대한 영향 평가
신상영,정영훈 대한토목학회 2016 대한토목학회논문집 Vol.36 No.3
Traditional limit equilibrium method needs an assumption of the failure surface to calculate the bearing capapcity of the shallow foundation. From the viewpoint of the mechanics of granular materials, however, the failure of the soil mass is initated by the local buckling of the contact force chains. In this study we observed the directional distribution of the contact force chains in the granular assembly stacked by model particles subjected to the model shallow foundation during loading. Two sets of the assemblies with a regular structure and initially local imperfection were prepared for tests. Existence of the initial local imperfection has a significant effect on the directional distribution of the contact force chains. The bearing capacity of the assembly with local imperfection is only 67% the capacity of the assembly with the regular structure. 고전적인 한계 평형 해석에서 얕은 기초의 지지력은 토체 내부의 파괴면을 가정하여 시작한다. 하지만 입상체 역학의 관점에서 토체의 파괴는 접촉력 사슬 구조의 국부적인 좌굴에 의해 시작된다. 본 연구에서는 모형 토립자를 이용하여 구성한 입상체 상부에 얕은 기초 하중을 재하하여 파괴 시까지 입상체 내부의 접촉력 사슬 분포가 어떻게 변화하는지 관찰하였다. 초기 결함이 없이 규칙적인 구조를 가지는 조건과 입상체 하부에초기 국부적인 불완전성이 있는 조건을 가진 두 가지 종류의 입상체를 준비하여 실험하였다. 입상체 내부에서 발생하는 접촉력 사슬 구조의 방향분포는 초기 불완전성의 여부에 따라 매우 큰 차이를 보였다. 초기 불완전성이 있는 입상체는 결함이 없는 입상체가 견딘 하중의 67%만을 견딜수 있었다.