http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연료극 지지체식 원통형 고체산화물 연료전지의 제조 및 특성
송근숙,송락현,임영언,Song, Keun-Sik,Song, Rak-Hyun,Ihm, Young-Eon 한국재료학회 2002 한국재료학회지 Vol.12 No.9
A low temperature anode-supported tubular solid oxide fuel cell was developed. The anode-supported tube was fabricated using extrusion process. Then the electrolyte layer and the cathode layer were coated onto the anode tube by slurry dipping process, subsequently. The anode tube and electrolyte were co-fired at $140^{\circ}C$, and the cathode was sintered at $1200^{\circ}C$. The thickness and gas permeability of the electrolyte depended on the number of coating and the slurry concentration. Anode-supported tube was satisfied with SOFC requirements, related to electrical conductivity, pore structure, and gas diffusion limitations. At operating temperature of $800^{\circ}C$, open circuit voltage of the cell with gastight and dense electrolyte layer was 1.1 V and the cell showed a good performance of 450 mW/$\textrm{cm}^2$.
테입캐스팅을 이용한 대면적 (100 cm<sup>2</sup>) 연료극 지지체식 평판형 고체산화물 연료전지의 개발
유승호,송근숙,손희정,김종희,송락현,정두환,백동현,신동열,Yu, Seung-Ho,Song, Keun-Suk,Song, Hee-Jung,Kim, Jong-Hee,Song, Rak-Hyun,Jung, Doo-Hwan,Peck, Dong-Hyun,Shin, Dong-Ryul 한국전기화학회 2003 한국전기화학회지 Vol.6 No.1
본 연구에서는 중저온에서 작동되는 연료극 지지체식 평판형 연료전지를 연구하였으며, 저가의 공정인 테입케스팅법을 이용하여 $0.8\~1mn$의 두께와 $25,\; 100,\;150cm^2$크기의 평판형 연료극 지지체를 제작하였고, 연료극 지지체의 특성을 확인하기 위해서 기공률, 가스 투과율 그리고 전기전도도 등을 측정하였다. $12wt.\%$의 결합제를 사용하여 제작된 지지체의 기공률은 $45.8\%$이고 환원 시 $53.9\%$로 증가함을 보였다. 연료극 지지체는 $850^{\circ}C$에서 900S/cm의 높은 전기전도도를 나타내었으며, 1기압 하에서 공기로 측정하였을 때 6l/min의 기체투과량을 보였다. 단전지의 제조는 테잎케스팅 법으로 제조된 연료극 지지체위에 슬러리 디핑 코팅법을 이용하여 전해질과 공기극을 순차적으로 제조하였다. YSZ의 농도를 $10wt.\%\;와\;20wt.\%$로 하여 제조된 전해질의 두께는 각각 form와 300m이었고, 공기극은 LSM-YSZ/LSM/LSCF의 다층 구조로 구성되었다. $10{\mu}m$두께의 전해질은 매우 치밀하였고 3기압 하에서 가스 투과도는 2.5ml/min을 나타내었다. 단전지의 성능 시험에서 $20\~30{\mu}m$두께의 전해질을 갖는 연료극 지지체식 평판형 연료전지는 $750^{\circ}C$에서 0.6V, $300 mA/cm^2$성능을 보였다. For the development of low temperature anode-supported planar solid oxide fuel cell, the planar anode supports with the thickness of 0.8 to 1 mm and the area of 25, 100 and $150\;cm^2$ were fabricated by the tape casting method. The strength, porosity, gas permeability and electrical conductivity of the planar anode support were measured. The porosity of anode supports sintered at $1400^{\circ}C$ and then reduced in$H_2$ atmosphere was increased from $45.8\%\;to\;53.9\%$. The electrical conductivity of the anode support was $900 S/cm\;at\; 850^{\circ}C$ and its gas permeability was 6l/min at 1 atm in air atmosphere. The electrolyte layer and cathode layer were fabricated by slurry dip coating method and then had examined the thickness of $10{\mu}m$ and the gas permeability of 2.5 ml/min at 3 atm in air atmosphere. As preliminary experiment, cathode multi-layered structure consists of LSM-YSZ/LSM/LSCF. At single cell test using the electrolyte layer with thickness of 20 to $30{\mu}m$, we achieved $300\;mA/cm^2$ and 0.6V at $750^{\circ}C$
여기동,송근숙,이미형,Yeu, Ki-Dong,Bernstein, Kun-Sook,Lee, Mi-Hyoung 한국가정간호학회 2012 가정간호학회지 Vol.19 No.1
Purpose: The purpose of this study is to analyze the concept of recovery in relation to those living with mental illness and provide a better understanding to the definition, perspectives, and paradigm of recovery in phenomenon, as a conceptual knowledge. Methods: A literature review was conducted to define the concept of recovery from a mental illness by using key words, "recovery", "mental health and illness", "concept analysis" and "recovery-oriented nursing", and searching the Cumulative Index to Nursing and Allied Health Literature, PubMed, Cochrane library and RISS4U database. Concept analysis of recovery was done, by using the Walker and Avant's framework of concept analysis. Results: Attributes of recovery for those living with mental illness included regain, life reconstruction, hope, adjustment, and health. Antecedents of recovery from mental illness included instilling hope, recovery vision, belief, peer support, recovery-oriented services, empowerment, personal accountability, education, human rights and culture. The consequences, as meanings of recovery included self-esteem, hopeful life, positive adjustment, and healthy life. Conclusion: Concept of recovery is important for a nurse to understand when caring for a person living with mental illness. This concept of recovery from mental illness may apply to future studies to develop a recovery-oriented nursing intervention.
연료극 지지체식 원통형 고체산화물 연료전지의 성능 특성
송락현,송근숙,Song Rak-Hyun,Song Keun-Suk 한국재료학회 2004 한국재료학회지 Vol.14 No.5
To improve the conventional cathode-supported tubular solid oxide fuel cell (SOFC) from the viewpoint of low cell power density, expensive fabrication process and high operation temperature, the anode-supported tubular solid oxide fuel cell was investigated. The anode tube of Ni-8mol% $Y_2$O$_3$-stabilized $ZrO_2$ (8YSZ) was manufactured by extrusion process, and, the electrolyte of 8YSZ and the multi-layered cathode of $LaSrMnO_3$(LSM)ILSM-YSZ composite/$LaSrCoFeO_3$ were coated on the surface of the anode tube by slurry dip coating process, subsequently. Their cell performances were examined under gases of humidified hydrogen with 3% water and air. In the thermal cycle condition of heating and cooling rates with $3.33^{\circ}C$/min, the anode-supported tubular cell showed an excellent resistance as compared with the electrolyte-supported planar cell. The optimum hydrogen flow rate was evaluated and the air preheating increased the cell performance due to the increased gas temperature inside the cell. In long-term stability test, the single cell indicated a stable performance of 300 mA/$\textrm{cm}^2$ at 0.85 V for 255 hr.