http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
백동기,성세진 한국조명전기설비학회 1998 조명·전기설비학회논문지 Vol.12 No.4
돌극형 동기 릴럭턴스 전동기의 고속회전 영역에서, 철손의 영향은 무시할 수 없게 된다. 본 논문에서는 돌 극형 동기 릴럭턴스 전동기에 대하여 고정자 철손이 고정자 내의 둥가 와전류에 의해서 발생한다는 가정 하에서, 둥가 인덕턴스에 직렬로 등가 철손저항이 삽입된 모델을 이용하여 철손을 고려한 전압방정식을 유도하였다. 또, 동작 주파수의 증가에 따른 철손의 변동은 벡터제어계의 제어성능을 악화시키고,d 축과 q 축의 쇄교자속에 서로 간섭하여 벡터제어의 적용을 어렵게 한다. 따라서, d 축과 q 축을 비간섭화 하여 철손저항의 영향을 제거해서 비간섭 토크제어가 가능한 벡터제어법올 제안하였으며, 시뮬레이션올 통하여 이를 확인하였다. In the high speed range for salient type synchronous reluctance motor, the effect of iron loss can not be negligible. In this paper, under he assumption that stator iron loss is generated from the equivalent eddy current in the stator, we derive the voltage equations including iron loss from the model that is added the equivalent iron loss in the equivalent inductance in series. The variation of iron loss is dependent on the increase of the operating frequency change for he worse a performance of the vector control system. As there is cross coupling between the d and q axes, it is hard to apply the vector control to the proposed model. Hence, we propose a decoupling current controller for including the effects of iron loss, And we show that the proposed vector control scheme achieves the desired performances through simulation results.
백동기,성세진 전력전자학회 1997 전력전자학회 논문지 Vol.2 No.1
본 논문에서는 자동차나 항공기에서 많이 사용되고 있는 고속 솔레노이드 밸브의 플런저형 솔레노이드에 대한 설계기술을 확보하기 위하여, 수치해석을 통해 플런저의 이동시간에 대해 설계 파라메타들이 미치는 영향 및 솔레노이드의 동작특성을 검토하였다. 솔레노이드의 형상이 원통형이므로 축대칭원통좌표계를 이용하였고, 특히 전자기적 부분의 이론 해석시 와전류에 의한 영향을 고려하였으며, 가정자로법에 의해 퍼미언스를 계산하여 해석에 활용하였다. 구해진 파라메타의 해석 결과를 참고로 하여, 파라메타 값을 약간씩 변화시켜서 시간에 따른 플런저의 변위, 전류, 흡인력과의 관계등 동특성을 재해석하는 과정을 반복하여 최적치를 도출하였다. 도출된 최적치를 사용한 모의실험결과 플런저 이동시간은 1.8[ms] 정도의 고속이 됨을 알 수 있었다. In this paper, numerical analysis of dynamic characteristics for the plunger-type solenoid was used for a high speed solenoid valve with fast switching is discussed. The theoretic analysis of the electromagnetic field including eddy currents in the solenoid is studied by using permeance. The optimum value of design parameters which are a mass and an area of the plunger, a source voltage, a elastic modulus of the spring, a stroke, a number of turns, are obtained by the results of the investigation on effect of a parameter on others. And dynamic characteristics of acting solenoid that is the variation of magnetic force, displacement, solenoid current are investigated.
뇌졸중 이후 불명열(Fever of Unknown Origin)로 진단 받은 환자를 청리자감탕가미(淸離滋坎湯加味)로 치료한 치험 1예
백동기,조권일,최진영,신학수,최우정,임은경,이윤재,김동웅,신선호,황상일,Baek Dong-Gi,Cho Gwon-Il,Choi Jin-Young,Shin Hak-Soo,Choi Woo-Jung,Rhim Eun-Kyung,Lee Yun-Jae,Kim Dong-Woung,Shin Sun-Ho,Hwang Sang-Il 대한한방내과학회 2003 大韓韓方內科學會誌 Vol.24 No.2
Fever is an elevation of body temperature to a level above normal to greater than $37.2^{\circ}C$. Fever of Unknown Origin is usually defined in adults as continuous fever at least 3 weeks duration with daily temperature elevation above $101.5^{\circ}F(38.3^{\circ}C)$ and remaining undiagnosed after 1 week of intensive study in the hospital. Diagnoses for Fever of Unknown Origin fall into three general categories: infectious disease, connective tissue disease, neoplasm. We experienced a cases of Fever of Unknown Origin which occurred after subarachnoid hemorrhage and intracerebral hemorrhage. As for treatment, we used Cheongleejagamtang-gami(淸離滋坎湯加味). Fever of Unknown Origin was improved within 5 days of the admission.
Ga과 In이 첨가된 비정질반도체 As-Te필름의 광학적 성질
백동기,이종록 梨花女子大學校 韓國生活科學硏究院 1990 韓國生活科學硏究院 論叢 Vol.46 No.-
The film samples are prepared by the thermal evaporation method. The films which are illuminated in room and low temperature and annealed are measured with x-ray diffraction, absorption coefficients and SEM photographs. We can see photodarkenning and thermaldarkening from the experimental results. After laser beam investgated, the samples AsTeIn_x with annealing were shown the reversibility that the abbsorption edge moved to the long wavelength and then moved to the short wavelength again. But the absorption edgge of AsTeGa_x moved to the short wavelength. The absorption cofficients of both samples are increased and the band gap energies are decreased. Amorphous thin films of AsTeGa_x and AsTeGa_x are separated into two different phase from the detection by SEM photographs.
백동기,한유희,김기대,정철,Paek, T.K.,Han, Y.H.,Kim, K.D.,Jung, C. 대한용접접합학회 1991 대한용접·접합학회지 Vol.9 No.2
1. 16bit 개인용 컴퓨터인 IBM-PC/AT수준에서 레이저 가공을 위한 임의의 도형을 입력하여 DXF File로 출력하고, External명령인 AutoCAM을 추가하여 AutoCAM의 실행이 가능하였으며 AutoCAM의 종료후에는 다시 AutoCAD로 작업이 가능하다. 2. 개발한 AutoCAM은 AutoCAD Ver 2.6i로부터 Release 10까지의 DXF File을 읽어 Graphic 출력이 가능하다. 3. 가공 경로를 NC프로그램이 임의로 선정가능하면서, 가장 능률적인 가공작업이 수행될 수 있 도록 연속 또는 최인접 도형요소를 자동 선정하고 이의 조건에 따른 Auto Mode의 NC프로그램 생성이 가능하다. 4. 생성된 NC프로그램을 레이저 가공기에 전송하여 가공실험을 실시한 결과, 생성된 NC 프로 그램은 거의 수정하지 않아도 작동이 가능한 정도의 만족할 만한 결과를 얻었으므로 실용화에 큰 문제가 없는 것으로 사료된다. 이상과 같이 레이저 가공을 위한 CAD/CAM시스템은 초심자등의 이용상의 편리를 위하여 대화식으로 하였으며 사용된 언어도 Quick BASIC으로 자체 개발하 였으므로 앞으로 이 분야의 연구 및 실용화를 위한 기초자료로 활용될 수 있을 것으로 사료된다.