http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 배준우 (검색결과 103 건)
- 무료
- 기관 내 무료
- 유료
-
-
배준우,김희령 대한방사선방어학회 2016 방사선방어학회지 Vol.41 No.2
Background: The scattered photons cause reduction of the contrast of radiographic image and it results in the degradation of the quality of the image. In order to acquire better quality image, an anti-scattering x-ray gird should be equipped in radiography system. Materials and Methods: The X-ray anti-scattering grid of the inclined type based on the hybrid concept for that of parallel and focused type was tested by MCNP code. The MCNPX 2.7.0 was used for the simulation based test. The geometry for the test was based on the IEC 60627 which was an international standard for diagnostic X-ray imaging equipment-Characteristics of general purpose and mammographic anti-scatter grids. Results and Discussion: The performance of grids with four inclined shielding material types was compared with that of the parallel type. The grid with completely tapered type the best performance where there were little performance difference according to the degree of inclination. Conclusion: It was shown that the grid of inclined type had better performance than that of parallel one.
-
Three Dimensional Fretting Wear Analysis by Finite Element Substructure Method
배준우,채영석,이춘열 한국정밀공학회 2009 International Journal of Precision Engineering and Vol. No.
In steam generator of nuclear power plant, flow induced vibration in a U-tube bundle could cause wear and fatigue failure. This vibration causes fretting-wear between the supporting plates and tubes by generating infinitesimal friction. In this study, a substructure method is developed for three dimensional finite element models of fretting wear problems and its feasibility is also verified. The substructure method can reduce large amount of computation time required by conventional finite element analysis.
-
배준우,임재원,김선중,Kouji Mimura,Takamichi Miyazaki,Masahito Uchikoshi,Minoru Isshiki 대한금속·재료학회 2010 METALS AND MATERIALS International Vol.16 No.3
ZrO2 dielectric layers were prepared by a two-step process, a deposition of pure Zr film with and without a negative substrate bias voltage and a subsequent oxidation of the Zr films. We focused on the effect of the negative substrate bias voltage on the Zr film deposition and the subsequent oxidation of the Zr films. As a result, the Zr film deposited at the substrate bias voltage of −50 V (Vs = −50 V) was found to have a high intensity peak of Zr (100) and a uniform and smooth surface. From the capacitance-voltage and currentvoltage measurements of the ZrO2 films, a high dielectric constant of 21 and the equivalent oxide thickness (EOT) of 2.6 nm were obtained on the oxidation layer of the Zr film deposited at Vs = −50 V. On the other hand, a low dielectric constant of 15 and the EOT of 3.6 nm was obtained on that of the Zr film deposited at Vs = 0 V. The leakage current density of the ZrO2 film (Vs = −50 V) was 5.69×10−4A/cm 2, and this value was much lower than the 1.21×10−4A/cm 2for the ZrO2 film (Vs = 0 V). It was found that the two-step process by subsequent oxidation after film deposition using a negative substrate bias voltage is useful for obtaining high-quality dielectric layers.
-
배준우,황재근,박경흠,양희준,이춘열 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.1
Recently, force measurement systems are commonly used in many industrial fields and the precision of the measurement system is getting more important as the industry needs more precise tools and instruments to make high quality products. However, a high precision force measurement system is hard to make unless we know precisely the causes, quality and quantity of measurement errors in advance. In this work, many possible mechanical causes of measurement errors are reviewed including ratio of length to diameter of sensing part, radius of contact area, radius of bearing part, ratio of material properties and change of boundary conditions. Also, the measurement errors are analyzed by nonlinear finite element method and the nonlinear behavior of the errors are investigated. The results can be used to design force measurement systems and expected to be very useful especially for compact type load cells.
-
-
-
오류가 발생한 멀티바이트 인코딩 데이터의 인코딩 기법 판별 알고리즘 개선
배준우,김선범,박희진 한국차세대컴퓨팅학회 2017 한국차세대컴퓨팅학회 논문지 Vol.13 No.2
인코딩(encoding)은 컴퓨터에서 사용되는 음성, 영상 및 텍스트 문자를 부호화하는 방법을 가리킨다. 그러므로 특정 데이터를 열람하기 위해서는 해당 인코딩 정보를 알아야하며, 데이터마다 인코딩을 판별해주는 알고리즘들이 존재한다. 하지만 실제 음원이나 문서를 송수신하는 과정에서 패킷 손실이 발생할 수 있으며, 특히 무선 통신망에서패킷 스니핑으로 정보를 가로챌 경우 손실률은 더욱 증가되어 인코딩 기법 판별에 어려움이 발생한다. 본 논문에서는 이러한 오류가 발생한 데이터의 인코딩 기법 판별율을 향상시키기 위해 기존의 문자 인코딩 기법 판별 프로그램인 'uchardet'에 Bit-shift 알고리즘을 적용하여 성능 향상을 이루었다. 알고리즘의 성능 평가를 위해 임의의 한글및 일본어 텍스트 파일에 손실률(loss rate)을 적용하여 부분적으로 데이터가 소실된 인코딩 파일을 생성하여 결과를 비교하였다. 그 결과, 패킷이 손실된 데이터에서 Bit-shift 알고리즘을 적용한 'uchardet-bitshift' 경우 기존의 알고리즘보다 더 나은 성능을 보였다. 한국어 인코딩의 경우 기존의 uchardet는 0.005% 손실률까지 100%의정확도를 보이고 1%보다 높은 손실률에서는 인코딩을 전혀 판별해 내지 못한데 비해, Bit-shift 알고리즘을 적용할 경우 0.05%의 손실률에도 100%의 정확도를 보였으며 그보다 큰 손실률에서도 해당 인코딩을 판별해냈다. 또한 한자어를 많이 포함하는 일본어의 경우 손실률이 높아질수록 중국어 인코딩으로 잘못 판별하는 경향을 보였다.시뮬레이션 분석 결과, Bit shift 알고리즘을 추가하여 기존 인코딩 기법 판별 알고리즘의 개선이 가능하였다. In computer science, an encoding is a standardization of converting information to one format for audio, video or text. Therefore, the encoding information of the data should be known to open and read it and there are algorithms detecting encoder of the data. However, some informations of data could be disappeared by packet loss when transmitted on network, especially, if the data is snatched by packet sniffing or eavesdropping from wireless communications. In this paper, we improve the performance of encoding detection algorithm of 'uchardet' program for multi-byte encoded data with errors based on bit-shift algorithm. To simulate the performance, we generated Korean and Japanese text data with errors that is removed some random bits at random positions. Then the detection algorithm are tested using the data and 'uchardet-bitshift' showed better performance than 'uchardet'. When Korean texts are used, 'uchardet' could detect perfectly with ≤0.005% errors but it showed 0% detection rate with ≥1% errors while 'uchardet-bitshift' detected perfectly with ≤0.05% errors and it showed correct detection cases with ≥1% errors. Japanese texts with errors tend to report falsely as Chinese encoding because Japanese texts include lots of Chinese characters. As a results, we improved encoding detection algorithms by applying bit shift operation.
-
IEEE 802.15.4g MR-OFDM SUN 표준을 지원하는 0.18-μm CMOS 기저대역 회로 설계에 관한 연구
배준우,김창완,Bae, Jun-Woo,Kim, Chang-Wan 한국정보통신학회 2013 한국정보통신학회논문지 Vol.17 No.3
본 논문에서는 IEEE 802.15.4g MR-OFDM SUN 시스템에 적용 가능한 4개의 멀티채널 대역폭 및 최대 84 dB 전압이득을 제공할 수 있는 기저대역 수신기를 제안한다. 제안하는 기저대역 수신기는 연산증폭기를 이용한 저항 부궤환 구조의 가변 이득 증폭기 2개와 한 개의 Active-RC 5차 Chebyshev필터, 그리고 한 개의 DC-offset 제거회로로 구성된다. 제안하는 기저대역 수신기는 100 kHz, 200 kHz, 400 kHz, 그리고 600 kHz의 1 dB 다중 채널 차단 주파수를 지원하며, +7 dB에서 +84 dB까지 1 dB 단계로 전압 이득을 제공한다. 또한 제안하는 기저대역 수신기는 DC-offset 제거 회로를 사용함으로써 직접 변환 수신기 구조에서 발생되는 DC-offset 문제를 회피하였다. 모의실험 결과 제안하는 수신기는 최대 차동 신호 $1.5V_{pp}$의 입력 신호를 받아들일 수 있으며, 5 kHz와 500 kHz에서 42 dB, 37.6 dB 노이즈 지수를 각각 제공한다. 제안하는 I/Q기저대역 수신기는 $0.18-{\mu}m$ CMOS 공정으로 설계되었으며, 1.8 V의 전압으로 부터 총 17 mW 전력을 소모한다. This paper has proposed a multi-channel and wide gain-range baseband circuit blocks for the IEEE 802.15.4g MR-OFDM SUN systems. The proposed baseband circuit blocks consist of two negative-feedback VGAs, an active-RC 5th-order chebyshev low-pass-filter, and a DC-offset cancellation circuit. The proposed baseband circuit blocks provide 1 dB cut-off frequencies of 100 kHz, 200 kHz, 400 kHz, and 600 kHz respectively, and achieve a wide gain-range of +7 dB~+84 dB with 1 dB step. In addition, a DC-offset cancellation circuit has been adopted to mitigate DC-offset problems in direct-conversion receiver. Simulation results show a maximum input differential voltage of $1.5V_{pp}$ and noise figure of 42 dB and 37.6 dB at 5 kHz and 500 kHz, respectively. The proposed I-and Q-path baseband circuits have been implemented in $0.18-{\mu}m$ CMOS technology and consume 17 mW from a 1.8 V supply voltage.
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
