게실양 식도 천공 1에

박장필,정 준,변홍열,이승은,조주영,전영수,송인석 大韓消化器病學會 1993 大韓消化器病學會誌 Vol.25 No.6

한국산 구멍쟁이버섯과(多孔菌科)에 관한 본초학적(本草學的)연구

박장필 ( Jang Pil Park ),이숭인 ( Soon In Lee ),정종길 ( Jong Gil Jeong ) 대한본초학회 2012 大韓本草學會誌 Vol.27 No.3

Objective: For the purpose of developing Korean herbology of the plants to Polyporaceae in Korea, the literatures of the successive generations have been thoroughly investigated to prepare this article. Methods: The examined herbological books and research paper which published domestically and abroad. Results: 1. Polyporacease plants (raised in Korea) are devided into 31 classes with 59 species. Among them, 26 species in 19 classes were found serviceable, which indicates 44 % of all Polyporacease plants. 2. Among those 59 species, Coriolus·Phellinus·Trametes includes 5 species. Ganoderma, a medicinal plant, includes 3 species. 3. Dividing the serviceable plants of Polyporacease, the fruit body family had the largest number; 25. 4. Out of plants Polyporacease, neutral taste plants was 17 species and sweet taste was 14 species. 5. Only 8 species of Polyporaceae plants were found to enterd into the spleen and heart. 6. 11 species were found to prevent cancer, 7 species were found to dispel wind-dampness and Alleviate edem antittusive and antasth matic. 7. There were no toxic species in the Plyporaceae. Conclusion: There were totaled to 31 genera and 59 species in Polyporaceae in Korea and among them medicinal plants are 19genera, 26 species, some 44% in total.

천마의 근경과 지상부의 성분 및 항산화 활성 연구

박장필 ( Jang Pill Park ),이숭인 ( Soong In Lee ),정종길 ( Jong Kil Jeong ) 대한본초학회 2015 大韓本草學會誌 Vol.30 No.1

Objectives : This study was carried out to know the necessity of freezing and boiling process of Gastrodiae Rhizoma. Also we need to evaluate Gastrodia elata floral axis as a product ingridients. Methods : Frozen Gastrodiae Rhizoma (GF1, GF2) and Gastrodia elata floral axis (GFA) were prepared. They were divided into samples (GF1 : frozen at the freezer, GF2; frozen and boiled for 10 hours, GFA; dried at 7 0℃ for 120 hours) for experiment. They were extracted using water, freeze dried and powdered. And we analyzed proximate compositions, free sugars, gastrodin, p-hydroxybenzyl alcohol and p-hydroxybenzyl aldehyde content, phenolic and flavonoid, electron donating ability and nitrate scavenging activity and antioxidant activity. Results : In moisture, crude ash, fructose, glucose, sucrose, p-Hydroxybenzyl alcohol GF2 showed lower level than GF1. But GF2 showed higher content than GF1, in crude fat (0.8% > 0.19%), gastrodin (8.84±0.58% > 4.18±0.73%), and p-hydroxybenzyl aldehyde (2.45±0.26% > 2.07±0.16%) content, phenolic (9.98±0.07% > 3.35±0.03%) and flavonoid (3.01±0.06% > 1.09±0.04%) content, electro donating ability (15.21±6.51% > 10.44±4.78%), nitrate scavening activity (20.43±5.30% > 13.62±5.78%). GFA has a relatively lower key indicators component, but has a enough impact on antioxidant effect in phenolic (11.85±0.08%) and flavonoid content (1.45±0.03%), electron donating ability (18.58±9.06%) and nitrate scavenging activity (19.41±9.90%). Conclusions : In the view of proximate compositions, free sugars, functional component and antioxidant activity, the results indicated that boiling process is effective for the frozen Gastrodiae Rhizoma. And Gastrodia elata floral axis has a significantly functional components and antioxidant activity.

천마의 증포 횟수에 따른 기능 성분과 항산화활성 및 관능적 특성연구

박장필 ( Jang Pill Park ),추한나 ( Han Na Chu ),김정상 ( Jeong Sang Kim ),김경옥 ( Kyeong Ok Kim ),이숭인 ( Soong In Lee ),정종길 ( Jong Kil Jeong ) 대한본초학회 2014 大韓本草學會誌 Vol.29 No.6

Objectives : The objective of this study is to determine the best numbers of steaming-drying cycles of Gastrodiae Rhizoma for both efficacy and taste. We investigated various characteristics among Gastrodiae Rhizoma samples (GSD1, GSD3, GSD5 and GSD7) through the number of steaming-drying cycles increased. Methods : Gastrodiae Rhizoma were steamed and dried at different repeated numbers. They were divided into samples (GSD1; steamed and dried once, GSD3; steamed and dried three times, GSD5; steamed and dried five times, GSD7; steamed and dried seven times) for experiment. They were extracted using water, freeze dried and powdered to analyze proximate composition, free sugar amount, functional components, antioxidant activity and sensory evaluation. Results : Proximate composition and the amount of free sugars of Gastrodiae Rhizoma did not have meaningful differences among samples. Phenolic and flavonoid content of samples were increased by increasing steaming-drying numbers. Gastrodin content had different values and GSD7 was the highest in comparison with others. Increasing steaming-drying numbers led to a increasing in radical and nitrate scavenging activity in samples. Regarding to sensory evaluation, GSD5 was selected as the best sample according to its highest hedonic score mean (5.54/7) among all samples for appearance, color, taste and overall acceptability. Conclusions : The results indicated that 5th-cycling sample was effective in views of functional components, antioxidant activity and sensory characteristics. Moreover, it was suggested that steaming-drying process improved remarkably the effects of Gastrodiae Rhizoma.

인공심장박동기가 이식된 유방암환자의 방사선 치료에 대한 사례 보고

채승훈,박장필,이양훈,유숙현,성원모,김규보,Chae, Seung-Hoon,Park, Jang-Pil,Lee, Yang-Hoon,Yoo, Suk-Hyun,Seong, Won-Mo,Kim, Kyu-Bo 대한방사선치료학회 2012 대한방사선치료학회지 Vol.24 No.2

목 적: 본원을 내원한 인공심장박동기를 이식한 유방암 환자에 대해 장비위치이전수술, 차폐 또는 빔 정형 등을 고려하여 방사선치료를 시행한 사례의 전반적인 과정을 고찰해보고자 한다. 대상 및 방법: 본원을 내원한 유방암환자 중 좌측 흉부에 인공심장박동기를 이식한 54세 여성 환자를 대상으로 방사선치료를 시행하였다. 환자의 방사선치료 시행이 결정된 후, 인공심장박동기로의 선량 유입을 최소화하기 위해 순환기내과와의 협의를 통해 환자 좌측 흉부에 이식되어있던 기기를 우측 흉부로 이동시키는 수술을 시행하였다. 총 선량 5,040 cGy, 일일선량 180 cGy, 28회, 치료 조건으로 광자선 에너지 10 MV, 조사야 크기 0/$9.5{\times}20$ cm를 사용하여 Half beam 대향이문조사치료를 시행하기 위한 방사선치료계획을 하였다. 방사선 치료계획 시 적합한 차폐체의 두께를 정하기 위하여 Solid water phantom($30{\times}30{\times}7$ cm)에 Farmer-type chamber (TN30013, PTW, Germany)를 이용해 차폐체(납, Pb $28{\times}27{\times}0.1$ cm)를 사용하였을 경우와 사용하지 않았을 경우 기기에 유입될 예상선량을 산출하였다. 전산화치료계획장비(Eclipse, Varian, USA)를 사용해 치료계획을 시행하고, 두께 2 mm의 차폐체를 사용하였을 경우와 사용하지 않았을 경우에 기기에 유입될 예상선량을 산출해내었다. 치료 첫 날, MOSFET Dose Verification System (TN-RD-70-W, Medical Canada Ltd., Canada)을 이용하여 인공심장박동기에 유입되는 선량을 측정하였다. 결 과: 차폐체 두께산정 실험에서 인공심장박동기가 위치한 B 지점에서 차폐체 2 mm일 경우, 105.265 cGy, 처방선량의 2.09%로 산출되어, 적합한 차폐체의 두께를 정할 수 있었다. 전산화치료계획장비에서 2 mm 차폐 시 총 치료기간 동안 11.5에서 38.2 cGy까지 기기에 유입될 수 있음이 나타났으며, DVH 최대값은 77.3 cGy로 나타났다. 환자의 첫 치료 시 MOSFET 측정 결과 4.3 cGy로 측정되어, 총 치료기간동안 120.4 cGy, 처방선량의 2.39%의 선량이 유입될 것으로 예상되었다. 환자는 치료기간동안 그리고 치료받은 후 어떠한 부작용도 일으키지 않았으며, 인공심장박동기는 치료시작 전과 후에 순환기내과에서 기능측정을 받은 결과 아무런 이상을 보이지 않았다. 결 론: 현재 인공심장박동기가 이식된 암 환자의 방사선 치료에 대한 공신력 있는 기관의 권고안이 노후화되어, 새로운 장비들에 대한 데이터가 부족한 상황에서 우리는 타과와 원활한 협업, 철저한 치료계획과 정밀한 QA, 지속적인 in-vivo dosimetry와 monitoring 등을 통하여 이러한 환자들의 방사선치료를 성공적으로 해낼 수 있을 것으로 사료된다. Purpose: In this study, we considerate our radiation therapy process for the breast cancer patient implanted a pacemaker applying the machine movement surgery, shielding, beam selection. Materials and Methods: We perform radiation therapy to a 54 years old, breast cancer patient implanted a pacemaker. The patient underwent a surgery to move the position of a pacemaker to right side breast after consultation with cardiology department. Prescribed dose was 5,040 cGy and daily dose 180 cGy for 28 fractions. The 10 MV photon energy, field size 0/$9.5{\times}20$ cm, half beam and opposing portal irradiation are used. To find out appropriate thickness of shielding board, we carried out an experiment using a solid water phantom ($30{\times}30{\times}7$ cm), a Farmer-type chamber (TN30013, PTW, Germany) and a shielding board (Pb $28{\times}27{\times}0.1$ cm). We calculated expected absorbed dose to te pacemaker with absorb ratio and shielding ratio. In the PTP system (Eclipse, Varian, USA), we figured out how much radiation would be absorbed to the machine with and without shielding. First day of the radiation therapy, we measured head scatter to the pacemaker with MOSFET Dose Verification System (TN-RD-70-W, Medical Canada Ltd., Canada). Results: In the phantom measurement, we found out appropriate thickness was 2 mm of shielding board. In the RTP, when using 2 mm shielding the pacemaker will be absorbed 11.5~38.2 cGy and DVH is 77.3 cGy. In the first day of the therapy, 4.3 cGy was measured so 120.4 cGy was calculated during total therapy. The patient was free from any side effects, and the machine also normally functioned. Conclusion: As the report of association which have public confidence became superannuated, there is lack of data about new machine. We believe that radiation therapy to thiese kind of patients could be done successfully with co-operation, patient-suitable planning, accurate QA, frequent in-vivo dosimetry and monitoring.

전립선암의 세기조절 방사선치료 시 불균질부에 의한 선량변화에 관한 고찰

윤일규,박장필,이제희,박흥득,Yoon, Il-Kyu,Park, Jang-Pil,Lee, Jae-Hee,Park, Heung-Deuk 대한방사선치료학회 2007 대한방사선치료학회지 Vol.19 No.2

Purpose: The pelvic phantom was fabricated in the following purposes: (1) Dose verification of IMRT plan using Eclipse planning computer, (2) to study the interface effect at the interface between rectal wall and air. The TLD can be inserted in the pelvic phantom to confirm the dose distribution as well as uncertainty at the interface. Materials and Methods: A pelvic phantom with the dimension of 30 cm diameter, 20 cm height and 20 cm thickness was fabricated to investigate the dose at the rectal wall. The phantom was filled with water and has many features like bladder, rectum, and prostate and seminal vesicle (SV). The rectum is made of 3 cm-dimater plastic pipe, and it cab be blocked by using a plug, and film can be inserted around the rectal wall. The phantom was scanned with Philips Brillance scanner and various organs such as prostate, SV, and rectal wall, and bladder wall were delineated. The treatment parameters used in this study are the same as those used in the protocols in the SNUH. TLD chips are inserted to the phantom to evaluate the dose distribution to the rectal wall (to simulate high dose gradient region), bladder wall and SV (to simulate the high dose region) and 2 spots in anterior surface (to simulate the low dose region). The TLD readings are compared with those of the planning computer (ECLIPSE, Varian, USA). Results: The target TLD doses represented as the prostate and SV show excellent agreements with the doses from the RTP within +/-3%. The rectal wall doses measured at the rectal wall are different from the those of the RTP by -11%. This is in literatures called as an interface effect. The underdosages at the rectal wall is independent of 3 heterogeneity correction algorithm in the Eclipse RTP. Also the low dose regions s represented as surface in this study were within +/-1%. Conclusion: The RTP estimate the dosage very accurately withihn +/-3% in the high dose (SV, or prostate) and low dose region (surface). However, the dosage at the rectal wall differed by as much as 11% (In literatures, the underdosage of 9$\sim$15% were reported). This range of errors occurs at the interface, for example, at the interface between lung and chest wall, or vocal cord. This interface effect is very important in clinical situations, for example, to estimate the NTCP (normal tissue complication probability) and to estimate the limitations of the current RTP system. Monte-carlo-based RTP will handle this issue correctly.

서울대학교병원의 방사선치료 환자통계에 관한 고찰

윤일규,박장필,최병돈,박진흥,박흥득 대한방사선치료학회 2002 大韓放射線治療技術學會誌 Vol.14 No.1

Metal artifact reduction algorithm의 두경부 CT에 대한 적용 가능성 평가

손상준,박장필,김민정,유숙현,Son, Sang Jun,Park, Jang Pil,Kim, Min Jeong,Yoo, Suk Hyun 대한방사선치료학회 2014 대한방사선치료학회지 Vol.26 No.1

목 적 : 두경부 치료계획 CT영상에서 dental implant로 인한 metal artifact 발생 시 O-MAR(Metal artifact Reduction for Orthopedic Implants)(ver. 3.6.0, Philips, Netherlands)를 적용할 수 있을지 여부를 평가하고자 한다. 대상 및 방법 : 모든 CT영상은 Brilliance Big Bore CT(Philips, Netherlands)에서 관전압 120kVp, 2mm 두께로 촬영하였으며, O-MAR를 이용하여 Metal artifact reduction 후 전산화치료계획장비(Eclipse ver 10.0.42, Varian, USA)로 원본영상과 비교, 분석하였다. O-MAR의 기본적인 성능 테스트를 위해 Metal artifact가 발생하지 않은 영상과 발생한 영상에서 O-MAR 적용시, HU 변화를 검증하기 위해 원통형 팬텀과 cerrobend 막대, 불균질 팬텀을 이용하여 실험하였다. 각각의 원본 영상과 O-MAR 적용 영상에서 관심영역 내 HU 변화를 측정하였다. 이를 바탕으로 본 연구의 주목적인 dental implant로 인한 metal artifact 발생 영상을 재현하기 위해 팬텀을 제작하여 사용하였고, 실제 임상 환자 영상에 O-MAR를 적용한 영상과 원본 영상 그리고 artifact 부분을 보정한 영상의 선량 분포를 SNC Patient(Sun Nuclear Co., USA)로 비교하였다. 결 과 : 두경부에서의 metal artifact를 재현한 원본 영상과 O-MAR 적용영상의 선량 분포를 비교한 결과 gamma passing rate 는 2 mm / 2% 기준으로 99.8%, 일치를 보였다. 실제 임상 환자 영상을 바탕으로 O-MAR 적용 전후 영상과 density corrected CT 영상에 동일한 조건으로 치료 계획을 수립하여 선량 분포를 비교한 결과는 98.5% 일치로 비교적 높은 gamma passing rate를 보였다. 전체적인 선량 분포 차이는 모두 2% 이내로 팬텀 실험과 실제 임상 환자 영상 실험에서 비슷한 결과로 나타났다. 하지만 선량 편차가 적더라도 국소적으로 집중되어 있는 것은 문제의 소지가 될 가능성이 있다. 화질 개선 면에서는 모든 실험에서 O-MAR 적용영상이 원본에 비해 개선됨을 알 수 있었으나, 두경부 metal artifact를 재현한 팬텀 영상 air cavity 내에서 최대 HU 값이 상승하는 경우가 생겼고, 환자 영상에서는 air cavity가 tissue로 잘못 보정되는 경우 또한 발견할 수 있었다. 결 론 : 업체에서 제시한 사용제한 사항인 피부 근처와 저밀도 영역이 공존하는 두경부에서 O-MAR의 사용 가능성을 확인해 본 결과, 원본의 왜곡과 보정이 동시에 일어났다. 심지어 팬텀 실험보다 더 심한 artifact가 생긴 환자의 경우 air cavity가 tissue로 잘못 보정되는 경우도 발생하였다. 결과적으로 아직까지는 O-MAR 알고리즘이 air cavity와 photon starvation artifact를 정확히 구분하지 못하는 것으로 보인다. 선량 측면에서의 영향은 임상에서 배제될 만큼 큰 차이를 보이지는 않았다. 임상에서 원본과 O-MAR 적용 영상을 비교하며 작업한다면 contouring, artifact 보정작업, DRR 화질 개선 등에 도움을 받을 수 있을 것으로 사료된다. Purpose : The purpose of this study is evaluation for the applicability of O-MAR(Metal artifact Reduction for Orthopedic Implants)(ver. 3.6.0, Philips, Netherlands) in head & neck radiation treatment planning CT with metal artifact created by dental implant. Materials and Methods : All of the in this study's CT images were scanned by Brilliance Big Bore CT(Philips, Netherlands) at 120kVp, 2mm sliced and Metal artifact reduced by O-MAR. To compare the original and reconstructed CT images worked on RTPS(Eclipse ver 10.0.42, Varian, USA). In order to test the basic performance of the O-MAR, The phantom was made to create metal artifact by dental implant and other phantoms used for without artifact images. To measure a difference of HU in with artifact images and without artifact images, homogeneous phantom and inhomogeneous phantoms were used with cerrobend rods. Each of images were compared a difference of HU in ROIs. And also, 1 case of patient's original CT image applied O-MAR and density corrected CT were evaluated for dose distributions with SNC Patient(Sun Nuclear Co., USA). Results : In cases of head&neck phantom, the difference of dose distibution is appeared 99.8% gamma passing rate(criteria 2 mm / 2%) between original and CT images applied O-MAR. And 98.5% appeared in patient case, among original CT, O-MAR and density corrected CT. The difference of total dose distribution is less than 2% that appeared both phantom and patient case study. Though the dose deviations are little, there are still matters to discuss that the dose deviations are concentrated so locally. In this study, The quality of all images applied O-MAR was improved. Unexpectedly, Increase of max. HU was founded in air cavity of the O-MAR images compare to cavity of the original images and wrong corrections were appeared, too. Conclusion : The result of study assuming restrained case of O-MAR adapted to near skin and low density area, it appeared image distortion and artifact correction simultaneously. In O-MAR CT, air cavity area even turned tissue HU by wrong correction was founded, too. Consequentially, It seems O-MAR algorithm is not perfect to distinguish air cavity and photon starvation artifact. Nevertheless, the differences of HU and dose distribution are not a huge that is not suitable for clinical use. And there are more advantages in clinic for improved quality of CT images and DRRs, precision of contouring OARs or tumors and correcting artifact area. So original and O-MAR CT must be used together in clinic for more accurate treatment plan.

서울대학교병원의 방사선치료 환자 통계에 관한 고찰

윤일규,박장필,최병돈,박진홍,박흥득 대한방사선사협회 2002 대한방사선사협회지 Vol.28 No.1

용적세기조절회전치료 치료계획 확인에 사용되는 MapPHAN의 유용성 평가

우헌,박장필,민제순,이제희,유숙현,Woo, Heon,Park, Jang Pil,Min, Jae Soon,Lee, Jae Hee,Yoo, Suk Hyun 대한방사선치료학회 2013 대한방사선치료학회지 Vol.25 No.2

목 적: 최신 선형가속기와 새로운 평가 장비를 도입하게 되어 이를 임상에 적용하기 위한 준비과정 중 몇 가지 문제가 발생하여 유용성을 확인하는 과정을 분석함으로써 앞으로 이 장비를 도입하는 기관에 도움이 되고자 한다. 대상 및 방법: 모든 측정은 TrueBEAM STX (Varian, USA)를 이용하였으며, 전산화치료계획장비(Eclipse ver 10.0.39, Varian, USA)를 이용하여 각 에너지 별, 조사조건 별 선량분포파일을 산출하였다. MapCHECK 2의 고유의 성능과 오차로 발생 할 수 있는 원인에 대하여 측정 및 분석하였다. MapCHECK 2의 성능 확인을 위해 6X, 6X-FFF (Flattening Filter Free), 10X, 10X-FFF, 15X의 에너지별로 필드사이즈 $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$ 방향에서 측정을 하였다. 또한 기존 IGRT couch의 CT값이 volumetric dosimetry에 영향을 주는지 확인을 위해서, CT 넘버 값: -800 (Carbon) & -950 (COUCH안의 공기), -100 & -950을 지정해준 상태에서 6X-FFF, 15X의 에너지별로 필드사이즈 $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$, $135^{\circ}$, $275^{\circ}$ 방향에서 측정을 하였고, MapPHAN에 할당된 HU 값 확인을 위해 Solid water phantom 3 cm을 위로 얹은 MapCHECK 2와 치료계획용 컴퓨터를 이용해 비교하였고, MapPHAN의 각진 모서리에 의한 측정오류문제, MapPHAN의 gantry 방향 의존성을 알아보기 위해 3가지 방법으로 측정 하였다. 세로로 세운 세팅 상태에서 6X-FFF, 15X를 GANTRY $90^{\circ}$, $270^{\circ}$ 방향에서 각각 측정하고, 가로로 세운 세팅상태에서 에너지 6X-FFF, 15X를 필드사이즈 $10{\times}10$ cm, $90^{\circ}$, $45^{\circ}$, $315^{\circ}$, $270^{\circ}$의 방향에서 각각 측정하였다. 세 번째로 빔의 세기조절을 하지 않은 상태에서 open arc를 조사하였다. 결 과: MapCHECK의 기본 성능을 확인, Couch에 의한 감약 측정, MAP-PHAN에 할당하는 HU값 측정, MapPHAN의 각진 모서리에 대한 계산 정확도 확인을 위한 측정에서 모두 유효한 범위에 들어와 측정오류에 영향을 미치지 않는 것을 확인 할 수 있었다. Gantry 방향의존성 확인하기 위한 3가지 방법 중 첫 번째로 측정기를 세운 상태에서의 값은 Gantry $270^{\circ}$ (상대적 $0^{\circ}$), $90^{\circ}$ (상대적 $180^{\circ}$)에서 6X-FFF, 15X에서 각각 -1.51, 0.83%와 -0.63, -0.22%를 나타내어 AP/PA 방향에 의한 영향이 없음을 나타냈다. 측정기를 가로로 세팅한 상태에서는 Gantry $90^{\circ}$, $270^{\circ}$에서 에너지 6X-FFF 4.37, 2.84%, 15X에서는 -9.63, -13.32%의 차이가 측정되어 gamma pass rate 3%의 값보다 큰 값을 나타내므로 MapPHAN에 의한 측방향 측정값이 유효범위 안에 들지 못하는 것을 확인 할 수 있었다. 마지막 Open Arc에서 6X-FFF, 15X 에너지를 필드사이즈 $10{\times}10$ cm에 $360^{\circ}$ 회전상태에서의 선량분포를 보면 pass rate가 90% 가까이 나오는 것을 확인 할 수 있다. 결 론: 위 결과를 토대로 MapPHAN은 상대등선량분포 감마값 측정에는 적합 하지만, 측방향 빔에 대한 gantry 방향의 의존성 때문에 절대선량은 정확한 측정을 할 수 없는 것으로 판단되어진다. 본 논문에서는 더욱 정확한 치료계획 확인을 위해서 VMAT 같은 회전조사시 측방향에 대한 오차를 줄이고 정확한 절대선량을 측정하기 위해서 MapCHEK 2와 IMF (Isocentric Mounting Fixture)의 조합을 사용하여 gantry 방향 의존성에 의한 영향을 최소화 할 수 있을 것이 Purpose: Latest linear accelerator and the introduction of new measurement equipment to the agency that the introduction of this equipment in the future, by analyzing the process of confirming the usefulness of the preparation process for applying it in the clinical causes some problems, should be helpful. Materials and Methods: All measurements TrueBEAM STX (Varian, USA) was used, and a file specific to each energy, irradiation conditions, the dose distribution was calculated using a computerized treatment planning equipment (Eclipse ver 10.0.39, Varian, USA). Measuring performance and cause errors in MapCHECK 2 were analyzed and measured against. In order to verify the performance of the MapCHECK 2, 6X, 6X-FFF, 10X, 10X-FFF, 15X field size $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$ direction was measured by the energy. IGRT couch of the CT values affect the measurements in order to confirm, CT number values : -800 (Carbon) & -950 (COUCH in the air), -100 & 6X-950 in the state for FFF, 15X of the energy field sizes $10{\times}10$, gantry $180^{\circ}$, $135^{\circ}$, $275^{\circ}$ directionwas measured at, MapPHAN allocated to confirm the value of HU were compared, using the treatment planning computer for, Measurement error problem by the sharp edges MapPHAN Learn gantry direction MapPHAN of dependence was measured in three ways. GANTRY $90^{\circ}$, $270^{\circ}$ in the direction of the vertically erected settings 6X-FFF, 15X respectively, and Setting the state established as a horizontal field sizes $10{\times}10$, $90^{\circ}$, $45^{\circ}$, $315^{\circ}$, $270^{\circ}$ of in the direction of the energy-6X-FFF, 15X, respectively, were measured. Without intensity modulated beam of the third open arc were investigated. Results: Of basic performance MapCHECK confirm the attenuation measured by Couch, measured from the measured HU values that are assigned to the MAP-PHAN, check for calculation accuracy for the angled edge of the MapPHAN all come in a range of valid measurement errors do not affect the could see. three ways for the Gantry direction dependence, the first of the meter built into the value of the Gantry $270^{\circ}$ (relative $0^{\circ}$), $90^{\circ}$ (relative $180^{\circ}$), 6X-FFF, 15X from each -1.51, 0.83% and -0.63, -0.22% was not affected by the AP/PA direction represented. Setting the meter horizontally Gantry $90^{\circ}$, $270^{\circ}$ from the couch, Energy 6X-FFF 4.37, 2.84%, 15X, -9.63, -13.32% the difference. By-side direction measurements MapPHAN in value is not within the valid range can not, because that could be confirmed as gamma pass rate 3% of the value is greater than the value shown. You can check the Open Arc 6X-FFF, 15X energy, field size $10{\times}10$ cm $360^{\circ}$ rotation of the dose distribution in the state to look at nearly 90% pass rate to emerge. Conclusion: Based on the above results, the MapPHAN gantry direction dependence by side in the direction of the beam relative dose distribution suitable for measuring the gamma value, but accurate measurement of the absolute dose can not be considered is. this paper, a more accurate treatment plan in order to confirm, Reduce the tolerance for VMAT, such as lateral rotation investigation in order to measure accurate absolute isodose using a combination of IMF (Isocentric Mounting Fixture) MapCHEK 2, will be able to minimize the impact due to the angular dependence.