http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Pechini법에 의한 Ga<sub>2</sub>O<sub>3</sub>:Eu<sup>3+</sup> 형광체 분말의 제조
박인용,이종원,김선태,Park, In-Yong,Lee, Jong-Won,Kim, Seon-Tai 한국재료학회 2002 한국재료학회지 Vol.12 No.7
Europium-activated $Ga_2$$O_3$ phosphor powders were prepared by Pechini method from the mixed aqueous solutions of gallium(III) nitrate, europium(III) nitrate, ethylene glycol and citric acid. The phase formation process and particle shape of the powders obtained were investigated by means of TG/DTA, XRD and SEM. It was found that the powders were amorphous or ${\gamma}$-$Ga_2$$O_3$-like phase up to $500^{\circ}C$ and then transformed into $\beta$- $Ga_2$$O_3$ phase above $600 ^{\circ}C$. The powders calcined below $1000^{\circ}C$ were spherical and nanometer-sized. Photoluminescence spectra measured at room temperature showed that the highest luminescence intensity was obtained for the sample synthesized under the conditions of 2 mol% Eu concentration and heat treatment at $1000^{\circ}C$.
박인용,이병선 대한전자공학회 1971 전자공학회지 Vol.8 No.1
A survey meter which is used a G-M counter sensitive to beta and gamma radiation is studied. This device is completely transistorized, operated with battery, and can be read directly the 3 full-scale meter range: 2.5, 25 and 250 MR/HR respectively. The collector-coupled monostabel multivibrator consisting of a counting-rate meter circuit, and the astable blocking oscillator consisting of a dc-de converter for power supply are analyzed and derived the design dquations. To improve the resolving time of the G-M counter the device is designed to be triggered by low pulse in the order of 0.5v. G-M 계수관을 이용한 beta와 gamma 선에 민감한 survey meter에 관한 연구이다. 이 장치는 완전 transistor화 되어 있으며 건전지로 동작하게 되어 있고 2.5, 25 및 250MR/HR의 3가지의 full-scale meter range를 직독하게 되어 있다. Counting-rate meter 회로를 이루고 있는 collector 결합 단안정 multivibrator와 전원회로의 de-dc 변환로를 이루고 있는 무안정 blocking 발진기의 해석을 하였고 설계식을 유도하였다. G-M 계수관의 분해시간을 높이기 위하여 0.5v 정도의 낮은 전압으로 triggering할 수 있게 설계하였다.
박인용,정혜경,김완수 한국교육과정평가원 2019 교육과정평가연구 Vol.22 No.1
본 연구는 국가수준 학업성취도 평가가 표집 체제로 전환됨에 따라 국가수준의 표본 통계 결과의 정확성 및 대표성을 제고하기 위한 목적으로 시뮬레이션 연구를 수행함으로써 기존의 전수체제에서 적용되었던 표집설계에 대한 개선 방안을 제시하였다. 이를 위해 2016년 학업성취도 평가 전수 자료를 토대로 표집 방법, 표집 규모, 외층 변인, 목표 표집 학교 수 결정을 위한 기준학급 크기에 대한 조건을 다양화하여 표집 설계에 적용하고 각각에서 산출된 표본 통계와 모집단 통계를 비교하였다. 연구 결과, 군집 표집보다는 층화표집의 적정성 및 다른 구간에 비해 1.5%에서 3% 표집 시 정확도 향상의 효율성을 확인하였으며, 표집 자료의 대표성 제고 차원에서 학생수 감소에 따라 실제 학급 당 학생 수를 반영할 수 있는 기준학급 크기 선정, 지역규모를 반영한 외층 변인의 확대 방안이 제시되었다. 도출된 시사점은 학업성취도 평가뿐만 아니라 대규모 평가에서의 표집 설계 개선에 유용한 정보로 활용될 수 있다. The purpose of the present study is to improve the sampling design of the National Assessment of Educational Achievement (NAEA) to enhance the representativeness of the sampled data and the accuracy of statistical estimates. Based on the census data of 2016 NAEA, we conducted a simulation study by varying sampling methods, sample size, explicit stratification variable, and the expected class size, and compared the results from sampled data with the census results. The study found the appropriateness of stratified sampling relative to cluster sampling and efficiency of 3% sampling, and suggests revision of the expected class size reflecting the real educational settings, and inclusion of area size as an explicit stratification to improve the representation of the sampled data. The study implications can be used for improving sampling design in large scale assessments.