http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박용욱,나상엽,Park, Yong-Wook,Na, Sang-Yeob 한국전자통신학회 2010 한국전자통신학회 논문지 Vol.5 No.1
Bottom gate and top gate field-effect transistor based carbon nanotube(CNT) were fabricated by CMOS process. Carbon nanotube directly grown by thermal chemical vapor deposition(CVD) using Ethylene ($C_2H_4$) gas at $700^{\circ}C$. The growth properties of CNTs on the device were analyzed by SEM and AFM. The electrical transport characteristics of CNT FET were investigated by I-V measurement. Transport through the nanotubes is dominated by holes at room temperature. By varying the gate voltage, bottom gate and top gate field-effect transistor successfully modulated the conductance of FET device. 본 연구에서는 기존의 반도체 공정을 이용하여 bottom gate, top gate구조의 탄소나노튜브 트랜지스터를 제작하였다. 게이트 특성에 따른 특성을 연구하기 위하여 열화학 기상 증착법(CVD)으로 탄소나노튜브를 디바이스에 직접 성장시키고, 탄소나노튜브의 성장 특성 및 I-V동작 특성을 분석하였다. 제작된 탄소나노튜브 FET는 p-type, 즉 hole이 다수 캐리어로 존재하는 트랜지스터이며 구동전압에 따라 conductance 변화하는 특성을 보였다.
박용욱,Park, Yong-Wook 한국전자통신학회 2015 한국전자통신학회 논문지 Vol.10 No.1
본 논문에서는 LTE 통신을 위한 1.8 GHz 대역의 이중 T 구조 안테나를 연구하였다. 선로 방식으로는 마이크로 스트립 방식과 CPWG 방식을 채택하였고 특성 평가를 위해 안테나 제작 및 특성을 측정하였다. 각 선로방식의 안테나를 주파수와 반사손실에 관한 파라미터 특성을 HFSS(High Frequency Structure Simulator)를 통해 분석하고 이것을 이용하여 안테나를 설계하였다. 실제 제작한 1.8 GHz 대역의 이중 T 구조 안테나가 보여준 특성은 중심주파수 1.79 GHz 에서 입력반사손실 -23.26 dB, 대역폭 23 MHz의 결과 값을 보여 주었다. In this paper, we studied the design and fabrication of dual T type antenna to be used in LTE communication systems operating at around 1.8 GHz band. In order to improve of frequency properties of antenna, single feed microstrip patch antenna and CPWG antenna was simulated by HFSS(High Frequency Structure Simulator). The fabricated dual T type antennat showed that the measured center frequency, the minimum return loss and -10dB bandwidth were 1.79 GHz, -23.26 dB and 23 MHz, respectively.
의존문법 기반의 구간 분할법을 활용한 한국어 구문 분석기
박용욱,Park, Yong-Uk 한국정보통신학회 2009 한국정보통신학회논문지 Vol.13 No.8
최근 대부분의 한국어 구문분석기는 의존문법(Dependency Grammar)을 사용하고 있는데, 그 이유는 한국어의 특성인 어순이 비교적 자유롭고 생략이 잦은 문장에 대한 처리가 용이하기 때문이다. 하지만 의존문법을 이용한 한국어 구문분석은 많은 중의성을 도출하는 문제점이 대두되고 있다. 본 논문에서는 이러한 중의성을 보다 효과적으로 해결하기 위하여 200개가 넘는 의존문법 규칙과 문장의 구성성분을 이용한 구간분할방법, 관형형어미가 붙은 용언에 대한 처리 및 같은 용언에 중복된 구성성분 결합제한 방법을 사용한 구문분석기를 제안한다. 실험 결과 중의성 제거에 많은 효과가 있음을 보여준다. Recently, most Korean syntactic analysis systems use Dependency Grammar, because it is quite good to analysis of Korean language structures. But Dependency Grammar makes many ambiguities during syntax analysis of Korean. We implement a system which decreases many ambiguities in syntax analysis. To decrease ambiguities we suggest several methods. First, we use about 200 dependency rules, second, we suggest a new segmentation method and third, one predicate can not have more than one subject or object. Using these methods, we can reduce many ambiguities in Korean syntactic analysis.
Electrical Properties of a Piezoelectric Transformer for an AC-DC Converter
박용욱 한국물리학회 2010 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.57 No.41
The electrical properties of a ring/dot piezoelectric transformer were analyzed for applications as an AC-DC converter using the step-down behavior of a piezoelectric transformer. The ring/dot piezoelectric transformer was prepared using Pb(Mn1/3Nb2/3)O3 and Pb(Zn1/3Nb2/3)O3 modified Pb(Zr,Ti)O3 ceramics sintered at a relatively low temperature of 930 ℃ for 90 min. When the transformer was matched with a load resistance of 1000 Ω, it transferred a maximum power of 27 W. The maximum power was produced at a dc output voltage of 30 V and a matching load resistance of 1000 Ω. While the manufactured ring/dot piezoelectric transformer released the maximum power at a resonance frequency of 71 kHz, the available frequency bandwidth was about 1 kHz at most due to strong frequency dependence of the piezoelectric transformer. The output dc current was highly improved up to 905 mA because no anisotropy of poling direction existed in the ring/dot piezoelectric transformer. Under a commercial input of 220 Vac, AC-DC converter successfully produced 27 W at 30 Vdc and 905 mA.
박용욱,Park, Yong-Wook 한국전자통신학회 2013 한국전자통신학회 논문지 Vol.8 No.1
소형화된 고기능성 휴대용 전자기기의 수요 급증에 따라 기존에 사용되던 수평구조의 2차원 회로의 크기를 줄이는 것은, 전기 배선의 신호지연 증가로 한계에 도달했다. 이러한 문제를 해결하기 위해 회로들을 수직으로 적층한 뒤, 수평구조의 긴 신호배선을 짧은 수직 배선으로 만들어 신호지연을 최소화하는 3차원 집적 회로 적층기술이 새롭게 제안되었다. 본 연구에서는 차세대 반도체 소자의 회로 집적도를 비약적으로 증가시킬 수 있고, 현재 문제점으로 대두 되고 있는 선로의 증가, 소비전력, 소자의 소형화, 다기능 회로 문제를 동시에 해결 할 수 있는 3차원 구조를 갖는 회로소자에 대한 특성을 연구하였다. As a demand for the portable device requiring smaller size and better performance is in hike, reducing the size of conventionally used planar 2 dimensional integration circuit(IC) cannot be a solution for the enhancement of the semiconductor integration circuit technology due to an increase in RC delay among interconnects. To address this problem, a new technology of 3 dimensional integration circuit (3D-IC) has been developing. In this study, three-dimensional integrated device was investigated due to improve of reducing the size, interconnection problem, high system performance and functionality.
박용욱,Park, Yong-Wook 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.6
정보화시대에 발 맞춰 인터넷은 유선인터넷에서 무선인터넷으로 발전하게 되었다. 무선인터넷의 수요가 급증하자 기존에 사용된 2.4GHz대역의 통신은 포화상태에 이르게 되었으며 효율과 성능이 현저히 떨어지게 되었다. 본 논문에서는 T-슬롯 마이크로 스트립 안테나가 가지는 좁은 대역폭의 단점을 개선할 수 있는 U-슬롯을 채택하여 5 GHz 대역의 마이크로 스트립 배열 안테나를 연구하였다. 최적의 주파수 특성을 얻기 위하여 단일 안테나와 배열 안테나의 최적화 과정을 진행하였으며, 이를 기반으로 $2{\times}2$ 배열 방식을 통한 U-슬롯 마이크로스트립 배열 안테나의 가능성을 확인하였다. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4GHz band which leads to saturation of the communication was significantly fall. in this paper, the U-slot microstrip array antenna in the 5 GHz band have been studied to improve the drawback of a narrow bandwidth of the T-slot micro strip antenna. The characteristics of single antenna and array antenna was investigated to obtain the optimum frequency properties. The optimal U-slot microstrip array antenna possibility was confirmed.
박용욱,Park, Yong-Wook 한국전자통신학회 2012 한국전자통신학회 논문지 Vol.7 No.1
In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively. 본 논문에서는 신호 분리와 합성이 가능한 다이플렉서를 설계 제작한 후 특성을 비교 분석하였다. 저역 통과 필터와 고역 통과 필터의 특성을 정합하여 다이플렉서로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호 분리와 합성의 가능성을 입증하기 위해 실제 마이크로 스트립 구조로 제작하여 측정한 결과 다이플렉서의 저역통과 필터는 -0.4 dB의 삽입손실과 -30 dB의 반사손실, 1.6 GHz의 차단수파수 특성을 보였고 고역 통과 필터는 -0.8 dB의 삽입손실과 약 -30 dB의 반사손실, 1.9 GHz의 차단수파수 특성을 갖는 것을 확인할 수 있었다.
박용욱,Park, Yong-Wook 한국전자통신학회 2011 한국전자통신학회 논문지 Vol.6 No.6
본 연구에서는 5.150-5.350GHz까지 동작하는 무선랜용 $1{\times}2$ 마이크로 스트립 패치 어레이 안테나를 최적화 설계를 수행한 후 제작한 안테나의 특성을 비교 분석하였다. 측정 결과, 제작된 배열 안테나의 중심 주파수 5.214GHz, 반사손실은 -41.17dB이고 제작한 안테나의 대역폭은 258MHz로 설계목표인 200MHz보다 광대역의 대역폭을 얻을 수 있었고 VSWR은 1.1로 원하는 설계 목표값 만족하였으며, 임피던스 또한 $50{\Omega}$에 근접한 $49.724{\Omega}$을 값을 구현할 수 있었다. In this study, $1{\times}2$ microstrip patch array antenna of 5.150 - 5.350GHz for wireless LAN was investigated and analyzed after optimizing the antenna parameters. From the measurement result, we obtained that the center frequency of the antenna is 5.214GHz and -41.17dB of the insertion loss, and 258MHz of bandwidth. The fabricated antenna has VSWR value of 1.1 and impedance value of $49.724{\Omega}$.
박용욱,Park, Yong-Wook 한국전자통신학회 2010 한국전자통신학회 논문지 Vol.5 No.5
현 농촌사회는 점차 고령화 사회가 되어감에 따라 노동력 감소 문제점이 발생하고 있다. 본 연구을 통하여 생육 단계별 수위를 자동 컨트롤하여 관리할 수 있는 농작물의 수위 조절 시스템 연구 개발하였다. 수위측정에는 초음파 센서를, 급 배수로의 수문 제어에는 서보모터를 사용하고 이들의 신호를 처리하는 제어부로는 ATmega128을 사용하였다. 본 시스템을 통하여 노동력 감소의 문제점을 해결하고 농촌사회의 자동화 발전 및 고령화 사회에 큰 기여를 기대 할 수 있을 것이다. A reducing labor is a big issue in rural community due to a increasingly aging society. In this paper, the water control system for corps production with a function of automatically controls and solar energy system is developed. The water level was measured by ultrasonic sensor and water gate was controlled by using servo motor. The system had included ATmega 128 control unit for signal controls. The water level control system will be able to contribute to the aging rural society.