지수형 온도변화를 이용한 표면 열전달의 측정

박병규,홍택,박상희,Park, Byung Kyu,Hong, Taek,Park, Sang Hee 대한기계학회 1999 大韓機械學會論文集B Vol.23 No.9

A single blow, transient testing method for determining the heat transfer characteristics of heat exchanger surfaces are presented. The exponential inlet temperature variations were made using screen mesh with small time constant and frontal velocities of the test section. The system is used to investigate the usefulness of a model with exponential inlet temperature variations. A data reduction program is developed to calculate the temporally and spatially averaged heat transfer coefficient using the measured disturbance and response of the fluid temperature. The results are compared with the existing theoretical and experimental data for parallel plate stacks. It was recommended to take an average for the time greater than the 99% of the final temperature had reached in order to obtain fairly good results.

유동방향의 열전도가 전열면의 성능에 미치는 영향

박병규,홍택,박상희,Park, Byung-Kyu,Hong, Taek,Park, Sang-Hee 대한설비공학회 1999 설비공학 논문집 Vol.11 No.5

The effects of longitudinal heat conduction on the performance of heat transfer surfaces are investigated by using a single-blow method. In the transient testing method for determining the heat transfer characteristics, exponential inlet temperature variations are made by using screen-mesh heater with small time constant and low frontal velocities of the test section, and the experimentally determined inlet temperature profile is used as the inlet fluid temperature condition. The effects of longitudinal heat conduction are negligible only if $\gamma^\act<0.05\;and \;N_{tu}\le3$ and should be considered if $N_{tu}\le3$ The test results ate compared with the existing theoretical and experimental data and the validity of this technique is confirmed by the good agreement.

음악제작을 위한 음성합성엔진의 활용과 기술

박병규,Park, Byung-Kyu 한국디지털콘텐츠학회 2010 한국디지털콘텐츠학회논문지 Vol.11 No.2

음악제작에 쓰이는 음성합성엔진은 악기 소리와 음색의 합성에 머물던 과거의 신디사이저와는 달리, 인간의 목소리를 각 음소에 따라 샘플화하여 탑재함과 동시에 각 음소의 연결을 주파수 영역 내에서 자연스럽게 처리함으로써 실제 사람이 노래하는 것과 같은 수준까지 도달하게 되었다. 사용자들은 이러한 음성합성엔진을 음악제작에 국한하여 쓰지 않고 캐릭터를 활용한 콘서트, 영상제작, 음반, 모바일 서비스 등 2차 창작물로 새로운 음악의 형태를 창조하며 문화적 패러다임을 바꾸어 나가고 있다. 현재 음성합성엔진 기술은 악보 편집기를 통하여 사용자가 원하는 음과 가사, 그리고 음악적 표현 파라미터를 입력한 뒤, 실제 가성 샘플을 데이터베이스에서 가져와 합성엔진에서 발음들을 조합, 연결하여 노래하는 것을 가능하게 한다. 이러한 컴퓨터음악 기술의 발전으로 인해 파생된 새로운 음악 형태들은 문화적으로 큰 반향을 불러일으키고 있다. 이에 따라 본 논문은 구체적 활용 사례를 살펴보고 합성기술을 탐색함으로써, 사용자들이 음성합성엔진을 이해하고 습득하는 데 기여함과 동시에 그들의 다양한 음악제작에 도움이 되고자 한다. Differently from instruments which synthesized sounds and tones in the past, voice synthesis engine for music production has reached to the level of creating music as if actual artists were singing. It uses the samples of human voices naturally connected to the different levels of phoneme within the frequency range. Voice synthesis engine is not simply limited to the music production but it is changing cultural paradigm through the second creations of new music type including character music concerts, media productions, albums, and mobile services. Currently, voice synthesis engine technology makes it possible that users input pitch, lyrics, and musical expression parameters through the score editor and they mix and connect voice samples brought from the database to sing. New music types derived from such a development of computer music has sparked a big impact culturally. Accordingly, this paper attempts to examine the specific case studies and the synthesis technologies for users to understand the voice synthesis engine more easily, and it will contribute to their variety of music production.

액정 스마트윈도우의 신뢰성에 대한 연구

박병규,김순금,이승우,박계춘,이진,Park, Byung-Kyu,Kim, Sun-Geum,Lee, Seung-Woo,Park, Gye-Choon,Lee, Jin 한국전기전자재료학회 2020 전기전자재료학회논문지 Vol.33 No.6

In recent years, the challenge of higher energy efficiency has emerged as urban buildings have become taller, and the area of window glasses has increased. To address the problem of energy efficiency in buildings, research on smart windows is being actively conducted. In this study, an accelerated experiment for thermal stability was conducted to fabricate a liquid crystal cell applicable to external windows. It was confirmed from the study that the function is maintained even in a high-temperature external environment through the change in transmittance by voltage. Compared with the initial transmittance, after the passage of time, the smart window cell to which the sealant was applied showed a small change in transmittance of 1~2%. This result confirmed the thermal stability of the liquid crystal-based smart window.

태양전지 변환 효율 향상을 위한 근적외선 파장 변환 필름에 관한 연구

박병규,박계춘,이진,Park, Byung Kyu,Park, Gye Choon,Lee, Jin 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.11

The amount of electric power for photovoltaic power generation depends on the location of the power plant and the direction of solar cell. The solar cell controls the generation of solar power plants. Therefore, the structure of solar cell, manufacturing method, and optic technology were factors contributing to increased solar cell efficiency; however, the technical limit has been reached. Herein, we propose a new method to increase the solar cell efficiency using a wavelength conversion technology that converts ultraviolet and infrared rays, which are not effectively used in solar cells, into effective wavelength of solar cell. We used fluoride $Na(Ca)YF_4$ phosphor for wavelength conversion. Then, a wavelength-conversion fluorescent paste, prepared using an organic-silicon binder, was used to prepare a film that was applied to Si solar cells. It was confirmed that conversion efficiency improved by 5% or more.

인공지능을 이용한 빌딩 구성요소의 열동역학 특성

박병규(Byung Kyu Park),김찬중(Charn-Joon Kim) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.4

FRP 시트로 보강한 조적 벽체의 강도 증진

박병규(Park, Byung-Kyu),배백일(Bae, Baek-Il),최현기(Choi, Hyun-Ki),최창식(Choi, Chang-Sik) 한국콘크리트학회 2010 한국콘크리트학회 학술대회 논문집 Vol.2010 No.11

메소스케일 유연 외팔보 센서를 이용한 진동유동의 무선 계측

박병규(Byung Kyu Park),이준식(Joon Sik Lee) 대한기계학회 2013 大韓機械學會論文集B Vol.37 No.5

곤충을 비롯한 많은 생물은 매질의 진동을 감지할 수 있는 다양한 감각기관을 이용하여 외부 교란을 감지하고 서로 통신하며 생명 유지활동을 하고 있다. 가장 가까이 접하는 진동유동의 대표적인 예로는 인체의 호흡을 들 수 있다. 본 연구에서는 마이크로제조 공정을 통해 메소스케일 저항식 감지소자, 특히 외팔보 형상의 유연 감지소자를 이용한 유량측정법을 제안하고, 무선통신을 이용한 유동측정시스템화 및 휴대화의 가능성을 고찰하였다. 탄성계수가 낮은 기질재료를 사용함으로써 온·습도에 영향을 받지 않는 건강 진단용 호흡센서로서의 가능성 및 확장성을 확인하였다. 또한 유동감지 센서의 측정데이터를 분석한 결과, 정밀성과 신뢰성은 마이크로 컨트롤러의 분해능, 노이즈 제거기술에도 의존하는 것으로 나타났다. 이 시스템에서 패킷 간의 최소 전송소요 시간은 약 16 ms로 나타났다. This paper describes a flexible wireless telemetering system using a mesoscale cantilever sensor, which is microfabricated with a patterned thin Ni-Cu foil on a resin substrate. The dynamic validation of the sensor has been conducted in a flow. The wireless telemetry is used to obtain data regarding the oscillating flows. It is shown that the sensor is nearly independent of the environmental temperature and is suitable for application to primary healthcare and diagnostic devices. It can be easily integrated with other modules for measuring physiological parameters, e.g., blood pressure, oxygen saturation, and heart rate, to increase the convenience and reliability of diagnosis. The precision and reliability of the sensor are also dependent on the design of the analog front-end and noise reduction techniques. It is shown that the present system’s minimum interval between packet transmissions is ~16 ms.

인공 감각모의 동적 거동에 미치는 진동유동의 영향

박병규(Byung Kyu Park),이준식(Joon Sik Lee) 대한기계학회 2011 大韓機械學會論文集B Vol.35 No.8

주위 매질의 움직임에 반응하는 섬유상 감각모는 대부분의 생물체에 존재하여 먹이, 침입자, 또는 동족 여부를 감지하는 역할을 한다. 이 기능을 모방한 인공 감각모를 설계 제작하기 위하여 유연 감각모를 기초로 한 수학모델을 제안하고, 작동영역에서의 응답특성을 파악하기 위하여 매개변수 해석을 수행하고 각 인자들의 영향을 고찰하였다. 유동 감각모의 변위를 일반화 좌표 및 고유 진동모드로 나타낸 결과, 탄성계수가 비교적 큰 Cytop 감각모의 경우 고유진동의 기본모드가 지배적인 것으로 나타났다. 주어진 유동 중에 있는 감각모의 동적거동은 형상에 크게 의존하였다. 또한 탄성계수가 큰 인공 감각모에 서는 생물학적으로 중요한 주파수 범위 내에서 공진현상은 나타나지 않았다. Filiform hairs that respond to movements of the surrounding medium are the mechanoreceptors commonly found in arthropods and vertebrates. The hairs function as a sensory system for perceiving information produced by prey, predators, or conspecifics. A mathematical model is proposed, and the parametric analyses for the response of artificial filiform hair are conducted to design and predict the performance of a microfabricated device. The results for the Cytop hair, one of the most popular polymer optical fibers (POFs), show that the fundamental mode has a dominant effect on the hair behavior in an oscillating medium flow. The dynamic behavior of sensory hair is also dependent on the physical dimensions such as length and diameter. It is found that the artificial hair with a high elastic modulus does not show a resonance in the biologically important frequency range.

실시간 제어기를 이용한 마이크로 열식 질량공기 유량센서의 열특성 측정

박병규(Byung Kyu Park),이준식(Joon Sik Lee) 대한기계학회 2009 大韓機械學會論文集B Vol.33 No.8

A thermal mass air flow sensor, which consists of a micro-heater and thermal sensors on the silicon-nitride thin membrane structure, is micro-fabricated by MEMS processes. Three thermo-resistive sensors, one for the measurement of microheater temperature, the others for the measurement of membrane temperature upstream and downstream of the micro-heater respectively, are used. The micro-heater is operated under the constant temperature difference mode via a real time controller, based on inlet air temperature. Two design models for microfabricated flow sensor are compared with experimental results and confirmed their applicabilities and limitations. The thermal characteristics are measured to find the best flow indicator. It is found that two normalized temperature indicators can be adopted with some advantages in practice. The flow sensor with this control mode can be adopted for wide capability of high speed and sensitivity in the very low and medium velocity ranges.