http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비정질 $WO_3$ 박막과 전해질 계면에서의 리튬 층간 반응의 교류 임피던스 해석
민병철,주재백,손태원,Kim Byoung-Chul,Ju Jeh-Beck,Sohn Tae-Won 한국전기화학회 1998 한국전기화학회지 Vol.1 No.1
To AC impedance study was performed in this study on the interfacial reaction between organic electrolyte and amorphous tungsten oxides thin film, cathodically coloring oxide, prepared by e-beam evaporation method in the 1 M $LiClO_4/PC$ organic solution. The electrochemical reactions at the interface were analyzed by the transient method and the complex impedance spectroscopy. The impedance spectrums showed that the electro-chemical intercalation of lithium cations was consisted of the following three steps; the first step, the charge transfer reaction of lithium cation at the interface between amorphous tungsten oxides thin film and the organic electrolyte, the second step, the adsorption of lithium atom on the surface of amorphous tungsten oxides thin film, and then the third step, the absorption and the diffusion of lithium atom into amorphous tungsten oxides thin layer. The bleaching and the coloring characteristics of amorphous tungsten oxides thin film were explained in terms of thermodynamic and kinetic variables, the simulated $R_{ct},\;C_{dl},\;D$ and $\sigma_{Li}$ by CNLS fitting method. Especially it was found that the limiting values of electrochromic reaction were the molar ratio of lithium, y=0.167 and the electrode potential, E=2.245 V (vs. Li). 본 연구에서는 전자-선 증발법으로 제조된 비정질의 텅스텐 산화물 박막과 전해질 계면에서 진행되는 전기화학반응을 1 M $LiCLO_4/PC$유기 전해질 계면에서 비정질의 텅스텐 산화물 박막 내부로 삽입된 리튬의 양론 값과 박막 전위의 변화에 대하여 연구하였다. 특히 복소수 임피던스 스펙트럼으로부터 제안된 박막과 전해질 계면의 등가 회로는 리튬의 층간 반응 기구가 텅스텐 산화물 박막/유기 전해질 계면에서 리튬 이온의 전하 전달 현상, 텅스텐 산화물 박막에 리튬의 흡착현상 및 박막 내부로의 리튬의 흡수 및 확산 현상으로 구성되어 있다는 것을 알 수 있었다. 또한 CNLS fitting법에 의하여 시뮬레이션된 $R_{ct},\;C_{dl},\;D$, 및 $\sigma_{Li}$ 등의 열역학 및 속도론적 변수 값 등의 상관 관계로부터,비정질의 텅스텐 산화물 박막의 소. 발색 특성은 이들 변수값과 관련이 있었으며, 특히 $Li_y,WO_3$, 박막 내의 리튬의 몰비 y=0.167및 전극 전위 E=2.25 V(vs. Li)에서 전기 발색의 한계값을 갖는 것으로 조사되었다.
e-beam 증발법으로 제조된 비정질 WO<sub>3</sub>박막과 전해질 계면으로 삽입되는 리튬의 층간 반응에 관한 전기화학적 특성
민병철,손태원,주재백,Min, Byoung-Chul,Sohn, Tae-Won,Ju, Jeh-Beck 한국공업화학회 1997 공업화학 Vol.8 No.6
본 연구에서는 1M $LiClO_4/PC$ 유기 용액 중에 존재하는 리튬 이온의 층간 반응에 의하여 전기 발색 현상을 나타내는 전자-선 증발법으로 제조된 비정질의 텅스텐 산화물 박막과 전해질 계면에서의 전기화학적 특성들을 연구하기 위하여 음극 Tafel 분극법, 순환 전류-전위법 및 전기량 적정법 등의 전기화학 측정법과 X선 회절 분석법을 이용한 박막의 결정 상태 조사 등이 수행되었다. 특히 다중 순환 전류-전위 곡선으로부터 리튬 이온의 층간 반응은 발색 반응에 대한 인가 과전압이 약 1.0V 이내에서는 안정된 소 발색의 가역적 현상을 나타내었으나, 발색 반응에 대한 인가 과전압이 1.5V일 때는 발색 시 삽입된 박막 내부의 리튬이 소색 시 완전히 빠져 나오지 못하여, 박막 내부에 리튬이 축적되는 현상을 나타내었으며, 적은 순환 횟수임에도 불구하고 소 발색의 전류 밀도가 감소되는 것이 조사되어 발색에 필요한 인가 과전압의 한계가 존재함을 알 수 있었다. This work was performed to study the characteristics of electrochemical intercalation reactions occurring at the interface between the organic electrolyte and tungsten trioxide thin film (thickness of $4000{\AA}$) prepared by e-beam evaporation method as cathodically coloring oxide with regard to the electrochromism by the intercalating reactions of the lithium cation in the 1M $LiClO_4/PC$ organic solution. The characteristics of electrochemical intercalation reactions were investigated by various DC electrochemical methods such as cathodic Tafel polarization test, multiple and the single sweep cyclic voltammetry and the coulomety titrations method. The surfaces of thin films were observed with the patterns of X ray diffraction after the coloring and bleaching reactions. In comparison with the previous results that $WO_3$ thin film intersely detached from the surface of electrode when the hydrogen cation was intercalated into $WO_3$ thin film in the o.1N $H_2SO_4$ aqueous solution, the intercalation reaction of lithium cation into $WO_3$ thin film in the 1M $LiClO_4/PC$ organic solution was shown that the stable bleaching and coloration was appeared within 1.0V of the applied overpotential. When the overpotential of electrochromic reaction for lithium cation in the 1M $LiClO_4/PC$ organic solution had been applied up to 1.5V, the accumulation phenomenon of lithium in amorphous $WO_3$ thin film layer occurred because the inserted lithium into amorphous $WO_3$ thin layer for coloring process was not fully removed from the thin layer to the electrolyte during bleaching process. It was found that there is a limitation of applied overpotential for coloring process by the reduction of the current densities of bleaching and coloration after few number of coloring and bleaching cycles.
Quad-rotor UAV의 동역학적 모델링과 비행자세 최적화를 위한 PID 제어기 설계
민병철,조찬호,최경민,김동한 경희대학교 경희정보통신 SoC연구소 2008 경희정보통신SOC연구소 논문집 Vol.9 No.-
In this paper, we present a design of quad-rotor aircraft that is a type of unmanned air vehicle (UAV)because of their strong advantages of minimized size and their powerful capabilities for monitoring environment. The nonlinear model of 6 degrees of freedom (6 DOF) quad-rotor aircraft in air is derived on the basis of the Newton-Euler formalism. Because the derived model that comprises translational and rotational subsystems is dynamically unstable, we set on a nonlinear control strategy for the quad-rotor aircraft. The control strategy includes PID controller that is common in the nonlinear control for the translational subsystem and the rotational subsystem of the quad-rotor aircraft. The optimal coefficients of PTD controller are measured by the computer simulation and the results verify the effectiveness of the proposed control strategy for the quad -rotor aircraft. Finally we demonstrate experimentally stability of the small-scale quad-rotor aircraft by using a wireless camera on it to get distinct images of surrounding environment. The manufactured aircraft is equipped with four rotors generating various dynamics, two embedded controllers using PID controller, and a navigation system based on gyro sensors, an accelerometer sensor and an ultrasonic sensor.
셀프리더십의 영향요인과 효과: 의료기관 조직구성원을 중심으로
민병철,임성원,김한결,이현실 한국보건행정학회 2013 보건행정학회지 Vol.23 No.1
The purpose of this empirical study is to investigate the factors of self-leadership depending on individual characteristics, job characteristics, and qualities of leader-member exchange. Additionally, this study aims to discover the effect of self-leadership’s outcome factors on organizational citizenship behavior and innovative activities. In order to verify research model and hypothesis, questionnaires were collected from department members working at general hospitals, hospitals, and clinics in metropolitan area of Seoul, which were 85 departments and 344 respondents. Collected data were analyzed with SPSS ver. 19.0 and Amos ver. 18.0 statistical package using Structural Equation Model. The results of the analysis showed that both individual characteristics and job characteristics have significant positive effect on self-leadership. Also, self-leadership had significant positive relationship on innovative action and organizational citizenship behavior. The implications of this study are as follow. First, this study empirically explained how self-leadership is applied in healthcare organizations. Second, it verified the relationship between causal factors and outcome factors of self-leadership. Also, prior researches of self-leadership have been conducted on business companies, but this study explored self-leadership at healthcare organizations, which increased external validity. Nowadays, many people are interested in the effect of leadership in order to overcome issues coming from enlarged organizations and to improve performance. Self-leadership will contribute to maximizing voluntary efforts of human resources and performance in a rapidly changing healthcare industry.
비대칭 단면을 갖는 박벽 곡선보의 안정성해석 II : 수치적 방법
민병철,김문영 한국전산구조공학회 1998 한국전산구조공학회논문집 Vol.11 No.4
본 논문에서는 연계논문에서 제시한 비대칭 박벽단면을 갖는 곡선보 및 직선보 이론을 토대로, 곡선보 요소 및 직선보 요소를 개발하고 이를 이용한 유한요소 정식화 과정을 제시한다. 유한요소 정식화 과정에서는 요소의 변위장을 도심에 대하여 정의한 후, 요소 변위벡터에 관한 3차의 Hermitian 다항식을 형상함수로 사용하고 가우스 적분을 행함으로써 탄성 강도행렬 및 기하학적 강도행렬을 산정하였다. 얻어진 강도행렬을 이용하여 고유치 문제를 계산함으로써 좌굴하중을 계산하였으며 다양한 해석 예제를 통하여 다른 연구자들의 해석 결과와 비교 검토함으로써 본 연구의 타당성과 우수성을 입증하고자 한다.
비대칭 단면을 갖는 박벽 곡선보의 안정성해석 I: 해석적 방법
민병철,김문영 한국전산구조공학회 1998 한국전산구조공학회논문집 Vol.11 No.4
본 연구에서는 비대칭 박벽단면을 갖는 곡선보의 안정성해석을 수행할 수 있는 이론 및 엄밀해를 제시하기 위하여, 3차원 연속체로부터 유도된 평형방정식으로부터 선형화된 가상일의 원리를 적용하였다. 박벽단면의 구속된 (warping)과 곡률효과를 고려하고 유한한 회전각의 2차항을 포함하는 곡선보의 변위장을 도입하여 단면에 대해 적분함으로써 도심축에 대한 박벽 곡선보의 총포텐셜에너지를 유도하였다. 또한, 단순지지되고 일축대칭 단면을 갖는 박벽원형 곡선보의 면내 및 면외좌굴에 대한 엄밀해를 유도하기 위하여, 면내에 대해서는 균일압축을 받는 원형아치의 역대칭 좌굴모드에 대한 좌굴하중을 유도하고 면외좌굴에 대해서는 균일압축 및 순수휨을 받는 아치의 처짐함수를 가정하여 곡선보의 횡좌굴하중에 대한 일반해를 제시하였다.