http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
부산시 남부하수처리시설과 인근 하천에서 발생하는 악취물질 확산 특성
문성만 ( Seong Man Mun ),이형돈 ( Hyung Don Lee ),조상원 ( Sang Won Cho ),강동효 ( Dong Hyo Kang ),박해식 ( Hae Sik Park ),오광중 ( Kwang Joong Oh ) 한국환경과학회 2011 한국환경과학회지 Vol.20 No.8
The covered stream of cities are considered an odor source. Also, the public do not want a wastewater treatment plant(WWTP) near their properties due to the emission of odor emanating from such sources, although they play an important role in urban development. The purpose of this study is to analyze the pattern distribution of the odorous compounds from the Nambu WWTP and Youngho stream in Busan. odor sampled four times were analyzed by instrumental analysis method and indirect olfactory method. The kinds of offensive odorous compounds examined are acetaldehyde, propion aldehyde, hydrogen sulfide, methyl mercaptan, dimethyl sulfide and ammonia. Also, Concentration of air pollutants has been calculated by ISCST3 models. At the result of this study, The Nambu WWTP releases sulfur compounds. And the major odorous were hydrogen sulfide (1,475 ppb) and acetaldehyde (95 ppb) at Youngho stream. The stink which residents feel will point out the Nambu WWTP mainly if the odor is removed with the improvement of a Youngho stream. Accordingly, we should pay more attention to appropriate components to processes in odor reducing plan at Nambu WWTP.
착유방식 및 지방 보충급여가 원유 및 지방특성에 미치는 효과
문주연 ( Ju Yeon Moon ),이전성 ( Jin Sung Lee ),장경만 ( Kyeong Man Chang ),박성민 ( Seong Min Park ),박승용 ( Seung Yong Park ),정문웅 ( Mun Yhung Jung ),손용석 ( Yong Suk Son ) 한국유가공기술과학회 2015 한국유가공기술과학회지 Vol.33 No.3
AMS와 CMS 및 보호지방의 급여 여부가 우유 성분과 유지방 특성에 미치는 영향을 조사하기 위하여 본 연구를 실시하였다. 착유방식과 보호지방 급여 여부에 따라 AMS 및 CMS목장을 각 4개소씩 선정하여 월 1회 집합유 원유시료를 채취하였으며, 총 5개월간 유성분, 유지방구(MFG) 크기, 지방산 및 유리지방산 조성을 분석하였다. 착유방식에 따른 일반 유성분, MFG 크기, 지방산 조성의 유의적 차이는 관찰되지 않았으나, AMS로 착유된 우유의 유리지방산 함량이 CMS로 착유된 우유에 비해 유의적으로(p<0.05) 높았으며, 이는 AMS의 착유 횟수가 CMS에 비해 더 많았기 때문인 것으로 판단된다. 보호지방을 급여한 농장의 우유를 비급여 농장과 비교하였을 때 유성분에는 차이가 없었으나 장쇄지방산(LCFA)함량이 더 높은 것으로 나타났으며, 유지방구의 크기 또한 증가하는 경향을 보였는데 이는 급여한 보호지방의 주요지방산인 LCFA가 유지방으로 전이되었기 때문으로 해석된다. 또한 공시한 모든 AMS 목장에서 원유의 산패문제는 발생하지 않았는데, 유리지방산 함량이 CMS에 비해 유의적으로 높았지만 산패를 일으킬 정도로 높은 수준은 아니었던 것으로 판단된다. 이상의 결과를 바탕으로 할 때 AMS는 유성분 및 유지방 특성의 측면에서 CMS 대비 주목할 만한 차이를 보이지 않았으며 보호지방의 급여는 유지방구 크기 및 장쇄지방산농도에 영향을 미치므로 향후 목장형 유가공을 실시할 경우이를 응용할 여지가 있을 것으로 사료된다. This study was carried out to investigate the effects of different milking systems (AMS, automatic milking system and CMS, conventional milking system) and of supplemental fat feeding on milk composition and milk fat characteristics. The composition, MFG (milk fat globule) size, fatty acids (FAs), and free fatty acids (FFAs) of the milk from 4 AMS and 4 CMS dairy farms were analyzed on the basis of the milking system and feeding of protected fat. The milking system did not affect milk composition, MFG size, and milk FAs, but FFA content of AMS milk were significantly higher than that of CMS milk. Feeding of protected fat resulted in the production of milk much higher in LCFAs (long chain FAs); however, the milk composition was not affected by fat supplementation. Cows administered protected fat supplements produced milk containing MFGs with a large average diameter.
정해권(Hae-Kwon Jeong),하만영(Man-Yeong Ha),김경천(Kyung-Chun Kim),전충환(Chung-Hwan Jeon),최호진(Ho-Jin Choi),주재천(Jae-Chun Joo),문정만(Jeong-Man Mun),황성기(Seong-Ki Hwang) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.11
According to the development of the economy and to the improvement in life quality, it is increased for the desire for the comfortable circumstance in the underground subway station. And recently, an accident, fire, suicide and so on have been risen. An advanced countries have introduced PSD, and they satisfies with the effect of PSD. The optimum design standard to set up PSD have to satisfy the by train wind beyond the maximum static pressure. This paper includes the maximum static pressure what can be applied to the PSD installation design.
이우석,박성호,윤인하,백금문,김정만,김대섭,Lee Woo-Suk,Park Seong-Ho,Yun In-Ha,Back Geum-Mun,Kim Jeong-Man,Kim Dae-Sup 대한방사선치료학회 2005 대한방사선치료학회지 Vol.17 No.2
Purpose : We should use a computed tomography-simulator for the body measure and compensator manufacture process was practiced with TBI's positioning in process and to estimate the availability.,Materials and Methods : Patient took position that lied down. and got picture through computed tomography-simulator. This picture transmitted to Somavision and measured about body measure point on the picture. Measurement was done with skin, and used the image to use measure the image about lungs. We decided thickness of compensator through value that was measured by the image. Also, We decided and confirmed position of compensator through image. Finally, We measured dosage with TLD in the treatment department.,Results : About thickness at body measure point. we could find difference of $1{\sim}2$ cm relationship general measure and image measure. General measure and image measure of body length was seen difference of $3{\sim}4$ cm. Also, we could paint first drawing of compensator through the image. The value of dose measurement used TLD on head, neck, axilla, chest(lungs inclusion), knee region were measured by $92{\sim}98%$ and abdomen, pelvis, inquinal region, feet region were measured by $102{\sim}109%$.,Conclusion : It was useful for TBI's positioning to use an image of computed tomography-simulator in the process. There was not that is difference of body thickness measure point, but measure about length was achieved definitely. Like this, manufacture of various compensator that consider body density if use image is available. Positioning of compensator could be done exactly. and produce easily without shape of compensator is courted Positioning in the treatment department could shortened overall $15\{sim}20$ minute time. and reduce compensator manufacture time about 15 minutes.