http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
GIS를 통한 만리포 해변의 정밀 육도-해도 접합 및 분석
김진아(Jinah Kim),심재설(Jae Seol Shim),임학수(Hak Soo Lim),민인기(Inki Min) 대한공간정보학회 2008 한국지형공간정보학회 학술대회 Vol.2008 No.6
연안에서의 태풍ㆍ해일에 의한 침수범람 지역 예측을 위하여 GIS를 통한 정밀 육도-해도 접합 및 분석을 만리포 해변을 대상으로 시범 수행하였다. 만리포 해변의 정밀 육도-해도 접합을 위하여 고해상도 지상 LIDAR 시스템의 시범 측량 자료와 국토지리정보원의 수치지형도, 국립해양조사원의 수치해도 수심자료 및 한국 주변해역의 30초격자 수심자료를 사용하였다. 또한 평균해수면 산정을 위하여 만리포에 설치된 수압식파고계 조위자료와 해변의 표척을 통한 목측 관측을 통한 조위자료를 활용하였다. 다양한 자료의 GIS 기반 육도-해도 접합 및 분석을 통한 정밀 지형도 구축 기술은 태풍ㆍ해일에 의한 침수범람 예측을 위한 정밀 격자 수치모델의 입력 자료로 활용되어 침수ㆍ범람 예측 결과의 재해도(Hazard Map) 작성이 가능하고, 나아가 침식ㆍ퇴적 등의 지속적인 해안선 변화 모니터링에 활용될 수 있다.
희박 예혼합 연소기에서 연료 조성이 화염전달함수 특성에 미치는 영향
김진아 ( Jinah Kim ),김지환 ( Jihwan Kim ),이정원 ( Jeongwon Lee ),김대식 ( Daesik Kim ) 한국액체미립화학회 2015 한국액체미립화학회지 Vol.20 No.3
Flame transfer function is used to determine the relationship between flow fluctuations and heat release perturbations in a lean premixed gas turbine combustor. The characteristics of flame transfer function are known to depend greatly on flame geometries in addition to other various flow conditions. However, it is not easy to experimentally measure the flame transfer function under various actual combustor operating conditions in terms of time and cost. The current research tries to model the flame transfer function using CFD(Computational Fluid Dynamics). From the results, it is shown that the calculated steady flame geometry can be exactly captured with consideration of the wall heat transfer and radiations. Also, unsteady analysis results show the close characteristics of the flame transfer function to the measured one in both gain and phase.
수업 설계에서 AI 활용에 대한 예비교사와 중등교사의 인식 분석
김진아(Kim, Jinah),소애진(Xiao, Aijin),김현지(Kim, Hyunji) 한국교육방법학회 2021 교육방법연구 Vol.33 No.4
본 연구는 수업 설계에서 AI 활용에 대한 예비교사와 중등교사의 인식을 조사하는 데 목적이 있다. 수업 설계의 각 단계에서 AI의 활용에 대해 어떻게 인식하고 있는지, 향후 수업에서 AI를 도입하여 활용할 때 기대하는 점과 우려하는 점은 무엇인지에 대해 알아보았다. 이를 위해 예비교사와 중등교사를 대상으로 설문조사를 실시하였다. 모든 문항에 성실하게 응답한 예비교사 216명, 중등교사 223명, 총 439명의 응답자료를 빈도분석, t검증, 일원분산분석, 워드클라우드로 분석하였다. 수업 설계에서 AI 활용에 대한 인식을 살펴본 결과 7개 문항에서 예비교사와 중등교사의 인식에 유의한 차이가 나타났으며, 집단별로 인식 평균이 높은 문항을 분석하였다. 또한 중등교사 경력에 따라 유의한 차이가 나타났다. 예비교사와 중등교사 모두 수업 설계에 AI가 도입되었을 때 ‘학습자>교사>AI’ 순으로 수업의 주도권을 갖는 형태의 수업을 운영해 보고 싶다는 응답이 가장 높게 나타났다. 반면, 예상되는 미래 수업의 형태는 ‘AI>학습자>교사’의 순으로 주도권을 갖는 수업의 형태가 될 것이라는 응답이 가장 높게 나타났다. 예비교사는 AI 도입 및 활용 시 편리함과 학습자 분석에 용이함 등을 기대하고 있으며, AI에 지나친 의존과 교사 역할 축소를 우려하였다. 중등교사는 AI 도입 및 활용 시 학습자 분석, 학습자 요구분석, 개인별 맞춤형 수업에 대한 기대가 높았으며, 정서적 요소 간과, 지나친 AI 의존, 정서적 교감 어려움 등을 우려하였다. The purpose of this study is to investigate the perceptions of pre-service and secondary school teachers on the use of AI in instructional design. We investigated how they perceive the use of AI at each stage of instructional design, and what they expect and are concerned about when using AI in future classes. For this reason, a survey was conducted targeting pre-service teachers and secondary teachers. There were 216 pre-service teachers and 223 secondary school teachers who faithfully answered all questions, a total of 439. Response data were analyzed by frequency analysis, t-test, one-way ANOVA, and word cloud. As a result of investigating the perceptions of AI utilization in instructional design, a significant difference was found in the perceptions of pre-service teachers and secondary teachers in seven items. Items with a high recognition average were derived for each group. There was also a significant difference depending on the secondary teacher career. We also presented the instruction with AI that pre-service and secondary school teachers would like to implement and the future the instruction with AI that are expected. Finally, pre-service teachers expected convenience and ease of learner analysis when using AI. They were concerned about excessive dependence on AI and reduction of teacher roles. On the other hand, secondary school teachers had high expectations for learner analysis, need analysis of learner, and personalized instruction. They were concerned about overlooking emotional factors, excessive dependence on AI, and difficulty in emotional communication.
탄소 나노 튜브- 실리콘 고무 합성 소재를 이용한 고효율, 신축성 마찰대전 발전 소자
김진아(Jinah Kim),김기용(Giyoung Kim),김성열(Sung yeol Kim),박진형(Jinhyong Park) 대한기계학회 2021 대한기계학회 춘추학술대회 Vol.2021 No.4
마찰 대전 발전 소자(TENG)는 서로 다른 두 물질 간 접촉-분리 움직임을 통해 마찰 대전 효과와 정전기 유도 간의 결합 효과를 사용하는 기계적 에너지 발생기이다. (Fan, Tian et al. 2012) 마찰 대전 발전 소자는 다기능 및 휴대용 전자 제품에 에너지를 공급하기위한 대체 전원으로 제안된다. TENG는 기계적 에너지를 사용하기 때문에 기계적 움직임에 쉽게 적용할 수 있는 유연성과 신축성이 필요하다. (Liu, Li et al. 2019) 이 연구에서 CNTs-Dragon Skin 실리콘 고무 나노 복합체를 사용하여 고성능을 나타내며 뛰어난 신축성을 보이는 TENG 를 구현하였다. 마이크로/나노 엔지니어링 된 전극을 TENG에서 사용하여 전극의 표면적에 따른 커패시턴스 증가를 유도하고 이에 따른 TENG의 출력 변화를 분석하였다. 전극 물질과 유전층의 접촉이 TENG 출력에 미치는 영향을 분석하기 위하여 유전 물질의 CNT 양과 분석법에 따른 출력 특성의 변화를 측정하였다. 또한 TENG의 출력에 미치는 전극의 두께 효과를 분석하였다. CNTs-Dragon Skin TENG의 CNTs 농도에 따른 인장특성을 확인하고, 다양한 application에 적용을 위하여 인장 후 접촉-분리 움직임에 따른 출력 변화 및 전극의 저항 변화를 확인하였다. The triboelectric nanogenerator (TENG) is the mechanical energy generator using coupling effect between triboelectric effect and electrostatic induction through the contact-separation motion of two different materials. It is strongly proposed as an alternative power source to supply energy for the multi-functional and portable electronics. Since the TENG uses mechanical energy, it requires flexibility and stretchability that can be easily applied to mechanical movements. In this study, high performance stretchable TENG was demonstrated using CNTs-Dragon Skin silicon rubber nanocomposite. A micro/nanoengineered electrode was used in TENG to induce an increase in capacitance according to the surface area of the electrode, and the change in the output of TENG was investigated. The effect of contact between the electrode material and the dielectric layer on the output of TENG was investigated by confirming the change in output characteristics according to the amount of CNT in the dielectric material and the dispersion method. In addition, we investigated the effect of thickness of electrode on the performance of TENG. The stretchability of CNTs-Dragon Skin TENG according to the CNTs concentration were investigated by measuring of stress-strain curve, in addition change in output and electrode resistance according to the stretching were investigated.
가스터빈 연소기에서 연료 조성이 화염전달함수 특성에 미치는 영향
김진아(Jinah Kim),이정원(Jeongwon Lee),김대식(Daesik Kim) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
가스 터빈 연소기에서 유동 섭동과 열 발생률 섭동과의 관계를 정량적으로 표현하기 위하여 화염 전달 함수가 널리 사용되고 있다. 화염 전달 함수는 다양한 유동 조건과 더불어 화염의 형상에 크게 의존하는 것으로 알려져 있다. 그러나, 실제 가스터빈 연소기 운영 환경에서 다양한 연료 및 유동 조건에 대하여 화염 전달 함수를 구하는 것은 시간 및 비용 측면에서 매우 제한적이다. 본 연구에서는 CFD 상용 코드를 이용하여 화염 전달 함수 해석 결과를 제시하고자 한다. 해석으로부터 정상상태의 화염형상을 실험을 통해 계측된 결과와 해석 결과를 비교하였을 때, 복사와 벽면 열전달 조건이 고려될 경우 화염의 형상이 실제와 매우 유사해짐을 확인하였다. 또한, 비정상 해석을 통하여 화염 전달 함수를 구한 결과, 이득값과 위상차 모두 실험값을 근접하게 예측하는 것으로 드러났다. Flame transfer function is generally used to represent quantitatively relationship between flow fluctuation and heat release perturbation in a lean premixed gas turbine combustor. The characteristics of flame transfer function are known to be greatly dependent on flame geometries as well as other various flow conditions. However, it is not easy to experimentally measure the flame transfer function under various actual combustor operating conditions in terms of time and cost. The current research tries to model the flame transfer function using CFD(Computational Fluid Dynamics). From the results, it is found that the calculated steady flame geometry can be exactly captured when considering the wall heat transfer and radiations. Also, unsteady modeling results show the close flame transfer function to the measured one in both gain and phase.