http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
재조합 대장균과 효모의 고정화 혼합세포계에 의한 ${\gamma}$-Glutamylcysteine 생산
김원근,구윤모 한국생물공학회 1995 KSBB Journal Vol.10 No.3
${\gamma}$-Glutamylcysteine 생산에 있어서 재조합 대장 균 HB101/pGH501만을 이용한 단일세포반응계가 재조합 대장균과 효모를 이용한 흔합서l포반응계보다 반응시간이 짧고 생산농도가 높은 것으로 나타났다. 그러나 생산경제성 측면에서 ATP 재생공정을 위하 여 훈합세포반응계를 사용하였다. 재조합 대장균과 효모를 이용한 혼합세포반응계에서 대장균과 효모의 비율은 1:4가 적합함을 보였고, ATP 재생공정에 사용되는 glucose는 O.5M의 농도에서 가장 효율적 으로 나타났다. 재조합 대장균과 효모를 alginate를 이용하여 고정화하여 반응계로 사용하였을 경우 반 응에 필요한 시간이 걸어지고 생산놓도도 감소되냐 반응계의 안정성은 10% 정도 증가됨을 알 수 있었다. 실험결과 alginate로 고정화된 흔합세포반응계 를 사용하여 ${\gamma}$-glutamylcysteine를 연속 생산할 수 있음을 확인하였다. ${\gamma}$-Glutamylcysteine production by the immobilized microbial system of recombinant Escherichia coli and yeast was investigated. ${\gamma}$-Glutamylcysteine was synthesized from L-glutamic acid and L-cysteine in the presence of ATP by the reaction catalyzed by ${\gamma}$-glutamylcysteine synthetase. An immobilized microbial cell system was developed for the efficient ${\gamma}$-glutamylcysteine production. Recombinant Escherichia coli and yeast were immobilized by alginate. Production of ${\gamma}$-glutamylcysteine was better with the recombinant Escherichia coli for both the synthesis of ${\gamma}$-glutamylcysteine and the ATP regeneration than the mixed system of recombinant Escherichia coli and yeast. The proper radio of recombinant Escherichia coli to yeast was experimentary observed to be 1:4 in the mixed system. Although the immobi1ized system had the slower reaction rate, its reaction stability was increased by 10%.
김원근,Kim, Wan-Kuen 한국생명보험의학회 1986 保險醫學會誌 Vol.3 No.1
Liver is an oragan which has various functions. For this functions in liver disease change variously, many methods of examination of them are invented. Each liver disease impairs these functions diversly rather than uniformly, thus it is possible to differentiate each disease by using various methods of testing it. Liver has high reproductive capacity and despite partial impairment of its function localized disease may not show any abnormality in liver function test due to compensation of remaining intact tissue of the liver. Thus the result of liver function test should be interpreted under adequate clinical investigation with other test, not depending on the liver function test only. This thesis deals with the composition, distribution in living body and clinical significance of liberating enzyme, GOT, GPT, and LDH which are included in serum enzyme that show abnormality in liver disease.
2P-147 M13 박테리오파지를 이용한 표면증강플라즈몬공명 센서 개발
김원근,김춘태,한지예,오진우 한국공업화학회 2017 한국공업화학회 연구논문 초록집 Vol.2017 No.1
본 연구진은 유전자 조작을 통해 특정 물질을 선택적으로 감지 가능한 기능성 M13 박테리오파지의 자기 조립을 이용하여 매우 민감하고 선택적인 표면 플라스몬 공명 센서 시스템을 구축하는 연구를 수행하였다. M13 박테리오파지 자기 조립 나노구조체를 특정 방향으로 이방성 정렬되도록 제조하여 표면 플라스몬 공명 센서의 민감도를 크게 향상시켰다. M13 박테리오파지의 표면에 약 2700개가 발현되어 있는 단백질인 pⅧ 단백질의 말단에 특이 결합 펩타이드 (His Pro Gln : HPQ)를 도입함으로써 생물학 분야에서 모델 시스템으로 빈번히 사용되는 물질인 스트렙타비딘에 대한 M13 박테리오파지의 높은 선택성과 민감도를 관찰하는데 성공했다. 자기 조립에 기반한 M13 박테리오파지 SPR 센서는 상대적으로 복잡한 포토 리소그래피 또는 화학 합성과 비교하여 제조 공정상 큰 장점을 지닌다. 특히 유전자 조작을 통한 기능성 물질의 제조는 고도로 균일한 기능성 고분자를 대량 생산 가능하다.
삼각형 돌출부의 크기 및 경사각이 전단파괴 형상 특성에 미치는 영향
김원근,최우용,박종덕,이석원,Kim, Won-Keun,Choi, Woo-Yong,Park, Jong-Deok,Lee, Seok-Won 한국터널지하공간학회 2013 한국터널지하공간학회논문집 Vol.15 No.4
Most of previous studies have insufficiently investigated the shear behavior and fracturing characteristics, experimentally in respect to the change of size of tooth-shaped surface asperity such as length and slope angle in a broad range. This study investigates the influence of the length and slope angle of a tooth-shaped surface asperity on the fracturing characteristics and the interface shear strength by using direct shear test apparatus. A total of 36 interface direct shear tests were conducted by changing the three types of slope angle of surface asperity, four type of length, and three types of normal stress. The shape of fractured surface after the test was quantified by using a three-dimensional surface roughness measurement apparatus. Through the experimental test results, the characteristics of fractured shape of surface asperity according to the normal stress were investigated. In addition, fractured length and height were quantified at each slope angle of surface asperity under a certain normal stress condition. 기존의 연구에서 삼각형 돌출부의 크기 즉 돌출부 길이 및 돌출부 경사각 변화에 따른 전단거동 및 파괴 형상 특성에 대한 광범위한 실험적 연구는 부족하였다. 본 연구에서는 직접전단시험기를 사용하여 삼각형 돌출부의 전단거동에 있어서 돌출부의 길이 및 경사각 특성이 표면 돌출부의 파괴 형상 특성에 미치는 영향을 규명하고자 한다. 이를 위하여 돌출부 길이는 4가지로 변환하였고, 수직응력은 3가지로, 그리고 돌출부 경사각은 3개의 각도로 변환하면서 총 36회의 시험을 수행하였다. 시험을 수행한 시편은 3차원 형상측정기를 사용하여 파괴 형상 특성을 정량적으로 분석하였다. 이러한 시험을 통하여, 수직응력 변화에 따른 돌출부의 파괴 형상 특성을 조사하였다. 또한 각각의 경사각에서 돌출부의 길이를 변화시켜 시험을 수행함으로써, 특정 수직응력 하에서 돌출부가 파괴되는 길이 및 높이를 정의하였다.
김원근,이찬원,전홍표 경남대학교 환경문제연구소 2002 환경연구 Vol.25 No.-
A field study was conducted to investigate the removal efficiency and performance of contact oxidation treatment system installed and operated in two locations of stream flowing to the Masan Bay. The removal of organic matters from stream water flowing to the already eutrophicated bay is getting more important in order to restore the water quality. The removal efficiencies of BOD, SS and ABS loading rate were 52~63%, 50~70% and 60~85%, respectively, whereas 10~25% of total nitrogen and 25~40% of total phosphorus were only removed. The effluent water quality did not meet the goal class of water regulation standards. Inflow rates to contact oxidation treatment showed seasonal and hourly variations. The treatment capacity installed is now enough to handle the present inflows, thus it was suggested that this system should be operated to supply only the volume of oxygen to require the actual loading to the treatment system and the aeration system would be intermittently operated for the improvement of nitrogen and phosphorus removal. It was found that inflow rate should be controlled for detention time of contact oxidation to maintain at least more than 1.5 hr. When microbiological species of sludge and sludge accumulation in the lower steps of contact oxidation process was examined, proper draw-out of sludge from the system was also an important operating parameter.