http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
역광 이미지의 효율적인 컬러 색상 보정을 위한 Retinex 알고리즘의 성능 개선
김영탁(Young-Tak Kim),유재형(Jae-Hyoung Yu),한헌수(Hern-Soo Hahn) 한국컴퓨터정보학회 2011 韓國컴퓨터情報學會論文誌 Vol.16 No.1
본 논문은 상대적으로 대비도 차이가 크게 나타나는 역광 이미지에 대해서 Retinex 알고리즘을 적용하여 보정 했을 경우 발생하는 밝은 영역에서의 컬러성분의 손실을 개선하기 위한 새로운 기법을 제안한다. 역광 이미지의 경우 밝은 영역과 어두운 영역에 대한 밝기 차이가 매우 크게 발생하기 때문에 Retinex 알고리즘을 이용하여 영상의 대비도를 향상시킬 경우 밝은 영역에서의 컬러 성분이 손실되는 현상이 발생한다. 이러한 손실을 보완하기 위해서 원본 영상의 밝은 영역에 해당하는 컬러 성분을 Retinex 알고리즘으로 보정된 영상에 추가해준다. K-mean 알고리즘을 이용하여 원본 영상에서의 밝은 영역, 어두운 영역, 중간 영역을 분리하고 밝은 영역에 대해서의 컬러 성분을 추가적으로 복원해 주며, 중간 영역에 대해서는 히스토그램에서의 위치를 기준으로 밝고 어두운 성분에 대한 비율을 고려하여 각 비율에 따라 원본 영상과 Retinex 복원 영상의 밝기 값을 함께 이용하도록 한다. 제안하는 알고리즘의 성능 평가를 위해 역광 현상이 강하게 나타나는 자연영상들을 대상으로 적용하여 기존의 Retinex 알고리즘보다 우수한 성능을 가지고 있음을 보였다. This paper proposes a new algorithm that improve color component of compensated image using Retinex method for back-light image. A back-light image has two regions, one of the region is too bright and the other one is too dark. If an back-light image is improved contrast using Retinex method, it loses color information in the part of brightness of the image. In order to make up loss information, proposed algorithm adds color components from original image. The histogram can be divided three parts that brightness, darkness, midway using K-mean (k=3) algorithm. For the brightness, it is used color information of the original image. For the darkness, it is converted using by Retinex method. The midway region is mixed between original image and Retinex result image in the ratio of histogram. The ratio is determined by distance from dark area. The proposed algorithm was tested on nature back-light images to evaluate performance, and the experimental result shows that proposed algorithm is more robust than original Retinex algorithm.
김영탁(Young-Tak Kim),신해준(Hae-Joon Shin),김령민(Ryung-Min Kim) 한국정보과학회 2003 정보과학회논문지 : 정보통신 Vol.30 No.3
본 논문에서는 복구시간의 최소화 및 효율적인 복구자원 제공을 위해 세그먼트 자동복구 기법을 이용한 네트워크 고장 복구 방안을 제안한다. 세그먼트 자동복구는 대규모 통신망을 다수개의 소규모 서브네트워크로 분할하여 각 서브네트워크에서 자동복구를 수행하는데, 그 성능은 서브네트워크의 크기와 형태에 따라서 다양한 특성을 나타낸다. 대부분의 장애를 서브네트워크 내부에서 복구할 수 있기 때문에 복구시간이 줄어들게 된다. 본 논문에서는 서브네트워크의 분할에 있어서의 특성을 분석하고, 서브네트워크의 크기와 그에 따른 자동복구 방법의 성능을 비교하고 분석한다. 링크와 노드장애가 발생하는 환경에 대한 시뮬레이션 결과에서 제안된 세그먼트 자동복구 방법이 가장 짧은 복구 시간을 나타내었다. 특히 세그먼트 자동복구의 개념을 사용하는 SLSP(Shortest Leap Shared Protection) 방법과 비교했을 경우 복구 시간과 복구 자원 면에서 모두 우수한 성능을 나타내었다. In this paper, we propose a network fault recovery algorithm based on a segment restoration scheme to reduce restoration time and restoration resource. The proposed segment restoration scheme is based on network partitioning which divides a large network into several small subnetworks. The restoration performance of the proposed segment restoration scheme depends on the size and the topology of subnetworks. Since most faults can be restored in a subnetwork, restoration time is reduced obviously. We compare and analyze restoration performance according to the size of subnetworks and restoration schemes. From simulation results, the proposed segment restoration scheme has the shortest restoration time compared with other restoration schemes. Especially the restoration performance of the proposed segment restoration scheme is better than the SLSP, which is also a segment-based restoration scheme, in terms of restoration time and required restoration resource capacity.
GA를 이용한 PC 기반 Hand-Geometry 인식시스템의 Nail 영역 추출에 관한 연구
김영탁(Young-Tak Kim),김수정(Soo-Jong Kim),박주원(Ju-Won Park),이상배(Sang-Bae Lee) 한국지능시스템학회 2004 한국지능시스템학회논문지 Vol.14 No.4
최근 몇 년 동안 사람들의 고유한 생리적인 특징을 이용한 생체 인식은 새로운 학문으로서 연구 및 개발이 활발하게 진행되고 있다. 지금까지, 오로지 지문 인식만이 다른 생체 인식에 비해 확인과 식별 시스템들이 더 정교하고, 비싼 취득 인터페이스들과 인식 과정을 필요로 하기 때문에 온라인 보안 검사를 위하여 한정된 성공을 보았다. Hand-Geometry는 생체 인식의 확인 그리고 취득의 편리 때문에 식별 그리고 확인을 위하여 사용되고 있다. 그러므로, 본 논문은 이러한 특징을 가지는 손의 기하학적인 Hand-Geometry 인식 시스템을 제안하고자 한다. 해부학적인 관점에서, 인간의 손은 길이, 폭, 두께, 기하학적인 모양, 손바닥의 모양, 그리고 손가락들의 기하학적인 모양까지 특성으로 나타내어질 수 있다. 본 논문에서 제안한 Hand-Geometry 인식 시스템은 30개의 특징 데이터를 가진다. 그러나 특징 데이터 가운데 사용자의 Hand-Geometry의 특징에 따라 길이 데이터가 변하는 것을 실험적으로 발견하였다. 따라서 이와 같은 가변적인 길이 데이터를 안정화시키기 위하여 본 논문에서는 길이 데이터의 기준점을 손톱 아래 점으로 정하고, GA를 적용하여 보다 안정된 특징점을 추출하였다. Biometrics is getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry has been used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. Hence, it can be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. However, during experimentation, it was discovered that length measured from the tip of the finger was not a reliable feature. Hence, we propose a new technique based on Genetic Algorithm for extraction of the center of nail bottom, in order to use it for the length feature.
컴퓨터 활용 능력의 효과적인 교육성과 측정 및 분석을 위한 도구 및 과정
김영탁(Young-Tak Kim),심갑식(Gab-Sig Sim) 한국컴퓨터정보학회 2016 韓國컴퓨터情報學會論文誌 Vol.21 No.9
This paper is concerned with education courses operating practices for basic computer literacy training. In this study, we propose an example for students to effectively measure and evaluate the achievement of defined ability in the performance measurement and analysis, learning objectives and learning outcomes set in operation throughout the course. Through research and development use case presents the tools for teaching method and effective and objective measurement of the related subjects. And based on the results, we propose the possibility of utilizing NCS-based course operation and education certification. In this study, the measurement process is based on the association with the objective of the development and operation, and measurement tools, measuring tools for measuring learning outcomes associated with the curriculum design methods for the measurement and evaluation of the case of the operation of the course units of learning outcomes and the method proposed.
김영탁(Kim, Young-Tak),김해림(Kim, Hae-Rim),박영주(Park, Young-Ju),이해평(Lee, Hae-Pyeong) 한국화재소방학회 2008 한국화재소방학회 학술대회 논문집 Vol.2008 No.추계
We have carried out the test using the cone calorimeter and the smoke density chamber to evaluate the characteristics of the combustion for the car interior materials passed horizontal burning test. We have analysed many parameters related to fire hazard. These parameters are the ignition time, the heat release rate, the maximum average rate of heat emission, the flashover propensity and specific optical density. There was a significant difference in HRR and optical smoke density. The HRR was <TEX>$185{\sim}446kW/m^2$</TEX> and optical smoke density was <TEX>$119{\sim}1207$</TEX>. Only horizontal burning test was performed to evaluate the fire hazard for the car interior materials.
지능영상 알고리즘 및 네트워크 시스템 연동에 관한 연구
김영탁(Young-Tak Kim),박주원(Ju-Won Park),탁한호(Han-Ho Tack),이상배(Sang-Bae Lee) 한국지능시스템학회 2004 한국지능시스템학회 학술발표 논문집 Vol.14 No.2
본 논문은 인공지능형맞춤 신발제작을 위하여 맞춤형 신발에 필요한 화형제작용 데이터를 위한 3차원 측정장치를 통해 획득한 발의 형상을 이용하여 인공지능 기법을 기반으로 하는 특징 추출 및 적합한 화형을 얻어내는 방법을 제시하고, 화형 테이터를 네트워크를 통해 실시간적으로 확인하는 방법을 제시한다. 본 논문의 연구배경은 인터넷의 보편화된 보급으로 생산자 위주에서 소비자 위주와 소비자 참여의 생산시스템으로 변화에 있다. 이는 많은 회사들이 IT시스템과 다양한 웹 솔루션을 도입하여 생산, 판매, 유통 등을 하나로 묶는 온라인 오프라인의 결합형으로 발전시키고자 하는 현상에서 찾아 볼 수 있다. 신발의 경우 개개인의 신체조건이 다르고 유행과 개성을 추구하고자 하기 때문에 기존의 생산체계로는 한계가 있다. 측정데이타를 기반으로하는 맞춤 신발은 기존의 전통적인 수제화 방식과 대량생산 방식의 장점만을 취하여 저렴고 편리하게 제작된다. 또한 3차원 측정기를 이용한 인터넷쇼핑에 적합한 새로운 비즈니스 모델을 제시한다.