http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
균열선단 열림변위 {\delta}_5 R-곡선과 {\delta}_{BS} R-곡선의 비교연구
김엄기,남승훈,진욱,고성위,Kim, Eom-Gi,Nam, Seung-Hun,Jin, Uk,Go, Seong-Wi 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.3
Since the examination of CTOD problem revealed that the discrepancy among CTOD's was a matte., of definition, the relationships among parameters based on different definitions have been studied Particularly, the relationship between $\sigma$BS R-curve based on BS 7448 and R-curve based on the recently introduced $\sigma$5 parameter was investigated in this research. For the comparison, compact tension specimens of used 1Cr-0.5Mo steel, heat treated 1Cr-0.5Mo steel to mimic the new one, A12024-T6, and A12024-T351 were prepared and tested. Consequently, the relationship between $\sigma$5 and $\sigma$BS R-curves for tested materials were established by shifting the rotational center which could determined by rotation factor and ligament size.
불균질 취성재료 파괴인성에 미치는 두께효과의 확률적 연구
김엄기,고성위,정규동,Kim, Am-Kee,Koh, Sung-Wi,Jung, Gyoo-Dong 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.4
Fracture toughness of heterogeneous brittle materials such as poly crystalline ceramics used to present the size (thickness) effect as well as statistically distributed results. There is belief that both(size effect and scatter) must be associated with each other. However, no generally accepted theory has been established so far. Using statistical approach, a probabilistic modeling for the fracture toughness which describes the thickness effect was attempted in this paper, Weibull distribution of specific fracture energy(SFE)at local areas and Griffith criterion are applied to the model. In addition, the newly developed model was verified with experimental results of alumina.
김엄기 대한기계학회 1994 大韓機械學會誌 Vol.34 No.5
지금까지 고분자 재료에서의 일반적인 파괴역학 연구실태를 집약해보았다. 이 분야의 연구결과 들은 금속의 파괴역학 문제와는 다른 새로운 문제점을 지니고 있었다. 우리는 여기서 잘 짜여진 문제의 해를 구했다기 보다는 문제를 정의하는 수준에 있음을 느낄수 있었다. 더욱이 고려되고 있는 문제들조차 서로 독립적으로 연관성을 보이고 있지 못하다. 접근방법이 너무 이론적이어서 실제상황에 적합하지 않거나 실험적인 검증이 요구되고, 경우에 따라서는 경험적이어서 해석 적인 정량화가 필요한 경우가 많다. 의심할바 없이 이것이 고분자재료 파괴역학의 현실이며 앞 으로 좀더 많은 해석적, 실험적 연구가 이루어져 상황이 개선될 것으로 믿는다.
김엄기,차동진 한밭대학교 생산기반기술연구소 2002 생산기반기술연구소 논문집 Vol.2 No.1
In this research, we developed the δ_5 clip gage based on strain gage application and the adaptor which keep the ends of clip on two marked positions during test. The results of research are following: The δ_5 clip gage with gage length of 5㎜ and the calibrator were developed. The adaptor for the attachment of δ_5 clip gage to the specimen was developed. The accuracy and repeatability of δ_5 clip gage turns out to be good in comparison with those of conventional clip gages.
Polycarbonate의 소성역(Process Zone) 크기 예측을 위한 모델
김엄기 公州大學校工科大學生産技術硏究所 1994 論文集 Vol.2 No.-
Polycarbonate 내에 발생하는 프로세스 존은 불균일한 전단대(shear band)로 구성되어 있다. 따라서 Chudnovsky 모델을 이용한 polycarbonate 프로세스 존 크기 예측은 이 모델이 갖고 있는 한계성(이 모델은 프로세스 존을 균일한 제 2 상으로 취급한다) 때문에 샐제값과 큰 차이를 나타낸다. 본 연구에서는 Chudnovsky 모델의 일반화를 통하여 불균일한 polycarbonate 프로세스 존에 적용 가능한 크기 예측 모델을 개발하였다. 실험결과 새롭게 개발된 모델에 의한 예측값이 실험값과 일치하는 좋은 결과를 보였다. 또한 모델 사용에 부수되는 계산식의 풀이 방법을 제시하여 새 모델을 이용할 때 오는 어려움을 제거했다. Since the process zone in polycarbonate consists of inhomogeneous shear bands, the application of Chudnovsky Model based on the homogeneous process zone to ploycarbonate is not suitable. In fact, there is significant difference between the size predicted by the model and the experemental result. A generalization of Chudnovsky Model for the polycarbonate process zone is attempted in this paper. The newly generalized model shows good prediction in terms of process zone size. In addition, the numerical method to solve the equations involved in the model is described.
전기비저항을 이용한 1Cr-1Mo-0.25V강의 인성열화도 평가
남승훈,유광민,김엄기 韓國非破壞檢査學會 1998 한국비파괴검사학회지 Vol.18 No.1
사용중인 터빈 로터에서 균열이 발견된다면 그 안전성을 평가하기 위해서는 제조 당시의 재료물성 데이터가 아닌 열화된 재료의 물성 및 인성을 사용해야 한다. 본 연구에서는 시험재료로 터빈 로터재로 널리 사용되고 있는 1Cr-1Mo-0.25V강을 사용하였다. 로터강의 경우 발전소에서 실제 사용된 열화재를 종류별로 입수하는 것은 매우 어렵기 때문에 실제로 열화된 재료의 미세조직과 유사한 미세조직을 갖는 시료를 얻기 위해서 실제 사용온도보다 높은 630℃에서 등온 열화처리하여 열화도가 다른 7종류의 시료를 만들었다. 열화도와 재료의 인성을 비파괴적으로 평가하기 위하여 직류 전위차법을 이용하였으며, 상온에서 전기비저항을 측정하였다. 열화도의 증가에 따라 전기비저항과 재료인성은 일정시간까지는 감소하는 것으로 나타났으며, 전기비저항과 인성과의 상관관계를 만들었다. 따라서 이를 이용하여 비파괴적으로 재료인성을 평가할 수 있는 기초를 마련하였다. Remaining life of turbine rotors with a crack can be assessed by the fracture toughness of the aged rotors at service temperature. DC potential drop measurement system was constructed in order to evaluate material toughness nondestructively. Test material was 1Cr-1Mo-0.25V steel used widely for turbine rotor material. Seven kinds of specimen with different degradation levels were prepared according to isothermal aging heat treatment at 630℃. Electrical resistivity of test material was measured at room temperature. It was observed that material toughness and electrical resistivity decreased with the increase of degradation. The relationship between fracture toughness and electrical resistivity was investigated Fracture toughness of a test material may be determined nondestructively by electrical resistivity.