http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김성훈,김경훈,도환수,박주석,김경자,심광보,Kim, Seong-Hoon,Kim, Kyung-Hun,Dow, Hwan-Soo,Park, Joo-Seok,Kim, Kyung-Ja,Shim, Kwang-Bo 한국결정성장학회 2016 韓國結晶成長學會誌 Vol.26 No.2
본 연구에서는 열간가압소결법으로 SiC를 소결하여 균열자기치유 특성을 분석하였다. SiC는 $Al_2O_3$와 $Y_2O_3$를 소결조제로 $1950^{\circ}C$, 50 MPa, 아르곤(Ar) 분위기에서 소결하였다. 소결된 시편을 $3{\times}4{\times}40mm$, 절단 및 가공하고, Vickers 경도기를 이용하여 49.6 N으로 예비균열을 생성하였다. $1200{\sim}1400^{\circ}C$, 1~10시간 산화분위기에서 열처리한 후 XRD, SEM, 3점 굽힘강도를 측정하였다. $1300^{\circ}C$ 1시간에서 741 MPa, 5시간에서 770 MPa로 가장 우수한 균열자기치유 효과를 나타내는 것으로 분석되었다. In this study, it was investigated that characteristic of crack-self-healing of hot-pressed SiC. SiC ceramics was sintered with $Al_2O_3$ and $Y_2O_3$ sintering additive by hot press. Sintering was performed in hot-press furnace in flowing argon (Ar), holding for 3 hr under $1950^{\circ}C$ and 50 MPa. The sintered SiC was machined into 3-point bending strength specimen of $3{\times}4{\times}40mm$, and introduced pre-crack by Vickers indentation at 49.6 N. Specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), 3-point bending strength after heat treatment at $1200{\sim}1400^{\circ}C$ for 1~10 hr. The best crack-self-healing ability was achieved 770 MPa 3-point bending strength by heat treatment at $1300^{\circ}C$ for 5 hr.
열통합 기법을 통한 이산화탄소 막 분리공정 에너지 해석
김성훈,김태영,김범석,조현준,여영구,Kim, Seong Hun,Kim, Tae Yong,Kim, Beom Seok,Cho, Hyun-Jun,Yeo, Yeong Koo 한국플랜트학회 2016 플랜트 저널 Vol.12 No.2
이산화탄소 분리공정에 있어서 분리막 공정은 소형, 모듈성, 설치의 용이성, 작동의 유연성, 낮은 설치 비용 및 낮은 에너지 소비량 등의 장점들로 인하여 주목 받고 있다. 본 연구에서는 실험데이터와의 비교를 통해 교차흐름, 병류흐름, 향류흐름 3가지 모델의 정확도를 알아보았다. 실험에서 이용된 이산화탄소 분리공정을 가장 잘 나타내어주는 모델을 토대로 전산모사를 통하여 2단 막 분리 구조에서의 운전조건을 규명하고 분리막의 투과도 및 선택도가 분리성능에 미치는 영향을 알아보았다. 나아가 수증기 sweep을 이용하는 2단 막 분리 구조에서 열교환망 합성기법을 적용하여 열교환기 도입에 따른 소요 전력의 변화와 운전비용 절감효과를 살펴보았다. The membrane separation processes have received attention due to advantages such as compactness, modularity, ease of installation, flexibility of operation, lower capital cost and lower energy consumption. In this study, we evaluated accuracy of cross-flow, co-current and counter-current models. With the most accurate model, we identified the operating conditions of the two-stage membrane separation and examined the effects of permeance and selectivity of the membrane by simulation. Futhermore, power requirements and operating cost savings due to the introduction of the heat exchanger were investigated by applying heat exchanger network synthesis technique in the two-stage membrane separation using vapor sweep.
김성훈,김중배,Kim Seong-Hun,Kim Jung-Bae 대한전자공학회 2006 전자공학회지 Vol.33 No.3
URC(Ubiquitous Robotic Companion) 환경에서 소프트웨어 로봇은 인공지능 기술과 네트워크 기술을 활용하여 상황에 따라 사용자에게 맞는 맞춤형 서비스를 제공하는 지능형 에이전트 기술로 정의할 수 있다. 소프트웨어 로봇은 인터넷 상에 존재하는 가상의 로봇이며, 실물 로봇을 제어하기 위해서는 로봇 내부에 로봇의 태스크와 행위, 하드웨어 디바이스를 제어하기 위한 아키텍처가 필요하다. 본 고에서는 소프트웨어 로봇이 실물 로봇을 제어하기 위해서 필요한 로봇 내부의 소프트웨어 아키텍처의 요구사항과 시스템을 소개한다.
에너지 효율성과 서비스 품질 보장을 위한 MAC 프로토콜
김성훈,고선복,정창렬,이성근,Kim, Seong-Hun,Goh, Sun-Bok,Jung, Chang-Ryul,Lee, Sung-Keun 한국전자통신학회 2008 한국전자통신학회 논문지 Vol.3 No.2
USN이 적용되는 분야가 확장되고, 연구가 활발히 이루어짐에 따라, 다수개의 USN이 상호 혼재하는 단계를 거쳐, 하나의 USN을 통해 다수의 응용서비스가 제공되는 단계로 진화될 것으로 전망된다. 따라서 하나의 USN에서 전달하는 데이터 패턴은 드문 데이터 리포팅, 연속적인 정보 모니터링, 이벤트 드리븐 데이터, 쿼리를 기반으로 하는 데이터 등의 여러 패턴이 혼재하게 될 것이다. 이러한 데이터 패턴들은 각 각이 요구하는 지연, 에러 비율, 전송률 등의 QoS 특성이 다르게 된다. 따라서 본 논문에서는 이런 환경에서 적합한 QoS를 보장해 줄 수 있는 MAC 프로토콜을 제안하였다. 제안된 알고리즘은 여러 응용에 맞춰 서비스를 제공하기 때문에 불필요한 에너지의 소비를 줄일 수 있다. The sensor node's performance is expected to be improved and the price will be largely decreased. As USN-applied field is expanded, multiple application services are expected to be provided through one USN soon. Multiple applications be required a periodic data reporting, consecutive information monitoring, event-driven data and query-based data as the data pattern that USN is delivered. Accordingly, the mechanism which can assure QoS according to each data characteristic is required. In this paper, A proposed protocol apply the duty cycle of S-MAC protocol variably and flexible according QoS level. This method largely reduces the delay on the delay-sensitive traffic, while keeping the energy efficiency.
김성훈,박재기,Kim, Seong-Hun,Park, Jae-Gi 한국섬유공학회 1997 한국섬유공학회지 Vol.34 No.3
Wet process with KOH aqueous solutions was performed for the surface treatment of polyimide films. Surface energy and mechanical property of surface treated commercial polyimide films in wet process were investigated. The value of surface energy in wet process was increased rapidly at the beginning of treatment time. However, the tensile strength of the surface modified polyimide films were decreased with increasing treatment time The lap shear strength measurement revealed that the value of lap shear strength was increased in the beginning of treatment time. However the value of lap shear strength was decreased as treatment time goes by. It seems that irregular adhesion on the surface modified polyimide films in the pressing due to the excessive etching on the surface of polyimide films. The phenomena were confirmed by SEM. The factors of improvement of polyimide adhesion were the applied pressure for the bonding process, drying time after surface modification and surface energy as the index of surface polarity (The lap shear strength decrement with increasing treatment time is induced by the irregular adhesion of the excessively etched polyimide surfaces)