http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2차 멀티비트 Sigma-Delta 변조기 설계 및 제작
김선홍,최석우,조성익,김동용 대한전기학회 2004 전기학회논문지 D Vol.53 No.9(D)
This paper presents block and timing diagrams of the DWA(data weighted averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the Matlab modeling, the optimized coefficients of the integrators are obtained to design the modulator. And then the fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed second-order multibit modulator is fabricated in a 0.35㎛ CMOS process. The designed modulator achieves 73dB signal-to-noise ratio and 72dB dynamic range at 1.2Vp-p 585kHz input signal and 52.8MHz sampling frequency.
Data Weighted Averaging을 이용한 3차 멀티비트 Sigma-Delta 변조기
김선홍,조성익,김동용,최석우 대한전자공학회 2004 電子工學會論文誌-SD (Semiconductor and devices) Vol.41 No.09
This paper presents block and timing diagrams of the DWA(Data Weighted Averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the MATLAB modeling, the optimized coefficients of the integrators are obtained to design the modulator. The fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed third-order multibit modulator is fabricated in a 0.35㎛ CMOS process. The modulator achieves 75dB signal-to-noise ratio and 74dB dynamic range at 1.2Vp-p 825kHz input signal and 52.8MHz sampling frequency. 본 논문에서는 DWA(Data Weighted Averaging) 방식의 sigma-delta 변조기에서 피드백 지연시간을 최적화 할 수 있는 DWA 구조의 블록도 및 타이밍도를 제안한다. 변조기 설계를 위하여 MATLAB 모델링으로 적분기의 최적 계수를 설정한 후 변조기의 비이상성을 고려하여 완전 차동 SC 적분기, 피드백 DAC, 9-레벨 양자화기, DWA를 설계하였다. 각 블록을 이용하여 실현된 3차 멀티비트 sigma-delta 변조기는 0.35㎛ CMOS 공정으로 칩으로 제작하였고, 동작 특성은 1.2Vp-p 825kHz의 입력 신호, 샘플링 주파수 52.8MHz에서 75dB의 SNR과 74dB의 DR을 가진다.
Umbrella arch 공법의 보강효과 및 천단침하량 예측에 관한 연구
김선홍,문현구 한국자원공학회 2002 한국자원공학회지 Vol.39 No.3
Recently, Umbrella Arch Method(UAM) is commonly used in tunnel design in order to reinforce the ground around tunnel and stabilize the tunnel face. But quantitative estimation of reinforcement effect is needed because UAM is designed and constructed only on the basis of empirical experience. By using 3-dimensional finite element method, parametric study is performed for elastic modulus of ground and overburden, and reinforcement effect is analyzed quantitatively. From the results, crown settlement decreases about 12%~32% in soil tunnel, about 12%~26% in weathered rock tunnel and 11%~18% in soft rock tunnel when applied with UAM. The prediction equation for final crown settlement is suggested through regression analysis and the equation is expressed as exponential function which has variables such as So and Smax. 지하철, 철도, 도로터널 등에서 터널주변의 지반을 보강하고 막장을 안정시키기 위하여 UAM (Umbrella Arch Method)이 많이 적용되고 있다. 그러나 이 공법은 현장 시공사례를 통한 경험적인 방법에 의 해 설계와 시공이 이루어지고 있어 체계적인 설계·시공방법과 보강효과를 정량적으로 판단할 수 있는 방안 이 요구된다. 본 연구에서는 유한요소법을 이용하여 지반의 탄성계수와 지층두께에 대한 매개변수 연구를 수 행하였으며, UAM의 보강효과를 변위에 대해 정량적으로 분석하였다. 그 결과, UAM 적용시 토사지반의 터 널은 12%~32%, 풍화암지반의 터널은 12%~26% 그리고 연암지반의 터널은 11%~18%의 변위가 감소하였다. 또한, 지반의 탄성계수와 지층두께에 대해 회귀분석을 실시하여 막장면 천단침하량(So)과 수렴후 최대침하량 (Smax)으로 표현되는 지수함수 형태의 천단침하량 예측식을 제안하였다.
김선홍 한국지방세연구원 2015 지방세포럼 Vol.21 No.-
현대사회를 “홍보의 시대”라고 한다. 홍보를 하지 않고서는 경쟁력을 키울 수 없는 시대에 우리는 살고 있다. 요즘 지방에서는 홍보성 이벤트가 1년에 1,000여 회가 넘게 개최되고 있다. 지방정부 입장에서 보면 홍보는 생존을 위한 정책수단이며, ‘정책이 곧 홍보이다’. 이제 기업뿐만 아니라 중앙정부나 지방정부에서도 홍보는 선택이 아니라 필수가 되고 있다. 특히 모든 길이로마로 통하듯이 이제는 모든 정책과 기업전략이 홍보로 통하고 있다. 이런 관점에서 볼 때 지방정부의 홍보방법도 점차 다양화하고 있으며, 디지털 TV를 통하여 공공서비스, 특히 지방세 분야를 각 가정에 송출하여 찾아가는 지방 세무 행정을 실현하고자하는 마음에서 “TV를 보면서 지방세 납부 OK”라는 주제로 이 글을 쓰고자 한다.