http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김선규,김혜빈,류철,Kim, Seonkyu,Kim, Hyebin,Ryu, Chul 한국인터넷방송통신학회 2018 한국인터넷방송통신학회 논문지 Vol.18 No.3
본 논문에서는 햅틱 렌더링을 위한 동영상의 장면을 정의하고 그 중 정지 상태의 객체와 단일 객체가 충돌하는 상황에 대한 햅틱 렌더링 알고리즘을 제안한다. 객체의 움직임을 크게 네 가지 상황으로 분류하였으며 동영상에서 쉽게 볼 수 있는 장면들을 활용하였다. 제안하는 알고리즘은 움직임 예측과 객체 추적을 활용하여 객체의 방향 변화와 모양 변화를 검출함으로써 햅틱 렌더링을 하기에 적합한 프레임인지 판별할 수 있도록 하였다. 알고리즘 실행을 통해 샘플 동영상에서 총 13개의 프레임을 추출하였으며 해당 프레임이 재생되는 시간을 계산하였다. 햅틱 편집 프로그램을 통해 상황에 알맞은 햅틱 생성 파형을 추가함으로써 계산된 재생 시간에 햅틱 효과가 나타나는 것을 확인하였다. In this paper, we define a haptic rendering algorithm for a situation that has collision between static object and single object. We classified video scenes into four categories which can be easily seen in video sequence. The proposed algorithm can detect which frame is suitable for haptic rendering by detecting the change of direction using motion estimation and change of shape using object tracking. As a result, a total of 13 frames are extracted from the sample video and playing time of these frames were calculated. We confirmed that the haptic effect appears in expected playing time by adding the appropriate haptic generating waveform thtough the haptic editing program.
김선규,Kim Seon-Gyoo 한국건설관리학회 2002 건설관리 : 한국건설관리학회 학회지 Vol.3 No.1
최근 들어 국내 대형건설회사들을 중심으로 위험관리체계에 대한 관심이 급증하고 있으며, 각 회사들은 위험관리체계를 건설공사에 적용하기 위하여 많은 노력을 기울이고 있다. 그러나 기존의 외국 공공기관에서 적용되었던 위험관리 방법론들은 위험관리 프로세스가 일회성으로 완료되고, 프로젝트 관리자의 개인적 판단에 크게 의존하는 측면이 강하여, 이를 국내 건설공사에 적용할 경우 많은 문제점이 있는 것으로 분석되었다. 본 연구의 목적은 건설환경에 더욱 적합하고, 실용적인 위험관리 방법론으로 잔여위험을 고려한 위험대응 프로세스 모델을 제안하는 것이다. 이러한 프로세스는 특정 위험요인에 대한 위험대응 전략 수립시 전략의 효율성을 감안하여 잔여위험도를 계산한 다음 잔여위험도가 위험허용도 이하가 될 때까지 반복적으로 위험대응 전략을 수립하는 프로세스이다. Recently, a few major construction companies in Korea have a growing interests to the risk management system, and they are trying to apply it to their construction projects. However, the existing methodologies to be applied to the foreign public projects are not proper to the construction environments due to its adaptabilities, that has one time process and heavily depends on personal judgement. The purpose of this paper is to propose a risk response process in consideration of the residual risks, which would be more adaptable and practical in the construction environment, overcoming the current obstacles to be mentioned above. This process has systematic repeat process until the residual risks go down to the risk thresholds based on the efficiency of specific response strategy.
김선규,신미경,어규식,이진용,홍정표,전양현,Kim, Sun-Q,Shin, Mi-Kyoung,Auh, Q-Schick,Lee, Jin-Yong,Hong, Jung-Pyo,Chun, Yang-Hyun 대한안면통증구강내과학회 2007 Journal of Oral Medicine and Pain Vol.32 No.2
Trees emit phytoncide into atmosphere to protect them from predation. Phytoncide from different trees has its own unique fragrance that is referred to as forest bath. Phytoncide, which is essential oil of trees, has microbicidal, insecticidal, acaricidal, and deodorizing effect. The present study was performed to examine the effect of phytoncide on Porphyromonas gingivalis, which is one of the most important causative agents of periodontitis and halitosis. P. gingivalis 2561 was incubated with or without phytoncide extracted from Hinoki (Chamaecyparis obtusa Sieb. et Zucc.; Japanese cypress) and then changes were observed in its cell viability, antibiotic sensitivity, morphology, and biochemical/molecular biological pattern. The results were as follows: 1. The phytoncide appeared to have a strong antibacterial effect on P. gingivalis. MIC of phytoncide for the bacterium was determined to be 0.008%. The antibacterial effect was attributed to bactericidal activity against P. gingivalis. It almost completely suppressed the bacterial cell viability (>99.9%) at the concentration of 0.01%, which is the MBC for the bacterium. 2. The phytoncide failed to enhance the bacterial susceptibility to ampicillin, cefotaxime, penicillin, and tetracycline but did increase the susceptibility to amoxicillin. 3. Numbers of electron dense granules, ghost cell, and vesicles increased with increasing concentration of the phytoncide, 4. RT-PCR analysis revealed that expression of superoxide dismutase was increased in the bacterium incubated with the phytoncide. 5. No distinct difference in protein profile between the bacterium incubated with or without the phytoncide was observed as determined by SDS-PAGE and immunoblot. Overall results suggest that the phytoncide is a strong antibacterial agent that has a bactericidal action against P. gingivalis. The phytoncide does not seem to affect much the profile of the major outer membrane proteins but interferes with antioxidant activity of the bacterium. Along with this, yet unknown mechanism may cause changes in cell morphology and eventually cell death.
확률적 연결관계 평가기법(PLET)에 의한 사업공기 추정
김선규,Kim, Seon-Gyoo 한국건설관리학회 2014 한국건설관리학회 논문집 Vol.15 No.6
Generally, the most difficult works at scheduling are to estimate the duration of activities and linkages between them because the possibility that the duration and linkages could be exposed to the uncertainties is so high. When estimating a project duration, therefore, the probabilistic estimation of the duration as well as the probabilistic estimation of the linkages between activities should be considered concurrently. The PERT that is one of the most popular techniques applied for the probabilistic estimation of a project duration can not consider the uncertainties of the linkages because it only estimates the probabilistic duration limited to 'FS0' relationship. The purpose of this study is to propose the new method "PLET" for stochastically estimating the project duration based on the probabilistic estimation of the BDM's relationships, and also provide more wide and various probabilsitic information about the project duration by it. 일반적으로 공정계획을 수립할 때 가장 어려운 업무가 작업별 공기와 작업간 연결관계를 추정하는 것이다. 왜냐하면 사업에 잠재된 위험요인들로 인해 작업공기와 작업간 연결관계가 불확실성에 노출될 가능성이 높기 때문이다. 따라서 사업공기를 확률적으로 추정할 경우 작업공기에 대한 확률적인 추정뿐만 아니라 작업간 연결관계에 대한 확률적인 추정도 반드시 고려해야 한다. 확률적으로 사업공기를 추정하는 대표적인 방법인 PERT기법은 작업간 연결관계를 'FS0'로 확정하고 작업공기만을 확률적으로 추정하므로 작업관계의 불확실성을 고려할 수 없었다. 본 연구에서는 BDM기법의 연결관계를 확률적으로 추정함으로써 전체 사업공기를 확률적으로 추정하는 새로운 방법인 PLET기법을 제안하고, 이를 통해 사업공기에 대한 보다 폭넓고 다양한 확률적인 정보를 제공하는데 목적이 있다.
김선규,Kim, Seon-Gyoo 한국건설관리학회 2007 건설관리 : 한국건설관리학회 학회지 Vol.8 No.4
국내 건설산업이 우리나라 경제성장을 견인해 오면서 매출규모와 건설기술측면에서 비약적인 발전을 거듭하여 왔으나, 건설공사를 실제적으로 수행하는 건설회사들은 건설업에 내재된 위험요인들에 대해 큰 관심을 기울이지 않아 왔다. IMF위기와 WTO가입을 계기로 건설업에 내재된 불확실성과 위험요인으로 초래되는 경영악화와 사업의 불안정성을 심각하게 경험하면서, 건설위험을 체계적으로 관리하기 위한 시도가 계속되고 있으며, 해외건설공사의 경우 수주영업단계에 적용할 수 있는 위험관리모델이 개발되어 실무에 적극적으로 활용되고 있는 실정이다. 그러나 국내 건설공사의 시공단계에서 위험관리를 체계적으로 수행할 수 있는 절차와 시스템 개발은 이루어지지 않고 있어, 본 연구는 건설현장의 실무자가 쉽게 이해하고 활용할 수 있는 건설현장 실무자들을 위한 건설공사 위험관리시스템 모델을 제안하고자 한다. Although the construction industry has been rapidly increased at its size and technologies as a locomotive of the economy development in Korea, most construction companies have not paid their attention on the construction risks seriously. However, they have been experienced a lot of business deterioration and project instability during the IMF crisis and WTO entry, and trying to figure out a way to manage the construction intrinsic risks systematically. Some top ranked construction companies have already developed and been implementing a risk management system for the oversea construction projects applying for the marketing and bidding stage, but not for the domestic construction projects during construction phase yet. This paper proposes a construction risk management system model for the site personnel to understand and manipulate very easily in the construction project.
김선규,노성범,이용현,유영정,김진봉,구재오,Kim, Seon-Gyoo,Noh, Seong-Beom,Lee, Yong-Hyun,Yu, Young-Jeong,Kim, Jin-Bong,Koo, Jae-Oh 한국건설관리학회 2012 한국건설관리학회 논문집 Vol.13 No.2
오늘날 대부분의 건설 사업들은 점차 프로젝트의 규모가 고층화, 대형화, 복잡화되어 가고 있다. 이에 국내 건설기업들은 전체적인 공사 흐름을 파악하고 공정의 연결 관계를 고려하는 등 체계적이고 효율적인 공정관리를 위해 여러 가지 관리기법 및 도구들을 개발하여 실무에 도입하고 있다. 그러나 기존의 공정관리 소프트웨어들은 대부분 ADM, PDM기법을 기반으로 하고 있기 때문에 실무 적용 시 많은 문제점들을 발생시키고 있다. 그 중 PDM기법은 선 후행 작업의 착수시점과 완료시점 간의 조합만으로 작업 간의 중복관계를 우회적으로 표현하기 때문에 매우 비효율적이다. 이러한 기존 CPM기법의 단점을 보완하기 위해 직접적으로 작업 간 양방향 다중 중복관계를 표현할 수 있는 새로운 CPM 공정관리기법인 BDM(Beeline Diagramming Method)기법이 제안되었다. 그러나 양방향 다중 중복관계를 표현하고 일정계산을 하게 되면 루프(Loop)현상이 발생하게 된다. 본 연구에서는 BDM기법의 일정계산 방법에 대해 연구하여 양방향 다중 중복관계에서 루프가 발생했을 때 일정계산을 원활하게 할 수 있는 방법에 대해 제안 및 검증을 하고자 한다. Today, most construction projects have been higher, bigger, and more complicated gradually. So the domestic construction companies have been trying to understand overall construction process and relationships between activities, and adopted various management techniques and tools in order to perform a systematic and effective scheduling. However numerous problems have been occurred on the practical applications because most existing scheduling softwares adapt ADM and PDM techniques. One of them, PDM, is so uneffective because it represents the overlapping relationships between two consecutive activities only by the combinations of start and finish points between two activities. In order to supplement the demerit of PDM, Beeline Diagramming Method(BDM) is proposed as a new networking technique, it can represent two-way multiple overlapping relationships between two activities directly. However there are occurring a loop phenomenon on applying two-way multiple overlapping relationships. This research proposes and verifies the schedule computation method of two-way multiple overlapping relationships on the BDM network.
김선규,허성환,조성오,Kim, Seon-Kyu,Heo, Sung-Hwan,Cho, Sung-Oh 한국진공학회 2005 Applied Science and Convergence Technology Vol.14 No.4
고휘도 마이크로빔 X-선원에 사용할 고휘도 전자빔원을 탄소나노튜브를 이용하여 설계, 제작하였다. 전자빔원은 탄소나노튜브 팁을 이용한 음극, 전자빔 인출용 그리드, 전자빔 가속용 양극으로 이루어진 삼극관 형태의 구조를 가진다. 설계된 휘도 값을 얻기 위하여 X-선 발생부에서의 전자빔 직경이 5 $\mu$m 이하, 빔전류가 약 30 $\mu$A 이상이 요구된다 이러한 요구조건을 만족시키기 위하여, EGUN Code를 이용하여 전자빔의 궤적 및 공간분포 등을 계산함으로써, 탄소나노튜브 팁 및 전자빔원의 구조 등을 최적화 하였다. 제작된 탄소나노튜브 팁은 직경 200 $\mu$m 의 텅스텐 와이어를 전기화학적으로 에칭하여 그 끝을 뽀족하게 만든 뒤 텅스텐의 끝 부분에 탄소나 노튜브를 화학기상법으로 증착하여 제작하였다. 제작된 탄소나노튜브를 이용하여 전자빔 인출실험을 수행하였다. 개발 중인 탄소나노튜브 팁을 이용한 고휘도 전자빔원의 설계 특성 및 기초 실험결과를 보고한다. A high-brightness electron beam source for a microfocus X-ray tube has been fabricated using a carbon-nanotube (CNT) field emitter. The electron source consists of cathode that includes a CNT field emitter, a beam-extracting grid, and an anode that accelerates that electron beam. The microfocus X-ray tube requires an electron beam with the diameter of less than 5 $\mu$m and beam current of higher than 30 $\mu$A at the position of the X-ray target. To satisfy the requirements, the geometries of the field emitter tips and the electrodes of the gun was optimized by calculating the electron trajectories and beam spatial profile with EGUN code. The CNT tips were fabricated with successive steps: a tungsten wire with the diameter of 200 $\mu$m was chemically etched and was subsequently coated with CNTs by chemical vapor deposition. The experiments of electron emission at the fabricated CNT tips were performed. The design characteristics and basic experimental results of the electron source are reported.
CPM 공정계획의 PDM 중복관계를 BDM 중복관계로 전환시키는 방법
김선규,유재우,고대규,Kim, Seon-Gyoo,Yoo, Jae-Woo,Ko, Dae-Gyu 한국건설관리학회 2012 한국건설관리학회 논문집 Vol.13 No.5
현재 건설사업 실무에 활용되는 대부분의 공정관리 소프트웨어들은 PDM(Precedence Diagramming Method) 기법을 적용하고 있는데 이는 작업 간 중복표시가 가능하기 때문이다. 그러나 기존 PDM방식의 작업 간 중복관계는 선 후행 작업간 착수 및 종료시점을 연결하는 네 가지 조합으로 표시되는데, 실제 건설 사업에서 선 후행 작업 간 중복관계는 작업의 중간시점 어디에서라도 상호 연관관계를 가질 수 있지만 PDM기법은 이를 효율적으로 표현하지 못한다. 따라서 본 연구에서는 작업 간 중복관계를 표시할 때, 작업의 착수와 종료시점에만 국한되지 않고, 작업의 중간 어느 시점에서도 작업 간 상호관계를 연계시킬 수 있을 뿐만 아니라 복수의 중복관계도 표시 할 수 있는 새로운 공정관리 기법인 BDM(Beeline Diagramming Method)기법으로 기존 PDM기법의 네 가지 표현방법을 전환시키는 방법을 제안한다. 이를 통해 기존의 PDM기법으로 작성된 CPM공정계획이 BDM기법의 CPM(Critical Path Method) 공정계획으로 전환이 가능하게 되며, BDM기법의 장점을 활용하여 공정관리의 효율성을 향상시키며 궁극적으로 공정관리의 발전에 기여하고자 한다. The reason why most scheduling softwares currently using at construction projects adopt PDM (Precedence Diagramming Method) is that it can express an overlapping relationship between activities. However, the overlapping relationships in PDM are represented only by combinations of four overlapping types that connect the start and finish points of two activities, therefore, PDM cannot express efficiently the relationships between any middle points of two activities if they should be represented. This research proposes the method of transforming the four overlapping types of PDM to the overlapping relationships of BDM(Beeline Diagramming Method), new networking technique, that can connect the inter-relationships at any middle points of two activities as well as express multiple overlapping relationships. The proposed method will help not only to improve an efficiency of scheduling but also to upgrade the scheduling technique because BDM technique has a lot of unique advantages in scheduling.
김선규,Kim, Seon-Gyoo 한국건설관리학회 2007 건설관리 : 한국건설관리학회 학회지 Vol.8 No.5
Recently, the government is very active to secure the financial resources by inducement of the private investment in fulfilling an extension of the SOC facilities. One of the reasons that the private investors hesitate to put money into the private finance projects, however, is the lack of knowledges about various risks to be possibly incurred during the project execution. This research was performed as one of the preparation works in order for a A engineering company to act as a prime contractor of the project management service in the private finance project, and finally developed the risk factor dictionary as a new concept to satisfy the requirement of a A company and overcome a limit of the existing risk checklists. Although the risk factor dictionary looks like the only simplified table to be the risk factors identified in three dimensions, the impacts and response strategies expressed in narrative and multi-items, and the responsible parties indicated, it has great meanings to get a lot of direct and indirect accomplishments over the simplified table during the development process. 최근 정부는 사회간접자본 시설확충사업을 시행함에 있어 민간투자 유치를 통한 재원확보에 매우 적극적이다. 그러나 민간투자자들이 민자사업에 적극적이지 못하게 하는 원인 중 하나는 사업의 추진과정에서 발생 가능한 다양한 위험에 대한 지식이 부족하다는 점이다. 본 연구는 국내 엔지니어링 전문회사인 A사가 민자사업 사업관리 주 계약자로 활동하기 위한 준비업무로서 잠재적 투자자에게 제출할 위험관리계획서의 일부로 수행되었으며, 기존 위험요인 체크리스트의 한계를 극복하고 A사의 요구사항들을 만족시키는 새로운 개념의 민자사업 위험요인사전을 개발하였다. 민자사업 위험요인사전은 위험요인을 3차원적으로 분류하고, 영향도와 대응전략을 서술식 및 복수항목으로 표현하며, 대응주체를 명시한 단순화된 일람표임에도 불구하고, 이를 개발하는 과정에서 단순화된 일람표를 뛰어넘는 많은 직 간접적 성과를 이루었다는 것에 큰 의미가 있다고 하겠다.