http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 권대혁 (검색결과 127 건)
- 무료
- 기관 내 무료
- 유료
-
-
Ta₂O_(5) 게이트 pH-ISFET의 제조 및 그 동작특성
권대혁,김명규,이광만,손병기 경북대학교 센서기술연구소 1991 센서技術學術大會論文集 Vol.2 No.1
To improve sensing characteristics of the pH-ISFET using LPCVD-grown Si_(3)N_(4), Ta_(2)O_(5) thin film depositied by RF reactive sputtering was used for hydrogen ion sensing gate and investigated sensing characteristics at various annealing temperatures. The XRD pattern showed that the crystal structure of the Ta20s thin film was amorphous when the annealing temperature was less than 500℃, δ-Ta_(2)O_(5) poly-crystal at MC Ta_(2)O_(5) gate pH-ISFET annealed at 400℃, O_(2) ambient for 1hour, the AES and RBS spectrum showed good stoichiometry (O/Ta=2.5). And its sensing characteristics showed good linearity and high sensitivity(57~59MV/pH) in the wide pH range(pH 2~12), and excellent long-term stability (0.03~0.05 pH/day). It can be concluded from these results that the sensing characteristics of Ta_(2)O_(5) gate pH-ISFET is more excellent than Si_(3)N_(4) gate pH-ISFET.
-
p-n접합을 이용한 ISFET의 encapsulation
權大赫 慶一大學校 1992 論文集 Vol.8 No.1
The p-n junction isolation method for the electrical isolation of ISFET chip from the liquid environments has been presented instead of the conventional encapsulant castings carried out by the manual labors which requires much time and experiences. This junction-isolated ISFET showed similar operational characteristics compared with those of the encapsulant-coated ISFET.
-
권대혁 경북대학교 센서기술연구소 1996 연차보고서 Vol.1996 No.-
KOH 수용액을 이용하여 실리콘 식각공정기술을 확립하였으며, 이를 이용하여 실리콘 기판 위에 스트레스 균형이 이루어진 600 ㎚ 두께의 Si_3N_4/SiO_2/Si_3N_4 다이아프램을 제조하였다. 이때의 실리콘의 식각률은 약 1.45 ㎛/min정도였다. NON 박막과Au/NiCr/NON 박막에 대한 광투과도, 광흡수도 및 광반사율을 측정한 결과 광흡수는 두 박막에 대해 수%였다. NON 다이아프램 뒷면에 약 100 ㎚의 금을 진공증착하여 제조된 Au/NiCr/NON 박막의 광특성을 조사한 결과, 박막의 광투과도를 수%정도로 감소시킬 수 있어서 센서의 광반사막으로 사용할 수 있었다. NON 다이아프램을 이용하여 제조한 수위측정용 압력센서는 3×3 ㎟, 4×4 ㎟, 5×5 ㎟ 의 정사각형 다이아프램 크기에서 약 3.886 ㎻/㎪, 4.857 ㎻/㎪ 및 5.829 ㎻/㎪의 압력감도를 나타내었으며, 광출력은 인가압력이 증가함에 따라 감소하였다. 광손실을 줄이기 위해 광송수신용 광섬유를 코아 직경이 62.5 ㎛인 멀터모드 광섬유를 사용하였고 다이아프램의 크기를 3×3 ㎟, 4×4 ㎟ 및 5×5 ㎟ 등으로 각각 변화시켜 광강도형 멀터모드 광섬유 압력센서를 제조하고 그 압력특성을 조사하였다. 측정된 광섬유 압력센서의 감도는 각각 약 20.689 ㎻/㎪, 26.694 ㎻/㎪ 및 39.331 ㎻/㎪였다. 광섬유 단면위에 RF 마그네트론 스퍼터링법으로 TiO_2를 증착하였다. TiO_2 박막의 굴절률 및 두께는 각각 약 2.43과 800 Å였다. 광섬유 Fabry-Peort 간섭계를 실리콘 다이아프램과 NON 다이아프램과 결합하여 광간섭형 압력센서를 제조하였다. 5×5 ㎟ 크기의 실리콘 다이아프램의 경우, 그 감도는 두께를 각각 15 ㎛와 50 ㎛로 변화시켰을 때 0.497 radian/㎪ 및 0.392 radian/㎪였다. 또한, 600 ㎚-NON 다이아프램의 경우에는 다이아프램의 크기fmf 2×2 ㎟, 5×5 ㎟ 및 8×8 ㎟로 변화하였을 때 약 0.119radian/㎪, 1.003 radian/㎪ 및 1.571 radian/㎪의 압력감도를 나타내었다. Using KOH solution, silicon etching technology has been established and stress-balanced flat 600 ㎚ thick triple dielectric membrane(150 ㎚-Si_3N_4/300 ㎚ -SiO_2/150 ㎚-Si_3N_4) on silicon substrate has been fabricated. At this time, etching rate of silicon was around 1.45 ㎛/min. At the wavelength of the sensor light source near 1.3 ㎛, optical loss of the NON diaphragm was decreased to a few percents by depositing 100 ㎚-Au layer on it, which is sufficient to be used as a light reflection layer of the sensor. From the optical output power-pressure characteristics of the fabricated intensity-type pressure sensors, the sensitivities of the pressure sensor for measuring water level were about 3.886, 4.857, and 5.829 ㎻/㎪ for the diaphragm sizes of 3×3 ㎟, 4×4 ㎟ and 5×5 ㎟, indicating that the output power linearly decreased with increasing applied pressure. We have used 62.5/126 ㎛ multi-mode fiber for the light transmission to minimize optical loss, and the pressure characteristics were examined for the diaphragm sizes of 3×3 ㎟, 4×4 ㎟, 5×5 ㎟. The respective sensitivities were, about 20.689 ㎻/㎪, 26.694 ㎻/㎪, and 39.331 ㎻/㎪. TiO_2 mirror at the cross section of fiber optic was deposited by using RF magnetron sputter. The refractive index and thickness of the TiO_2 thin film was about 2.43 and 800 Å. An interferometric fiber optic sensor has been manufactured using a fiber optic Fabry-Perot interferferometer and a silicon diaphragm or a NON diaphragm. For the silicon diaphragm sizes of 5×5 ㎟, the sensitivities of the sensor silicon diaphragm thickness of 15 ㎛ and 50 ㎛ were 0.497 radian/㎪ and 0.392 radian/㎪, respectively. And for the silicon diaphragm sizes of 2×2 ㎟, 5×5 ㎟, 8×8 ㎟, the sensitivities were 0.110 radian/㎪, 1.003 radian/㎪, and 1.571 radian/㎪, respectively.
-
-
-
-
-
-
영상전화를 이용한 응급의료 전화상담원의 심정지 인지에 관한 시뮬레이션 연구
권대혁,조영석,이진혁,조규종,이창희 대한응급의학회 2020 대한응급의학회지 Vol.31 No.4
Objective: Bystander cardiopulmonary resuscitation is important for the survival of cardiac arrest patients. The rapid recognition of cardiac arrest by dispatchers leads to quicker initiation of bystander cardiopulmonary resuscitation. This study examines the use of video phone by dispatchers in recognizing cardiac arrest. Methods: Between June to October 2018, 227 participants were recruited (114 lay people and 113 dispatchers) for this study. Lay people participants answered prepared questionnaires after watching 6 scenario video clips of a collapsed virtual patient with unresponsiveness. Dispatchers were divided into two groups: audio call group and video call group. The audio call group judged for occurrence of a cardiac arrest in the 6 scenarios, referring only to questionnaires of the lay people. The video call group judged the same scenarios referring to questionnaires and scenario video clips. The score of correct answers of each scenario was subsequently analyzed. Results: Significant difference was obtained for the total score among the audio call group and the video call group (3.67 ±1.3 vs. 4.66±1.11, respectively; P<0.001). In 2 scenarios concerning cardiac arrest with gasping, the correct answer rate was higher in the video call group (63.9% vs. 85.2%, P<0.001; 59.5% vs. 74.8%, P=0.014). In 2 other scenarios showing non-cardiac arrest with normal breathing, the correct answer rate was also higher in the video call group (52.7% vs. 71.4, P=0.010; 38.2% vs. 63.6%, P<0.001). Conclusion: This study determined that compared to the audio call group, dispatchers of the video call group were more accurate in recognizing cardiac arrest. This indicates that video phones are more helpful in determining gasping and in discerning cardiac arrest with syncope or seizure.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
