http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
곽기석,강인식,정연태,강주복,Kwak, Ki Seok,Kang, In Shik,Jeong, Yeon Tae,Kang, Ju Bok 대한토목학회 1994 대한토목학회논문집 Vol.14 No.4
It is difficult to make an exact estimate of the peak discharge or the runoff depth of flood and establish the proper measure for the flood protection since the water stage or discharge has been nearly measured at most medium or small river basins. The objective of this study is to estimate parameters of the discrete, linear, input-output model for medium or small river basin. The On-Cheon River basin in Pusan was selected for the study area. The runoff data used in the study has been observed since June 1993, and the effective rainfall was determined using the storage function method. The parameter sets of the discrete, linear, input-output model were estimated using the least squares method and the correlation function method, respectively. The calculated hydrographs by the discrete, linear, input-output model regenerated the observed outflow hydrographs well, and also the simulated flood hydrograph was comparable to the observed one. Therefore, it is believed that the discrete, linear, input-output model is simpler than other runoff analysis methods, and can be applied to a medium or small river basin. 대부분의 중소규모 하천 유역에서는 수위 또는 유량 등의 실측자료가 빈약한 상태이기 때문에 홍수시의 유출량을 정확히 추정하고, 홍수피해를 경감시키기 위한 적절한 대책을 세우기가 매우 어려운 실정이다. 본 연구에서는 부산지방에 위치한 온천천 유역을 대상으로 하여 중소 하천 유역에 대한 선형 이산화 입력-출력 모형의 매개변수를 추정하고자 하였으며, 1993년 6월부터 실측한 유출량 자료와 저류함수법에 의해 산정한 유효강우량을 사용하여 선형 이산화 입력-출력 모형의 매개변수를 최소자승법과 상관함수법에 의해 추정하였다. 선형 이산화 입력-출력 모형에 의한 유출 수문곡선은 실측 수문곡선을 잘 재현한 것으로 나타났다. 또한 추정된 매개변수와 강우자료만을 사용하여 모의발생시킨 수문곡선 역시 실측 수문곡선과 잘 일치함을 알 수 있었다.
곽기석,조남원,윤태성,박진배 대한전기학회 2006 전기학회논문지 D Vol.55 No.5(D)
- In this paper an optical power meter using Hadamard transform, which can be used in multiple channel optical elements alignment system, is proposed. A traditional optical power meter in multiple channel optical elements alignment system is able to judge how well the elements are aligned each other by measuring optical power of the first and the last two channels with at least two detectors. It has critical drawback that the alignment accuracy per channel is dependent on the number of detectors. The proposed optical power meter can get noise reduction by the Hadamard transform based multiplexing technique. The Hadamard transform based multiplexing technique using spatial light modulators is distinguished by the best enhancement of signal-to-noise ratio (SNR) for the reconstructed signals. Moreover, the noise reduction increases with increasing the order of multiplexing, namely the number of optical element channels. The proposed system is implemented by PDLC (Polymer Dispersed Liquid Crystal) mask which is operated by electric filed and generates optimal multiplexing patterns based on the Hadamard transform and single detector. It means that we obtain not only the each channel's optical power of multiple channel elements at once but also the best enhancement of SNR with single detector. Experimental results show that the proposed optical power meter is suitable for an active optical alignment system for multiple channel optical elements.
원주가압형 극저온 버터플라이 밸브의 가압 길이에 따른 유동-구조 연성해석
곽기석(Ki-Suk Kwak),한동섭(Dong-Seop Han),한근조(Geun-jo Han) 한국항해항만학회 2010 한국항해항만학회 학술대회논문집 Vol.2010 No.춘계
최근 석유수급에 대한 불안함이 증가되고 있으며 그로 인해 천연가스의 개발과 사용범위가 확대되고 있다. 특히, 전 세계적으로 조선에서는 LNG 및 LPG와 같은 천연가스의 저장과 운반에 대한 발전이 급속도로 성장하고 있는 반면에, 국내에서는 극저온 부품 소재의 기술력 저하로 극저온 버터플라이 밸브와 같은 핵심부품을 전량 수입에 의존하고 있는 실정이다. LNG 및 LPG 등은 미래 핵심 천연연료로 많은 지지를 얻고 있고 사용빈도도 증가하고 있기 때문에 이와 관련된 기술이 발전되어야 함은 물론이고, 국내에서도 극저온 버터플라이 밸브 제작과 설계에 대한 핵심기술을 확보하여야 한다. 이러한 관점에서 본 논문에서는 극저온 환경 하에서 우수한 신뢰성과 안전성이 보장될 수 있는 원주가압형 극저온 버터플라이 밸브를 유동-구조 연성해석을 이용하여 밸브 가압 길이에 따른 강도 평가를 수행하였다. Recently, development and using a range of natural gas is widening because anxiety of oil supply is increasing. Especially, around the world, development for Storage and transportation of natural gas is rapidly growing. On the other hand, in Korea because of technology loss for cryogenic part material, key component is rely on import. LNG and LPG are the future core of natural fuels. That are getting a lot of support and it have increased the frequency of use. So it should be associated with the development of technology. And key technology about design and manufacturing for cryogenic butterfly valve are secured. In this paper, we analyze the strength evaluation for circumference pressurization type cryogenic butterfly valve using the fluid-structure analysis.