http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 고형림 (검색결과 42 건)
- 무료
- 기관 내 무료
- 유료
-
프로판 펄스 주입에 의한 백금주석촉매의 탈수소반응 특성 연구
고형림,정재원,최이선 한국화학공학회 2019 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.57 No.4
The results of the catalytic reaction by pulsed injection of reactants are useful for studying the initial reaction characteristics in the case of many coke invloved reactions. The dehydrogenation characteristics of alumina supported platinum tin catalysts were investigated by pulsed injection of propane. The yield of propylene was maximized when the reduction time of propane injection catalyst was 550 o C. Raman analysis showed that the amount of coke was very small when PtSn (4.5) catalyst was used and the short contact time was simulated by propane pulse injection. n order to differentiate the degree of dispersion of platinum, PtSn (4.5) catalyst was sintered at 900 o C with hydrogen, and then the temperature of air - redispersion was varied and propane pulse was injected. As a result, conversione and yield were the highest when air-redispersion temperature is 600 o C. The lower the air-redispersion temperature, the higher the selectivity. As the tin content in the platinum catalyst increased, the propane conversion was lowered, but the selectivity to propylene increased and the yield increased. From this, it can be seen that the tin-added platinum catalyst is less active than the platinum catalyst from the beginning of the reaction, which is less affected by coke. The dehydrogenation reaction by the propane pulse injection shows a higher conversion rate than the result of continuous injection due to the formation of COx, and the amount of coke is very small. Decrease in selectivity due to the formation of COx can be reduced by increasing the reduction temperature and time. 반응물의 펄스주입에 의한 촉매반응결과는 코크가 많은 반응의 경우 초기반응특성을 연구하는데 유용하다. 프로판의펄스주입으로 알루미나에담지된백금주석촉매의 탈수소반응특성을연구하였다. 프로판주입전촉매의환원을 550 o C 에서 한 경우, 환원시간이 1시간인 경우 프로필렌의 수율이 최대가 되었다. PtSn (4.5)촉매를 사용하고, 프로판 펄스 주입에 의해 짧은 접촉시간을 모사한 경우 코크의 양이 매우 적었음을 Raman분석으로 알 수 있었다. 백금의 분산도를다르게 하기위하여 PtSn (4.5)촉매를 수소로 900 o C에서 신터링 후 공기-재분산시의 온도를 다르게 처리한 후, 프로판펄스 주입한 결과 공기처리 온도가 600 o C 일 때 프로판의 전환율과 수율은 가장 높았다. 공기-재분산의 온도가 낮을수록 선택도는 높았다. 백금촉매에 주석함량이 증가함에 따라 프로판 전환율은 낮아졌지만, 프로필렌으로의 선택도는높아져서, 수율은 증가하였다. 이로부터 주석을 첨가한 백금촉매는 코크의 영향이 적은 반응초기부터 백금촉매보다 활성이 낮다는 것을 알 수 있다. 프로판 펄스주입에 의한 탈수소반응은 COx의 생성에 의해 연속주입에 의한 결과보다높은 전환율을 보이고, 코크의 양이 매우 적은 특징을 보이고 있다. COx의 생성에 의한 선택도 하락은 환원온도와 시간을 증가시키면 줄일 수 있다
-
-
Characterization of MoO3–V2O5/Al2O3 catalysts for selective catalytic reduction of NO by NH3
고형림,박해경 한국공업화학회 2013 Journal of Industrial and Engineering Chemistry Vol.19 No.1
MoO3–V2O5/Al2O3 catalysts were characterized by B.E.T., XRD, LRS, XPS and TPR and the effect of MoO3addition to alumina supported vanadia catalysts on the catalytic activity for the selective catalytic reduction of NO by ammonia was investigated. Upon the addition of MoO3, catalytic activity was enhanced and the particle size of V2O5 which is shown by the results of B.E.T., XRD and Raman spectroscopy decreased. This was one reason for increased catalytic activity. The results obtained by XPS and TPR showed that MoO3 addition to alumina supported vanadia catalysts increased the reducibility of vanadia and this was the another reason for synergy effect between MoO3 and V2O5 in MoO3–V2O5/Al2O3 catalysts.
-
메탄올 수증기 개질반응을 위한 CuO/ZnO/TiO<sub>2</sub>계 촉매의 활성 및 특성에 관한 연구
고형림,김태원,이진구,김경림,Koh, Hyoung-Lim,Kim, Tae-Won,Lee, Jihn-Koo,Kim, Kyung-Lim 한국공업화학회 1998 공업화학 Vol.9 No.7
Cu와 Zn의 몰비가 1/2, 1/1, 2/1인 촉매를 제조하여 메탄올 수증기 개질반응의 활성을 측정하고, 가장 좋은 활성을 보이는 Cu/Zn의 몰비가 2/1인 촉매를 선정하여 $TiO_2$의 첨가량을 달리하여, 메탄올 수증기 개질반응에 대한 활성을 측정하였다. 반응의 압력은 상압, 온도는 $250^{\circ}C$, 수증기/메탄올 몰비 1.5, 접촉시간 0.1 g-cat.hr/mL-feed의 조건에서 활성을 비교한 결과, $TiO_2$의 첨가량이 3 mol%인 촉매의 경우 최대 전화율을 보였고, 전범위에서 수소로의 선택도는 매우 높았다. 촉매의 특성 분석결과 촉매의 비표면적보다는 $N_2O$흡착, 분해방법에 의한 금속구리의 비표면적의 영향이 더욱 큼을 알 수 있었고, 적정 $TiO_2$의 첨가로 금속구리의 비표면적을 높일 수 있었다. XRD, XPS분석결과 반응중에 아연의 산화상태는 달라지지 않으나, 구리는 대부분이 0가와 1가의 상태로 존재함을 확인하였다. Cu-Zn and Cu-Zn-Ti catalysts for the steam reforming of methanol were prepared. This reaction was carried out at atmospheric pressure, $250^{\circ}C$, steam/methanol molar ratio 1.5, and contact time 0.1 g-cat.hr/mL-feed. In case of the catalyst with 3 mol% of $TiO_2$, the activity was superior to that of catalysts without $TiO_2$. The reaction products were mainly hydrogen and carbon dioxide. It was found that catalytic activity was not related to specific surface area but affected by metallic copper area which was measured by $N_2O$ decomposition and increased with the addition of $TiO_2$ content. XPS and XRD showed that the oxidation state of zinc was not changed during reaction, but oxidation states of copper existed in Cu(0) or Cu(I).
-
-
고형림,최이선,김태희 한국화학공학회 2022 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.60 No.3
Redispersion of Pt-Sn particles in Pt, PtSn catalyst which have been sintered by high temperature hydrogen reduction was investigated using oxygen treatment with various temperatures. The aim of this study was to understand the relationship between the catalytic activity for propane dehydrogenation reaction and the change in the physicochemical properties of the catalyst. X-ray diffraction analysis (XRD), CO pulse chemisorption, and H2 temperature programmed reduction (H2-TPR) were performed to investigate the state of active metal and interactions between particles of redispersed catalyst. It was confirmed that the dispersion and particle size of platinum, the crystal phase of the catalyst, and the reduction behavior were changed according to the oxygen treatment. As for the catalytic activity in propane dehydrogeantion, sintered PtSn catalyst treated with oxygen at 500℃ showed best activity and recovery of initial activity. It was confirm that catalyst after oxygen treatment at 500℃ showed high dispersion of Pt and decreased particle size as the results of CO pulse chemisorption and XRD of catalyst, and thus the redispersion of PtSn particles in sintered catalyst was occurred. Catalytic activity was recovered due to redispersion using oxygen treatment, and the activity recovery of the PtSn catalyst was higher than that of Pt catalyst.
-
-
고형림 ( Hyoung Lim Koh ) 한국공업화학회 2016 공업화학 Vol.27 No.2
최근 셰일가스의 개발로 프로판, 부탄과 같은 경질알칸으로부터 프로필렌, 부텐, 부타디엔과 같은 올레핀을 제조하는 탈수소 공정에 대한 연구와 상용화가 많이 진행되었다. 특히 직접 탈수소화 반응의 열역학적 한계를 극복하고자 산화적 탈수소 또는 선택적 수소 산화 반응과 같이 산소를 활용한 기술의 연구개발이 진행되거나, 실제 공정에 적용된 사례들도 보고되고 있다. 이에 본 연구에서는 경질알칸의 탈수소 반응을 위한 산소활용기술의 최근 연구동향을 가스상의 산소를 활용하는 방법과 고체산화물의 격자산소를 활용한 기술로 나누어 정리하고, 산소활용기술의 현황과 연구개발 방향 및 향후 전망에 대해 고찰하였다. 반응물의 반응성에 따라 기체상 산소의 적용이 용이한 경우와 반응성의 조절을 위해 격자산소를 이용하는 기술로 분류할 수 있었고, 전환율을 높이면서 선택도를 낮추지 않는 기술의 개발이 주요한 목표가 되었다. Due to the great development made in converting the shale gas into the more valuable products, research and commercialization for production technology of olefins like propylene, butenes, butadiene from light alkanes have been intensively investigated. Especially the technology using oxygen like oxidative dehydrogenation or selective hydrogen combustion to overcome thermodynamic limit of direct dehydrogenation conversion has been extensively studied and some cases of applying this technology to the plant scale was reported. In this review, we have categorized the technology into two parts; gas phase oxygen utilization technology and lattice oxygen utilization technology. The trends, results and future direction of the technology are discussed.
-
-
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
