http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
제철산업단지 인근지역 도시대기 중 초미세먼지(PM<sub>2.5</sub>)와 미량원소 농도 특성
강병욱 ( Byung-wook Kang ),전준민 ( Jun-min Jeon ),이학성 ( Hak-sung Lee ) 한국환경기술학회 2018 한국환경기술학회지 Vol.19 No.1
본 연구에서는 광양제철산업단지 인근에 위치한 도시지역에서 초미세먼지(PM<sub>2.5</sub>)에 포함되어 있는 미량원소성분의 특성을 평가하고자 연구를 수행하였다. 연구대상지역의 초미세먼지 연평균 농도는 29.2 ㎍/㎥으로 국가대기환경기준치를 25% 초과하고 있는 것으로 나타났으며 유사한 규모의 국내 다른 도시지역과 비교하여 볼 때 산업단지로 인하여 초미세먼지 농도가 4 ~ 10 ㎍/㎥ 높은 농도를 나타내었다. 초미세먼지 중 미량원소의 농도는 S > Si > Fe > K > Na > Al > Ca 의 순서로 높게 나타나서 황 성분이 산업단지 인근지역에 영향 받는 가장 풍부한 성분으로 나타났으며 Fe와 망간의 농도도 다른 도시지역과 비교하여 고농도를 나타내어 제철산업단지의 영향으로 판단된다. 토양과 도로먼지에서 배출되는 것으로 알려진 Si, Al, Mg 그리고 Ti 등과 같은 원소는 여름에 낮고 봄철에 높은 계절 변동 패턴을 나타내었다. 반면에 인위적인 배출원에서 주로 배출되는 것으로 알려진 S, Cr, Mn, Ni, Cu 그리고 Zn 등은 계절변동을 보이지 않았으며 이는 배출원인 산업단지의 경우 연중 일정하게 배출되기 때문에 나타난 결과로 사료된다. A one-year study to evaluate the characteristics of PM<sub>2.5</sub> trace elements was performed on an urban area in the vicinity of steel industrial complexes in Gwangyang. From this study, it has been demonstrated that the annual mean concentration of PM<sub>2.5</sub> was 29.2 ㎍/㎥, which exceeds over 25% of the Korea ambient air quality standard (25 ㎍/㎥). The influence from the industrial complex near rural areas caused higher PM<sub>2.5</sub> mass (4~10 ㎍/㎥), compared to other cities. The concentration of trace elements in the PM<sub>2.5</sub> mass was in the following order: S > Si > Fe > K > Na > Al > Ca. The sulfur (S) was determined to be the most abundant species which may affected by the vicinity of industrial complexes. In parallel, the steel industrial complex is believed to be the source of high emission of iron (Fe) and manganese(Mn), where as its reading in other cities wa moderate. The elements such as Si, Al, Mg and Ti, which are the components of the soil and road dust sources, showed season-related trends; lower in the summer and higher in the spring. However, S, Cr, Mn, Ni, Cu and Zn, mainly emitted from the anthropogenic sources, were no seasonal differences, and it is proposed that constant emission from the industrial complexes is the leading source.
CMB모델 적용을 위한 대기 미세먼지(PM2.5) 중 원소분석방법에 관한 비교 연구
강병욱 ( Byung Wook Kang ),박상찬 ( Sang Chan Park ),연익준 ( Ik Jun Yeon ),전준민 ( Jun Min Jeon ),이학성 ( Hak Sung Lee ) 한국환경분석학회 2011 환경분석과 독성보건 Vol.14 No.4
This study was performed to compare the uncertainty of elemental analysis methods and the species of elements that can be analyzed using ICP (Inductively Coupled Plasma spectrometry), PIXE (Proton Induced Xray Emission), and XRF (X-Ray Fluorescence) for the PM2.5 (dp < 2.5 μm) filter samples. From this study, the XRF method has been proved to be the best way of elemental analysis for PM2.5. The XRF method has relatively detected very low uncertainty values compared to the PIXE except for Na and Mg. The number of elements measured above the limits of detection for ICP, PIXE, and XRF were 10, 12, and 23, respectively. Using the ICP method, Si, S, Zn, and Cu elements were not detected. In the case of PIXE method, the important indicator elements for the CMB (chemical mass balance) receptor model, such as Na, Mg, Cl, Cu, Br, and Ni, were not detected. However, all of these elements were detected using the XRF method.