http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영삼,윤지현,이순제,정운규,김광우 한국도로학회 2016 한국도로학회 학술발표회 논문집 Vol.2016 No.06
최근 아스팔트 포장에 빈번히 발생하는 포트홀을 보수함에 있어서 포트홀 부위를 사전 가열하기 위하 여 적외선 방출 하향식 가스히터 장비(이하 적외선 가스히터)를 사용한 공법이 사용된다. 이 보수 공법은 포트홀 발생부위 일정 구역을 적외선 가스히터로 가열하고 가열된 부분을 굴착하고 신규 아스팔트 혼합물 (New asphalt mix: NAM)과 컷백아스팔트를 넣고 비벼서 고르게 펼친 후 다지는 것이다. 이때 최종 포 설된 혼합물(보수 혼합물, Repaired asphalt mix: RAM)은 기존 포트홀 부위에서 회수된 혼합물(RAP from pothole: RFP)보다 더 회생된 상태이어야 한다. 이를 위해서는 추가되는 NAM의 노화도가 낮아야 하고, 사전가열에 의해 표변부위가 타서 노화도가 심해지는 현상이 없어야 한다. 하지만 현재 대부분 현 장의 실정은 포트홀 보수 혼합물(RFP)의 노화특성, NAM의 운반 시간에 따른 단기노화도의 변화, 적회선 heating에 따른 표면 혼합물 노화 특성변화, 최종 보수된 혼합물(RAM)의 노화도 및 회생 정도 등에 대한 정보를 모른 상태로 수행된다. 이에 본 연구에서는 일부 포트홀에 실제 보수된 혼합물의 노화정보를 GPC 를 이용하여 수집하고 최종 포설된 RAM의 상태를 절대점도로 추정하여 평가하였다. 이를 위해 RFP의 노 화특성, 운반시간에 따른 NAM의 노화특성 변화, 사전가열의 영향 등이 RAP에 미치는 영향을 평가하고 필요한 개선 방안을 일부 제시하였다.
김영삼,김수식 대한금속재료학회(대한금속학회) 1975 대한금속·재료학회지 Vol.13 No.1
炭重石을 鹽素가스로 處理할 수 있는 鹽化製鍊法의 工業的 方法의 基礎를 確立 하는데 그 目的을 두고 炭重石을 木炭의 存在下에서 鹽素가스로 鹽素化하여 良好한 收率로서 텅그스텐을 鹽素化할 수 있는 好適條件과 灰中石의 鹽素化 특징에 關하여 檢討하였다. 그 結果 鹽素가스 流量은 580cc/min., 灰重石과 木炭의 混合 몰比는 1/6, 木炭과 灰重石의 粒度는 各各 200/325 mesh, 團鑛의 크기는 5/7 mesh, 鹽素化 溫度는 700℃ 以上이 適當하다. 700℃에서 25分 동안에 100%, 800℃에서 18分동안 100%, 900℃에서 15分 동안 97%, 950℃에서 15分 동안 99%의 텅그스텐이 鹽素化되었다. 600℃ 에서 900℃ 사이의 溫度 範圍에서는 一次反應이 適用되며 灰重石의 活性化 에너지는 約 3.8 ㎉/㏖ 이었다. 반면에 500℃와 600℃ 온도 구간에서 活性化 에너지는 14.3 ㎉/㏖이었다. 溫度와 木炭 混合比를 適當히 조절하므로서 WO₂Cl₂만을 또한 WOCl₄만을 얻을 수 있다. This study aimed at obtaining some basic knowledge on the chlorination characteristics of synthetic scheelite. Favorable conditions were found to be the chlorine flow rate 580cc/min, mole ratio of scheelite to charcoal 1/6, particle size of scheelite and charcoal 200/325 mesh respectively, briquette size 5/7 mesh, and chlorination temperatures higher than 700℃. The chlorination could be described as the first order reaction, and the activation energies under such conditions were estimated to be 14.3 ㎉/mole and 3.8 ㎉/mole respectively in the temperature range of 500-600℃ and 600℃-900℃. This large difference in activation energy may be attributed to the change in reaction pass with varying reaction temperature. Two kinds of tungsten oxychloride such as WO₂Cl₂ and WOCl₄ were obtained as the products and each could be particularly formed with suitable selection of the temperature and the scheelite to charcoal mixing ratio.
김영삼,한천구 한국구조물진단유지관리공학회 2013 한국구조물진단유지관리공학회 논문집 Vol.17 No.6
비노출형 도막방수재 도포 후 누름콘크리트 타설 시기에 따른 도막방수재의 물리적 특성과 바탕면 조건, 도막두께 및 보강포 사용유무에 따른 내피로성을 검토하였는데, 누름콘크리트 타설 시기가 짧을수록 변색이 심하였고, 도막두께가 두꺼운 반면 인장성능이 낮았다. 내피로 성능은 3 mm의 도막두께에서는 파단되지 않았으나 1, 2 mm는 모두 파단 되었고 부직포로 보강한 경우의 내피로성능이 상대적으로 우수한 것으로 나타났다. This study is for quality standard establishment of urethane waterproofing membrane method which is mostly applied to waterproofing method for underground parking lot and rooftop. The experiments were carried out on color differences, membrane thickness, tensile property by curing period of liquid urethane before placing protective concrete, and resistance of crack movement according to different substrate surface and reinforcement of non-woven fabric. As a result of experiments, it was found that color differences is increase, membrane thickness is thick, tensile property is low as concrete placing period is shorter. In the fatigue property, membrane thickness of 3 mm was not broken, but 1~2 mm was broken and in the case of the membrane reinforced with non-woven fabric was more stable comparatively non-reinforcement one.