http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주조용 Zn-Al-2% Cu 합금의 기계적 성질과 Dendrite 형태에 미치는 Al 의 영향
최상호,강춘식 대한금속재료학회(대한금속학회) 1979 대한금속·재료학회지 Vol.17 No.6
주조용 Zn-Al-2% Cu 합금의 실험 결과로 얻어진 기계적 성질과 dendrite 형태에 미치는 영향은 다음과 같다. 1. Al 함량이 16%에서 19%, 22%로 증가함에 따라 인장강도는 33㎏/㎟, 31㎏/㎟, 29㎏/㎟로 줄어 들며 Al 함량이 22%에서 28%까지 증가함에 따라 인장강도는 37㎏/㎟까지 급증한다. 2. Al 조성 22%에서 가공경화능 표시지수 n´는 2.05이며 Al 조성의 증가 또는 감소에 따라 n´는 2.12까지 증가한다. 3. Al은 13∼22%에서 1차 dendrite의 성장을 크게하고 19%에서 가장 현저하며 그 이상의 조성에서는 1차 dendrite의 성장이 억제된다. The effect of aluminium contents on the mechanical properties and dendritic morphology in Zn-Al-2% Cu casting alloys has been investigated experimentally. The results obtained from this study are summarized as follow. 1. Tensile strength is decreased from 33㎏/㎟ to 29㎏/㎟ with the addition of 16, 19, 22% Al and increased from 29㎏/㎟ to 37㎏/㎟ with the addition of 22, 25, 28% Al. 2. Work hardening index (n´) is 2.05 in 22% Al and is increased slightly as the Al content increase or decrease from 22% Al. 3. The primary arm length of dendrite is increased with the addition of 13-22% Al and the other contents of Al constrain primary arm length growth of dendrite. 4. Tensile strength is increased with the secondary arm length increasing of dendrite
NaA 제올라이트 막에의한 이소프로필 알코올 수용액의 탈수 분리 특성
최상호,김재홍,이석기,박현휘 한국막학회 2002 멤브레인 Vol.12 No.3
본 연구에서는 반도체 세정공정에서 발생되는 IPA를 재활용하기 위하여 NaA 제올라이트 막을 이용한 투과증발 공정을 검토하기 위한 기초실험을 수행하였다. 공정에 사용한 NaA 제올라이트 막은 전 농도 범위에서 우수한 분리성능을 보였고, 고온조작에서도 분리성능이 매우 우수하였다. 조작온도 80에서 공급원액의 농도가 90 wt%일 때, 투과유속은 약 1,500 g/m2/hr, 분리계수는 1,000 이상을 얻을 수 있었다. 또한, 연속조작에서 IPA의 탈수농축에 따른 평균 투과유속은 약 1,000 g/m2/hr를 얻을 수 있었다. This study was carried out the fundamental experiment to investigate the pervaporation process through NaA zeolite membrane for recycling the wasted isopropyl alcohol(IPA) in semiconductor cleaning processes. The NaA zeolite membrane used showed the excellent separation performance for full range of feed concentration and at high temperature operation. At 80 in operation temperature and 90 wt% IPA in feed concentration, the separation performance was obtained about 1,500 g/m2/hr in the permeation flux and more than 1,000 in the separation factor. In continuous operation of dehydration of IPA, the average permeation flux was obtained about 1,000 g/m2/hr at 80 and 90 wt% IPA feed concentration.