한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

인천지역 TDI 노출 작업자에서 직업성천식 유병율

김형렬,김철우,홍윤철,전형준,김치년,김현수,이지나,신주연,고동희,노재훈 大韓産業醫學會 2004 대한직업환경의학회지 Vol.16 No.2

목적 : TDI는 직업성천식을 일으키는 대표적인 물질로 알려져 있다. 과거 TDI에 노출된 작업자들의 천식 발생률을 5~6%가량 보고하였고, 국내에서도 2-20%에 이르는 유병율을 보고한바 있다. 작업환경이 많이 개선되고, 노출량이 감소된 최근에도 TDI에 의한 직업성천식에 대한 보고가 많이 이루어지고 있어, 이에 대한 적극적인 조사와 진단과정을 통해 유병율을 구하고 질병발생의 변화양상을 파악해 보고자 하였다. 방법 : 인천지역에서 특수건강진단을 수행하는 2개 기관의 TDI 노출 근로자 400여명 중, 사업장의 규모가 50인 이상이며 사업주가 연구진행을 허락한 사업장에서 근무하는 근로자 중 직접적으로 TDI에 노출되는 작업에 종사하는 근로자 170명을 연구대상으로 하였다. 이들에 대해 설문지와 산업의학의사의 면담을 통한 작업관련성 평가를 근거로 정밀대상자를 선정하고 이들에 대해 메타콜린 유발시험, TDI 유발시험 등을 수행하여 직업성천식을 확인하였다. 결과 : 설문조사 결과 11명이 직업과 관련하여 천식증상을 보이는 것으로 나타났고(6.9%), 이중 7명에서 메타콜린 유발검사 양성소견을 보였다. TDI에 의한 특이유발시험 결과 1명에서 양성반응이 나타나, 이 집단에서 TDI에 의한 직업성천식의 유병율은 0.58%였다. 결론 : 과거 국내연구에서 TDI에 의한 직업성천식의 유병율이 2~20%에 이르렀던 데 비해, 본 연구에서는 0.58%로 나타났다. 이는 국외 논문에서도 나타나는 경향으로 작업장 노출량 감소로 점차 발생률이 감소하는 양상을 보이고 있다. 그러나 이미 증상이 나타난 근로자들이 부서를 옮기거나, 직장을 그만둠으로 인해 그 유병율이 과소평가되었을 가능성도 있다고 판단된다. Objecdives: This study was carried out to estimate the prevalence of isocyanate-induced occupational asthma in toluene diisocyanate (TDI) exposed workers. Methods: We examined 170 workers who had been directly exposed to TDI through a medical questionnaire, physical examination, and pulmonary function test. Based on screening examination, workers with suspected occupational asthma were selected for further evaluation such as methacholine and TDI challenge tests. Results: Eleven (6.9%) among 170 workers complained of symptoms of occupational asthma. and 7 among these 11 symptomatic workers showed positive responses to the methacholine challenge test (4.1 %). One spray painter was confirmed as having the TDI induced occupational asthma following a positive response to TDI challenge test. Conclusions: The prevalence of TDI-induced asthma was at 0.58% was lower than that for former studies (2-20%). Improved workplace environment, lower level of TDI exposure compared to the past, and the healthy workers effect may have contributed to this low rate of asthma prevalence in workers with TDI exposure.

한국인 배자 및 태아에서 유치 발생의 조직학적 변화

김희진,임희식,최병재,오현주,박형우 大韓小兒齒科學會 1998 大韓小兒齒科學會誌 Vol.25 No.2

Tooth development is usually described in four stages such as bud stage, cap stage, bell stage and crown stage. Exact time of appearance of tooth primordia is different among reports, and up to now there is no timetable regarding initial tooth development. To understand the congenital malformations and other disorders of the orofacial region, there is need to establish a standard timetable of early tooth development. Till now, studies on the tooth development were mainly on later fetuses, and only few reports on early stage. Also, there were no reports on the time when bud stage turns to cap stage, and cap stage to bell stage. In this study, external morphology of face and the early development of the tooth, and transition of bud stage to cap stage, cap stage to bell stage were studied using 27 staged human embryos and 9 serially sectioned human fetuses. the results are as follows : 1. Mandibular region was formed by union of both mandibular arch at stage 15, and maxillary region by union of maxillary arch, medial nasal prominence, and intermaxillary segment at stage 19. 2. Ectodermal thickening which represents the primordia of tooth appeared in mandibular region at stage 13, and maxillary region at stage 15. 3. Bud stage began from mandibular primary central incisor at stage 17, and maxillary primary central incisor at stage 18. And the sequence of appearance was in the mandibular primary lateral incisor at stage 19, maxillary primary lateral incisor at stage 20, mandibular primary canine at stage 22, maxillary primary canine and primary first molar at stage 23, madibular primary first molar and maxillary primary second molar at 9th week, and mandibular primary second molar at 10th week of development. 4. cap stage began from the primary anterior teeth at 9th week, and primary second molar still had the characteristics of cap stage at 12th week of development. 5. Transition to bell stage started from the primary anterior teeth at 12th week, and primary second molar started at 16th week of development. 6. Trnasition to crown stage started from primary anterior teeth at 16th week, and primary second molar at 26th week of development.

토오크 측정 장치 개발

김교형,조우석 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.2

In this paper torque control system of screw fastener by strain gauge is investigated. Strain gauge sensor applicable to screw fasterner is designed and fabricated. Through the experiments the developed system has showed good screw fasterning capability. Industrial application of the developed system can be expected in terms of productivity increase and quality improvement of assembly lines.

분말야금법으로 제조된 2124AI 합금의 빠른변형률속도 초소성 거동

金祐塡,張勝彦,南勝義,金亨駿 弘益大學校 科學基術硏究所 1999 科學技術硏究論文集 Vol.10 No.2

Ceramic whisker or particulate reinforced aluminum based metal matrix composites show high room temperature strength, but their low formability makes it difficult to form into desired shapes. By superplastic deformation, their formability can be improved and it is possible to produce complex parts for automotive aerospace simultaneously instead of many near-net-shape forming operations. This study has been carried out to investigate the high temperature mechanical and superplastic properties in 2124Al alloy. SRC(Strain Rate Change) tests show that the value of n(stress exponent) is around 3 at high strain rate and above 5 at low strain rate. It was turned out that 212Al matrix alloy exhibited reasonably high tensile elongation above 250% with the broad range of temperature and strain rate. Especially, at 550℃, both materials showed very high elongation failure up to 700% for 2124Al alloy. The strength comparison is lower strength then 2124Al composites were obtained that the composite is lower strength than 2124Al alloy at superplastic region.

카네기 발생 20기의 사람 배자

김현,김호정,박형우 대한췌담도연구회 2000 대한췌담도연구회지 Vol.5 No.4

톨루엔 노출 근로자에서 요중마뇨산 배설농도로 평가한 호흡보호구 착용효과에 관한 연구

김범석,박정일,임현우,김형아,오상용 大韓産業醫學會 2001 대한직업환경의학회지 Vol.13 No.4

목적 : 보호구 착용 효과에 대한 실제적, 구체적자료를 제시함으로서 예방목적의 보호구 사용에 대한 근로자들의 인식을 제고시키기 위함이다. 방법 : 서울시내에 소재한 일부 그라비아 인쇄소에서 톨루엔이 함유된 잉크 및 희석제를 취급하는근로자 26명을 대상으로 본 연구를 수행하였다. 유기가스용 방독마스크 미착용 상태와 유기가스용 방독마스크 착용후 작업환경 중 톨루엔 개인노출농도와 요중 마뇨산 시간별 농도를 측정, 비교하였다. 결과 : 그라비아 인쇄소의 공기중 톨루엔 개인노출농도는 유기가스용 방독마스크 미착용일과 착용일에서 각각 147.52+57.34 ppm 및 134.55+52.44ppm으로 통계학적으로 유의한 차이는 없었다. 방독마스크 미착용일파 착몽일의 작업종료 후 요중 마뇨산 농도의 기하평균값은 각각 1.5) 10.33:1 g/L 및0.49(0.14) 하였으며 두 일간에 유의한 차이를 보였단. 방독마스크 미착용일에서 요중 마뇨산 농도는 근무시작 4시간 후(오후 작업시작전, 13:00)부터 유의하게 증가하기 시작하였으며, 착용일에서는 근무종료시까지 유의한 증가를 보이지 않았다. 유기가스용 방독마스크 착용 효과를 톨루엔 대사산물인 요중마뇨산 농도로 평가하면 착용시 농도가 미착용시에비하여 89.3% 감소하였다. 보호구 미착용일에 있어서 공기중 톨루엔 개인노출농도와 요중 마뇨산 농도는 유의한 상관성을 나타났으며 회귀방정식은 Y(요중 마뇨산, g/L) =0. OO7x (공기중 톨루엔, ppm)+0.665로 계산되었다. 결론 : Fit Test등 올바른 보호구 착용 교육을 통한 전 작업시간에 걸친 유기가스용 방독마스크 보호구 착용은 직업적인 톨루엔 노출의 호흡기 흡수를거의 대부분 차단하였다. Objectives : This study was carried out in order to raise workers' recognition of the effects of respirator use by providing concrete and practical data. Methods : Twenty-six workers who dealt with toluene based ink and diluents at a gravure printing office in Seoul were investigated. The toluene exposure level and urinary hippuric acid level were monitored under respirator non-wearing (RNW) and under respiratory wearing (RW) conditions. Results : The mean concentrations of toluene exposed to each worker through the air of gravure printing office were 147.52±57.34 and 134.55±52.44 ppm on respirator non-wearing day and respirator wearing day, respectively. There was no significant difference in toluene exposure concentration for the two days. The mean concentration of urinary hippuric acid in RNW and RW groups were 1.51 (0.53) g/L and 0.49 (0.14) g/L, respectively, as measured at the end of the workday. There was a significant difference seen in urinary hippuric acid concentration between the two days. The urinary hippuric acid concentration began to increase at 4 hours after the start of the workday (13:00) in RNW. However, there was no significant increase until the end of the workday in the case of RW. The urinary hippuric acid concentration in RW reduced 89.3% as compared with the concentration seen in RNW. There was a significant correlation between the toluene concentration and the urinary hippuric acid concentration in RNW. The regression equation was Y (urinary hippuric acid concentration, g/L) = 0.007 ×χ(toluene concentration in the air, ppm) + 0.665. Conclusions : Our results indicate that the respirator intercepted most toluene that may have been absorbed Into the respiratory organs, and suggested that properly wearing a respiratory such as wearing the respirator during the entire workday and performing a proper fit test played an important role in the protection from toluene exposure

저 소음/저 진동 철도 감속기 개발에 대한 연구

김인환,허남수,이형우 진주산업대학교 산업과학기술연구소 2003 산업과학기술연구소보 Vol.- No.10

A dynamic model of railway reduction is developed by the lumped parameter method. The model accounts for shafts, bearings flexibilities, gyroscopic effects and the force couplings among the transverse and torsion motions due to gearing. Excitation forces of railway reduction are considered as the mass unbalance of the rotors and a function of gear transmission error which comes from the modified tooth surface. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors and the transmittea errors of the gearing are considered, shows that, at the operating speed, there are not the critical speed The program which can be used to analyze and predict the vibrational characteristics by mass unbalance and gear transmission error of railway reduction is developed with this system model.

제조업체 광물성분진의 총분진, 흡입성분진, 흉곽성분진과 호흡성분진의 농도

김용우,피영규,김현욱,김형아 가톨릭대학교 산업의학센터 2000 韓國의 産業醫學 Vol.39 No.2

This study was designed to estimate particle size distribution of airborne dust by an 8-stage cascade impactor, to compare concentrations of total dust by 37mm closed-face cassette with total dust, thoracic particle mass(TPM), inhalable particle mass(IPM) concentrations by an 8-stage cascade impactor and to estimate concentrations of respirable dust collected by cyclone in manufacturing factories. Total 85 sites in 44 factories were sampled from August 1, 1996 to December 31, 1997. The results were as follows: 1.The geometric mean concentration of total dust collected by 37mm closed-face cassette were 0.27-1.44 mg/㎥. The GM concentrations of total dust by impactor were 0.82-2.85 mg/㎥, of inhalable dust 0.63-2.24 mg/㎥, and of thoracic dust were 0.31-1.40 mg/㎥, respectively. 2.The analysis of particle size distribution showed bimodal patterns for almost all sampling sites studied. Geometric mean(GSD) diameters of the small mode were 0.515(1.577) ㎛ - 3.032(13.698) ㎛, while the large mode were 11.873(2.460) ㎛ - 19.774(2.606) ㎛, respectively. 3.The geometric mean(GSD) concentrations of respirable dust collected by cyclone were 0.08-0.46 mg/㎥. To evaluate health hazards from mineral dusts occurring in manufacturing industries, these results suggest the necessity of promulgating particle size-selective limit values and sampling methods such as IPM, TPM, and RPM.

인간 배자 두경부의 외형 발생에 관한 연구

박형우,이규석,김원규 대한해부학회 1992 Anatomy & Cell Biology Vol.25 No.3