Correction: Rewritable full-color computer-generated holograms based on color-selective diffractive optical components including phase-change materials

Hwang, Chi-Young,Kim, Gi Heon,Yang, Jong-Heon,Hwang, Chi-Sun,Cho, Seong M.,Lee, Won-Jae,Pi, Jae-Eun,Choi, Ji Hun,Choi, Kyunghee,Kim, Hee-Ok,Lee, Seung-Yeol,Kim, Yong-Hae The Royal Society of Chemistry 2018 Nanoscale Vol.10 No.47

<P>Correction for ‘Rewritable full-color computer-generated holograms based on color-selective diffractive optical components including phase-change materials’ by Chi-Young Hwang <I>et al.</I>, <I>Nanoscale</I>, 2018, DOI: 10.1039/c8nr04471f.</P>

포스트 모더니즘 의류광고에 대한 소비자 반응연구

원을지(Ul Chi Won),이선재(Sun Jae Lee) 한국복식학회 1999 服飾 Vol.46 No.-

The fashion advertisement is communication method between clothing and consumer. The development of mass communication accelerated that In modern society Post-modernism advertisement is a specialized and separated form so it confuses the consumers who are used in traditional AD. The peculiarities (non-form, destruction of description, compound of genre, mixing of reality and fiction) are more reflected in fashion advertisement. The sample consisted of 425 mail and female and the results were analyzed using frequency and percentage calculation, Close tabs, T-Test, Oneway Anova, Factor analysis, Chi-square Test, Regression, Correlation Analysis. The result of this study were as follows: The post-modernism fashion ad is the separated and reflected form for young age`s favorite. By the factor analysis of consumer response in each 5 emotional factors proved to be valid ones(fine, negative, sexual, stimulative, constructive aspects). The fine and negative aspects of the factors are very concerned with the consumer`s favorite attitude of fashion ad. There is no significant difference in age, job but sex has a significant difference. In according to the method of the ad expression consumer`s acceptance is difference in sex. There were no significant concern with excess effects and purchase intend in fashion advertisement.

절수에 의한 Mongolian Gerbil 장기중량변화에 관한 분석연구

김무강,이기훈,이강이,송치원,이경열,권효정,박미선,정승혁,이행연,김명철 충남대학교 수의과대학 동물의과학연구소 2000 動物醫科學硏究誌 Vol.8 No.-

In this study, authors measured the each organ weight of the long term water deprived Mongolian gerbil, after then we calculated the mean, standard deviation, variance coefficient of the real measured organ weight and induced the organ weight change quantity, rate of quantity, deviation between measured and theological organ weight, deviation rate, sum of deviation rate, organ weight change rate, rate of organ weight by the mathematical formula. The results obtained as follow 1. The weight of the brains, lung, and testis were abruptly decreased after water deprived until the 5th day, after then slowly decreased until the 20th day. 2. The weight of the heart was decreased gradually from the first day until the 20th day. 3. The weight of the liver was abruptly decreased until the 10th day, after then the more slowly decreased until the 20th day. 4. The weight of the thymus, spleen, kidney, and pancreas were abruptly decreased until the 15th day, after then increased slowly until 20th day but the weight of the kidney was abruptly increased from the 10th day. 5. The organ weight change rate and the rate of the each day organ weight were very diversified.

복합재료 샌드위치 판의 고유 진동수에 대한 탄성보의 영향

이봉학,원치문,이정호,김성환 江原大學校 産業技術硏究所 1997 産業技術硏究 Vol.17 No.-

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as special orthotropic plate to obtain more accurate result. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation on the natural frequency is thoroughly studied.

안면신경초종의 수술적 치료

이원상,지장훈,전영명,박기현 대한이비인후과학회 1999 대한이비인후과학회지 두경부외과학 Vol.42 No.7

절수에 의한 mongolian gerbil의 체중 변화에 관한 연구

이경열,송치원,김무강,조성환,류시윤,김상근,박배근 충남대학교 수의과대학 동물의과학연구소 1996 動物醫科學硏究誌 Vol.4 No.-

Recently, the mongolian gerbils have been used in neurology and the study of water metabolism because of their easy onset of epileptic seizure and typical resistance to water deprivation. The sebaceous glands which are under the control of the gonadal hrmones are differently developed from the other laboratory animals. However the physiological data on the changes of body weight following water deprivation in mongolian gerbils is not available until now. In order to investigate the effect of the water deprivation on the body weight, the animals were deprived of water for 15 days. The body weights were measured daily by the torsion balance. The mean, the standard deviation, the standard error and the coefficient of variance of the body weights were calculated. The correlation was examined. The potential regression equation was y = 61.5458 - 2.0533 * x + 0.0487 * x^2. The regression coefficient was 0.993. The results obtained were as follows : 1. The body weights of the mongolian gerbils were continuously decrased from the 1st day to the 15th day after the water deprivation. 2. The mean body weight on the water deprivation was 63.0±7.00g and that at the 15th day was 41.4 ± 5.42g. 3. The coefficients of the variance showed the highest (13.09) at the 15th day and the lowest (10.10) at the 10th day. the coefficients of the variance kept decreasing until the 10th day and thereafter gradually increased until the 15th day. 4. The changing rate of the body weight kept continuously decreasing from the 1st day to the 15th day showing the daily loss of 1.0 - 3.3%. 5.The deviations (M - QBW) between the measured values (m) and the theorical values (QBW) using the regression equation showed the highest (1.494) at the 1st day and the lowest (0.053) at the 13th day. 6. The sum of the devitions was 0.179 and that of the deviation square was 1.15. The sum of the deviation rates between the mesaured body weights and the theorical ones was 0.484. 7. The daily body weight loss showed the highest at the 1st day by 2.053g and the lowest at the 15th day by 0.591g. 8. The specific body weight changing rates which were the rate of the body weight changing velocity to the changed body weight were decreased from 0.033% at the 1st day to 0.014% at the 15th day.

공정제어에의 應用을 위한 마이크로 콤퓨터 시스템의 개발

李秀東,禹治水,李泰鎬,朴源深,黃德浩 울산대학교 1978 연구논문집 Vol.9 No.2

마이크로 프로세서를 이용한 디지탈 공정제어 수단이 고찰되었다. 관심의 초점은 분산-종합제어에 적합한 단말제어 프로세서에 두었다. 시험 제작된 프로세서는 8개의 제어 루우프를 운전하는 독립된 제어장치이며 동시에 종합제어를 위하여 상위 전산기와 데이타 교환이 가능하도록 설계 되었다. 주기적 샘플링에 의한 비례-적분-미분(PID)제어방식을 기본으로 하고 있으며 파라메터 값에 의하여 PI,PD등으로 축소될 수 있도록 하였다. 시험 장치에서는 주기를 2초로 하였는데 A/D변환기의 적절한 선정에 의하여 0.2초정도 까지는 쉽게 단축할 수 있다. 조작자용의 프로세서에 대한 고찰은 최소한의 기능을 가진 것에 한정하였으며 이는 실제 적용 현장과 관련하여 기능이 확장되어야 할 것이다. 사용된 마이크로 프로세서는 범용의 것으로 단말용에는 M6800계통을, 조작자용에는 SC/MP계통을 사용하였다. A microprocessor based digital process controller has been studied. The objective was to develope a stand-alone terminal processor for distributed on-line control systems. The prototype terminal proposed in this paper has the capability of handling eight independent control loops under the supervisory control of main computer and/or operator console. The control algorithm follows analog PID action based on periodically sampled data. The control action can also be reduced to PI,PD and so forth through parameter assignment. Availability of A/D converters to the authors limited sampling period to 2 seconds, but it could easily be reduced to 0.2 sec. employing appropriate A/D devices. The number of operational functions of console processor is kept minimum in this study, the expansion of which should be done for particular application. Hardware implementation was done with general purpose microprocessors; M6800 system for terminal and SC/MP system for console.

兒童의 表現力 伸張을 위한 글짓기 指導에 관한 硏究

李元祚,玉致坤 진주산업대학교 1992 論文集 Vol.31 No.-

오스테나이트系 스테인레스鋼의 熔接 入熱이 殘留應力과 收縮.變形量에 미치는 影響에 관한 硏究

李允景,金治遠 慶南大學校 附設 工業技術硏究所 1992 硏究論文集 Vol.10 No.-

오스테나이트系 스테인레스鋼(STS 304)은 여러가지 長點으로 인해 高級 製品의 素材로 각광을 받고 있는 반면에 또한 一般炭素鋼에 비해 낮은 熱傳導率과 큰 熱膨脹係數 때문에 鎔接施工時에 鎔接入熱에 의해 殘留應力 및 收縮, 變形量의 影響이 크게 나타난다. 이런 鎔接 施工上의 애로를 最少化하기 위해 鎔接入熱에 의해 殘留應力과 收縮 및 變形量에 대해서 검토하였다. Recently, the use of Austenite Stainless Steel has been increasing in wide applications, such as pressure vessels, heat excahngers for chemical plants, and especially component material of nuclear power plants, due to the good characteristics of high anti-corrosion, beautiful external appearance. richful dutility and high heat-resistance. etc. However, many difficulties have been encountered in the field welding and fabrication, because of the large residual stresses and shrinkage-deformations due to the heat-input during welding caused by the very low heattransfer compared with that of general carbon steel. In order to assist for the reduction of these quality problems, this study demonstrates the relationship between residual stresses and shrinkage-deformations caused by the heat-input of several typical welding processes and types of joint for Austenite Stainless Steel(STS304). And, for improving quality and satisfactory welding during field fabrication, the results of this experimental study for minimizing the residual stresses and shrinkage-deformations due to weld heat-input.

萬海 韓龍雲論 : 그의 詩를 위한 작업

李元祚,玉致坤 진주산업대학교 1985 論文集 Vol.23 No.-