소의 대동맥 내피세포에서 산화저밀도 지단백에 의한 아포프토시스에 백일해 독소 및 콜레라 독소가 미치는 영향

손호영(Ho Young Son),강성구(Sung Ku Kang),강무일(Moo Il Kang),차봉연(Bong Youn Cha),이광우(Kwang Woo Lee),장상아(Sang Ah Chang),최윤희(Yoon Hee Choi),문성대(Sung Dae Moon),안유배(Yoo Bae Ahn),손현식(Hyun Sik Son),윤건호(Kun Ho Yoon) 대한내과학회 1999 대한내과학회지 Vol.56 No.5

N/A Objectives : Oxidized LDL is thought to play a key role in atherogenesis. Among their wide variety of biological properties, oxidized LDL injures the endothelium as an early event of atherogenesis. However, the mechanisms by which oxidized LDL injures endothelial cells are not definitely known. In order to evaluate the involvement of GTP-binding protein on the mechanism of apoptosis, we studied the effects of pertussis and cholera toxin on oxidized LDL-induced apoptosis in bovine aortic endothelial cells(BAECs). Methods : Oxidized LDL elicited apoptosis in cultured BAECs as shown by characteristic morphological and biochemical changes. Chromatin condensation and nucleus fragmentation were visualized by using fluorescence microscopy of intact cells staining by acridine orange/ ethidium bromide. DNA fragmentation was quantified by an ELISA with specific antibody for bromodeoxyuridine- labelled DNA fragments and confirmed with DNA ladder formation. Results : Studies using a combination of bacterial toxins which change the function of GTP-binding protein suggest that oxidized LDL-induced apoptosis was regulated by GTP-binding protein. Oxidized LDL-induced apoptosis was not changed by pretreatment of BAECs with pertussis toxin. In contrast, pretreatment with cholera toxin completely prevented the oxidized LDL- induced apoptosis. Conclusion : These results show that oxidized LDL induces apoptosis of BAECs and suggest that cholera toxin-sensitive G-proteins are involved in signal transduction of oxidized LDL-induced apoptosis of BAEC.

급성 췌장염으로 발현된 낭성 변화를 이릉킨 종격동 부갑상선 선종 1예

이준호,최영식,박진홍,허갑도,윤설영,최소진,권태헌,이창렬,손성표,박영효 대한내분비학회 1998 Endocrinology and metabolism Vol.13 No.3

Hypercalcemia due to hyperparathyroidism is rarely associated with acute pancreatitis. But, the relationship between hypercalcemia and pancreatitis still remains controvesial. Ectopic parathyroid adenoma with cystic change is one of the rare causes of hyperparathyroidism, and is usually located in neck and mediastinum. We report a case of mediastinal parathyroid adenoma with cystic change associated with acute pancreatitis. A 54-year-old male presented with epigastric pain for 3 days. The serum calcium, phosphate, elastase were 16.8mg/dL, 1.1 mg/dL, 2772.0 ng/mL respectively and his parathyroid hormone level in serum was 651.84 pg/mL. Chest CT showed a mediastinal mass with well defined inhomogenously enhanced density located between SVC and aorta. The patient was diagnosed to hyperparathyroidism with acute pancreatitis due to mediastinal parathyroid adenoma with cystic change, and was surgically removed. The surgical biopsy showed parathyroid adenoma with cystic change. After operation his general condition was improved and serum calcium, phosphate, amylase, lipase level were normalized (J Kor Soc Endocrinol 13:473-479, 1998).

Design of a shape memory composite(SMC) using 4D printing technology

Kang, Minkyu,Pyo, Youngjun,Jang, Joon young,Park, Yunchan,Son, Yeon-Ho,Choi, MyungChan,Ha, Joo wan,Chang, Young-Wook,Lee, Caroline Sunyong Elsevier 2018 Sensors and actuators. A Physical Vol.283 No.-

<P><B>Abstract</B></P> <P>A fused deposition modeling (FDM) tool was used to fabricate a shape memory composite (SMC) that combined a shape memory alloy (SMA) with a shape memory polymer (SMP). The SMA caused a shape memory effect due to a phase change between martensite and austenite phases, in turn due to a temperature change. Also, the SMP had a shape memory effect caused by changes in the proportions of hard and soft segments near the glass transition temperature (T<SUB>g</SUB>). Usually, common SMAs and SMPs are not reversible, so these materials do not go back to their original shapes once they are deformed. In this study, we fabricated 4D printing actuator via reversible SMC actuations using 3D printing technology. Nylon 12 was used as the 3D printing material in filament form. Moreover, the volume fraction of SMA to SMP was varied to find the optimum ratio for good operation cycles. A volume fraction of SMA:SMP of 1:5 showed the largest length change, of 8 mm, and the most rapid response time, of 4 s in overall dimension of 140mm×10mm×1mm (length×width×thickness).Thus, the SMC showed promising results for the application of stents and valve controllers that could be manufactured by 3D printing technology.</P> <P><B>Highlights</B></P> <P> <UL> <LI> An 4D printed SMC actuator was fabricated using SMA and SMP with a FDM 3D printer. </LI> <LI> A volume fraction of SMA:SMP of 1:5 showed the largest length change of 8 mm, and the most rapid response time of 4 s. </LI> <LI> The reversible actuator mechanism explains the SMC actuation via each shape memory effect. </LI> <LI> SMC showed potential application for stents and valve controllers via 3D printing technology to achieve customized designs. </LI> </UL> </P>

정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

급성 췌장염으로 발현된 낭성 변화를 일으킨 종격동 부갑상선 선종 1예

권태현,박진흥,윤설영,이창렬,이준호,최소진,손성표,허갑도,최영식,박영효 성분도병원 1998 성분도병원논문집 Vol.4 No.-

미세 전기기계 시스템용 알루미늄 박막의 탄성계수 및 항복강도 평가

주영창,손동일,관동일 대한금속재료학회(대한금속학회) 2001 대한금속·재료학회지 Vol.39 No.3

Nowadays, the aluminum films have wide application in micromechanical devices such as micro sensors and actuators, so that their mechanical properties come to be very important for reliability evaluation. However, there is no standardized method to evaluate the mechanical properties of material used in MEMS (micraelectromechanical system) device since the measured mechanical properties are influenced by many factors such as surface condition, friction force, etc. Hence, we intended to evaluate the mechanical properties of thin film in our study, which is important in mechanical operation. Because MEMS devices are usually operating in elastic range, the Young's modules and yield strength were evaluated by using microcantilever beam technique. First, Al cantilever beams were fabricated using the silicon bulk micromachining technology to have various film thickness. And then, the load-displacement curve was obtained by nanoindentation method. The linear relation in elastic range was utilized in deriving the Young's modulus of Al film, which gives us reproducible result regardless of film thickness. In high load range, the deviation from the linear relation was detected, so that the yield strength of Al film could be evaluated. It is found that the yield strength increases with decreasing film thickness. By applying the misfit dislocation theory and the Hall-Petch relation, the theoretical estimation could predict well the trend of yield strength.

Self-assembly multi-layer of 1,3-bisdicyanovinylindane and its spectral sensing properties.

Park, Young-Min,Kim, Young-Sung,Kim, Byung-Soon,Lee, Chang-Soo,Son, Young-A American Scientific Publishers 2009 Journal of nanoscience and nanotechnology Vol.9 No.2

<P>The multi-layer dye film as an acid-alkali reversible sensing material has been fabricated using poly(diallyldimethylammonium chloride) (PDDAC) and 1,3-bisdicyanovinylindane dye compound by electrostatic forces and layer-by-layer self-assembly attractions. These dye layers show reversible color switchable properties. The dye shows blue colored characteristic in alkaline condition. However, when strong acidic atmospheres are subjected to colored dye structure, it converts to the colorless form of the dye structure within the multi film layers. These results were characterized using absorbance measurement and Atomic Force Microscopy (AFM). UV-vis absorption spectra of the multi-layer films increased linearly at 583 nm, which indicated that fabrication of the dye layer as a sensing moiety proceeded regularly. The dye fabrication films also clearly showed the hydrochloric gas sensing properties with reversible color changes.</P>

FEM을 이용한 GMA 용접공정의 비드형상 모델링

박창언,김일수,장영호,정영재,손준식,배수연 木浦大學校 工業技術硏究所 1997 工業技術硏究誌 Vol.7 No.-

Over the last few year, there has been a growing interest in quantitative representation of heat transfer phenomena in weld pools in order to relate the processing conditions to the quality of the weldment produced and to use this information for the optimisation and robotization of the welding process. Normally, a theoretical model offers a powerful alternative to check out the physical concepts of the welding process and to calculate the effects of varying any of parameters. To solve this problem, a transient 2D(two-dimensional) heat conduction model were developed for determining weld bead geometry and temperature distribution for the GMA welding process. The equation was solved using a general thermofluid-mechanics computer program, PHOENICS code, which is based on the SIMPLE algorithm. The simulation results showed that the calculated bead geometry from the developed model reasonablely agrees with the experiment results.

갑상선기능저하증에 동반된 가로선백색손발톱(Transverse Leukonychia)

장희선 ( Hee Sun Chang ),한태영 ( Tae Young Han ),이현경 ( Hyun Kyung Lee ),손숙자 ( Sook Ja Son ) 대한피부과학회 2011 대한피부과학회지 Vol.49 No.5

Transverse leukonychia, also termed leukonychia striata, usually occurs in association with trauma, nutritional deficiencies, exposure to toxin, and various combinations of chemotherapy. It also has been reported to be associated with various systemic diseases, including acute infection, myocardial infarction, lymphoma, hepatic failure, renal failure, and systemic lupus erythematosus. A 50-year-old woman with several months` history of nail changes presented with multiple discrete transverse white bands involving the entire width of the nail plates of her fingers. According to the patient`s medical history, she had experienced fatigue, constipation, and cold intolerance for 6 months, and antithyroid antibodies were detected before noticing these nail changes. The patient was diagnosed as having an autoimmune hypothyroidism. Repeated KOH microscopic examination did not demonstrate fungal infection. We diagnosed this case as transverse leukonychia associated with hypothyroidism. This case report underlines the possible association of transverse leukonychia with hypothyroidism. (Korean J Dermatol 2011;49(5):480∼482)

전자동 자반건조기 제작에 이용할 Water Jet의 유동해석 모델

김일수,박창언,정영재,손준식,남기우 한국공작기계학회 1998 한국생산제조학회지 Vol.7 No.5

This paper concentrates on the development of a computational design program to determine nozzle size in water jet, combing the numerical optimization technique with the flow analysis code. To achieve the above objective, a two-dimensional model was developed for investigating the fluid flow in water jet and calculating the velocity and pressure distributions. The mathematical formulation as a standard R-ε model was solved employing a general thermofluid-mechanics computer program. PHOENICS code, which is based on the Semi-Implicit Method Pressure Linked Equations (SIMPLE) algorithm. The developed code was applied to water jet design to determine the nozzle size, and investigated the effect of the change of nozzle location. Calculated results showed that the flow pattern is not changed as the change of nozzle location.