http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신보철,한상오,김주호,송지훈,송근호,이광래 강원대학교 석재복합신소재제품연구센터 2001 석재연 논문집 Vol.6 No.-
본 연구는 탄산가스화법에 의한 탄산칼슘 입자 제조 공정에 있어서, 탄산가스로 채워진 반응기에 수산화칼슘 슬러리를 분사하는 방법으로 탄산칼슘 입자를 제조하였다. 수산화 칼슘의 농도(0.25~1.0wt%), 분사압력(0.5kgf /㎠~1.5kgf /㎠) 및 반응기 온도(20℃, 28℃)의 변화에 따른 생성된 탄산칼슘을 관찰하였다. 수산화 칼슘의 농도가 비교적 높으면(0.75wt%, 1.0wt%), 생성물의 pH와 전도도는 높게 나타났다. 분사압력에 의한 탄산칼슘 제조의 변화는 분사압력이 높아질수록(1.5kgf /㎠), pH와 전도도는 높게 측정되었다. 그러나, 수산화 칼슘의 농도와 분사압력의 변화가 탄산칼슘의 입자크기, 형태, 결정구조에 영향을 미치지는 않았다. 반응기의 온도가 28℃에서 생성된 탄산칼슘은 1.0㎛이하의 칼사이트 상 입자가 제조되었으며, 20℃에서 생성된 탄산칼슘은 0.5㎛이하의 칼사이트 상 입자가 제조되었다. 반응기의 온도가 낮아질수록 탄산칼슘 입자의 크기가 작아짐을 알 수 있었다. For the preparation of calcium carbonate particles from aqueous Ca(OH)2 slurry, carbonation reaction of aqueous Ca(OH)2 slurry was carried out by spouting the aqueous slurry of Ca(OH)2 into reactor filled with CO2 gas. The concentration of Ca(OH)2 varies from 0.25wt% to 1.0wt%, nozzle pressure from 0.5kgf /㎠ to 1.5kgf /㎠, and reactor temperature were set at 20℃ and 28℃. With relatively high concentration of 0.75wt% and 1.0wt% of Ca(OH)2, pH and conductivity of product-stream were observed high value. High pH and conductivity were observed at high nozzle pressure of 1.5kgf /㎠. The concentration of Ca(OH)2 and nozzle pressure, however, did not change the particle size and shape of calcium carbonate synthesized by carbonation reaction. The reaction temperature affected particle size. At reactor temperatures of 28℃ and 20℃, the particle sizes were about 1.0㎛ and 0.5㎛, respectively. Crystal structure of calcium calcium carbonate was of calcite. When reactor temperature was lower, the size of calcium carbonate particle was smaller.
회분식 반응기에서의 공정변수 변화에 의한 침강성 탄산칼슘 제조
신보철,한상오,김주호,송지훈,송근호,이광래 江原大學校 産業技術硏究所 2001 産業技術硏究 Vol.21 No.B
For the preparation of calcium carbonate particles from aqueous Ca(OH)2 slurry, carbonation reaction of aqueous Ca(OH)2 slurry was carried out by batch method the CO2 into reactor filled with aqueous slurry of Ca(OH)2. The concentration of Ca(OH)2 varies from 1.00 to 7.00wt%, reactor temperature at 20 and 40℃, and reactor pressure from atmospheric pressure to 6.0kgf/cm2. Crystal structure of calcium carbonate was of calcite, the particle size were about 0.05 ∼2.0㎛, and the particle shape was cubic and spindle. When reactor temperature was higher, particle size of calcium carbonate was bigger and particle share was varied, but reaction rate was increased. When reactor pressure was higher, particle size of calcium carbonate was smaller, particle shape was cubic, and reaction ramie was increased.
송영보,이치훈,나오수,이영돈 濟州大學校 海洋硏究所 2002 해양과환경연구소 연구논문집 Vol.26 No.-
1995년 9월부터 1996년 8월까지 제주대학교 해양과 환경연구소가 위치한 함덕연안 조간대에서 채집한 울타리고둥, M. labio의 생식주기를 조사하기 위하여 생식소숙도지수의 변화와 생식세포 형성과정을 조직학적방법으로 조사하였다. 1. 울타리고둥의 생식소는 패각내 나선상 육질부 하단에서 꼬리돌기까지 간장부의 표면에 위치 하였다. 생식소가 성숙하면 암컷은 짙은 녹색, 수컷은 유백색을 띠고, 방출 후에는 암컷은 연갈색, 수컷은 연황색을 나타내었다. 2. 생식소숙도지수(GSI)는 암컷과 수컷 모두 수온이 상승하는 4월부터 상승하기 시작하여 9월에 암컷 0.47, 수컷 0.42로 최고치를 보이고 이후 10월부터 급격히 감소하였다. 저수온기인 1월에 GSI는 암컷과 수컷 모두 0.07로 최저치를 보였다. 3. 생식소의 발달 단계는 분열증식기(3월∼4월), 성장기(4월∼7월), 성숙기(8월∼9월) 그리고 방출 및 회복기(10월∼1월)의 연속적인 주기로 구분 할 수 있고, 주산란 시기는 10월로 추정 된다. 4. 울타리고둥, M. labio은 자웅이체로서, 성비는 약 1:1이었다(P>0.05). Reproductive cycle of thick liped monodont. Mondonta labio was invetigated by the histological observation of gonads and the gonadosomatic index(GSI). The thick liped monodont were collected at the intertidal zone of Hamdeok in Jeju-do from September, 1995 to August, 1996. Gonad of them was located o the surface of the liver below the stomachal caecum posterior spiral meat part of the shell. GSI value began to increase from May(as water temperature increased) and reached it's maximum value in September both male and female which were 0.42 and 0.47, respectively. It began to decrease from October thereafter, maintaining relatively in low value from January to March. The reproductive cycle of this species could be classified into four successive developmental stage; multiplication stage(March to April), growing stage(April to July), mature stage(August to september), spent and recovery stage(October to January). The main spawning period of M. labio appeared in October. The top shell, M. labio appeared to be gonochorism, neither sex reversal nor hermaphroditism. The sex ratio was approximately 1.0 : 1.0(P>0.05).
김주호,송지훈,신보철,한상오,송근호,이광래 江原大學校 産業技術硏究所 2001 産業技術硏究 Vol.21 No.B
Generally PbTiO3 if manufactured in a form of thin films which is useful for the application infrared sensors and non-volatile memory devices. Moreover PbTiO3 has a characteristic of adsorption for organic acid as well as electronic property. Organic acid adsorption properties of PbTiO3 powder prepared by sol-gel method was compared with the powder purchased from Aldrich Co. Crystallization and particle size of PbTiO3 are influenced by process variable, such as dilution of sol solution, catalysis, calcination temperature, calcination time, etc. As the size of PbTiO3 power decreased until several nanometers, adsorption of acetic acid and formic acid was increased 1.5-fold and 1.2-fold respectively