Implementation of a Stand-alone Photovoltaic Pumping System with Maximum Power Point Tracking

Zhao Zhengming,Chen Kunlun,Yuan Liqiang 전력전자학회 2001 ICPE(ISPE)논문집 Vol.2001 No.10

Photovoltaic (PV) pumping systems with maximum power point tracking (MPPT) technique aims at obtaining the highest possible power to the pump under various insolation and temperature, thus overcomes the mismatch between the photovoltaic panel and the pumping load. A simple method of tracking the maximum power points and forcing the system to operate close to these points is presented in this paper. The MC68HC908GP32 micro control unit (MCU) is employed to implement the proposed MPPT controller. Experimental results will also show the performances of the photovoltaic pumping system with the MPPT technique.<br/>

Assembly mechanisms of soil bacterial communities in subalpine coniferous forests on the Loess Plateau, China

Pengyu Zhao,Jinxian Liu,Tong Jia,Zhengming Luo,Cui Li,Bao-Feng Chai 한국미생물학회 2019 The journal of microbiology Vol.57 No.6

Microbial community assembly is affected by trade-offs between deterministic and stochastic processes. However, the mechanisms underlying the relative influences of the two processes remain elusive. This knowledge gap limits our ability to understand the effects of community assembly processes on microbial community structures and functions. To better understand community assembly mechanisms, the community dynamics of bacterial ecological groups were investigated based on niche breadths in 23 soil plots from subalpine coniferous forests on the Loess Plateau in Shanxi, China. Here, the overall community was divided into the ecological groups that corresponded to habitat generalists, ‘other taxa’ and specialists. Redundancy analysis based on Bray-Curtis distances (db-RDA) and multiple regression tree (MRT) analysis indicated that soil organic carbon (SOC) was a general descriptor that encompassed the environmental gradients by which the communities responded to, because it can explain more significant variations in community diversity patterns. The three ecological groups exhibited different niche optima and degrees of specialization (i.e., niche breadths) along the SOC gradient, suggesting the presence of a gradient in tolerance for environmental heterogeneity. The inferred community assembly processes varied along the SOC gradient, wherein a transition was observed from homogenizing dispersal to variable selection that reflects increasing deterministic processes. Moreover, the ecological groups were inferred to perform different community functions that varied with community composition, structure. In conclusion, these results contribute to our understanding of the trade-offs between community assembly mechanisms and the responses of community structure and function to environmental gradients.

Design Methodology for Optimal Phase-Shift Modulation of Non-Inverting Buck-Boost Converters

Bingqing Shi,Zhengming Zhao,Kai Li,Gaohui Feng,Shiqi Ji,Jiayue Zhou 전력전자학회 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.5

The non-inverting buck-boost converter (NIBB) is a step-up and step-down DC-DC converter suitable for wide-input-voltagerange applications. However, when the input voltage is close to the output voltage, the NIBB needs to operate in the buck-boost mode, causing a significant efficiency reduction since all four switches operates in the PWM mode. Considering both the current stress limitation and the efficiency optimization, a novel design methodology for the optimal phase-shift modulation of a NIBB in the buck-boost mode is proposed in this paper. Since the four switches in the NIBB form two bridges, the shifted phase between the two bridges can serve as an extra degree of freedom for performance optimization. With general phase-shift modulation, the analytic current expressions for every duty ratio, shifted phase and input voltage are derived. Then with the two key factors in the NIBB, the converter efficiency and the switch current stress, taken into account, an objective function with constraints is derived. By optimizing the derived objective function over the full input voltage range, an offline design methodology for the optimal modulation scheme is proposed for efficiency optimization on the premise of current stress limitation. Finally, the designed optimal modulation scheme is implemented on a DSPs and the design methodology is verified with experimental results on a 300V-1.5kW NIBB prototype.

Design Methodology for Optimal Phase-Shift Modulation of Non-Inverting Buck-Boost Converters

Shi, Bingqing,Zhao, Zhengming,Li, Kai,Feng, Gaohui,Ji, Shiqi,Zhou, Jiayue The Korean Institute of Power Electronics 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.5

The non-inverting buck-boost converter (NIBB) is a step-up and step-down DC-DC converter suitable for wide-input-voltage-range applications. However, when the input voltage is close to the output voltage, the NIBB needs to operate in the buck-boost mode, causing a significant efficiency reduction since all four switches operates in the PWM mode. Considering both the current stress limitation and the efficiency optimization, a novel design methodology for the optimal phase-shift modulation of a NIBB in the buck-boost mode is proposed in this paper. Since the four switches in the NIBB form two bridges, the shifted phase between the two bridges can serve as an extra degree of freedom for performance optimization. With general phase-shift modulation, the analytic current expressions for every duty ratio, shifted phase and input voltage are derived. Then with the two key factors in the NIBB, the converter efficiency and the switch current stress, taken into account, an objective function with constraints is derived. By optimizing the derived objective function over the full input voltage range, an offline design methodology for the optimal modulation scheme is proposed for efficiency optimization on the premise of current stress limitation. Finally, the designed optimal modulation scheme is implemented on a DSPs and the design methodology is verified with experimental results on a 300V-1.5kW NIBB prototype.

Tradeoff between the Output Voltage Deviation and Recovery Time of Boost Converters

Ge, Junjie,Yuan, Liqiang,Zhao, Zhengming,Lu, Ting,He, Fanbo,Feng, Gaohui The Korean Institute of Power Electronics 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

The time-optimal control for boost converters can achieve the minimum recovery time. However, their output voltage deviation is quite large. Since the minimum output voltage deviation and minimum recovery time cannot be obtained at the same time, a novel energy control is proposed to achieve a superior tradeoff between them in this paper. The peak value of the inductor current can be decreased as well. Its control parameter is easy to choose. When compared with the conventional control methods, the proposed control shows a better dynamic performance. Experimental results, which are in agreement with the theoretical analysis, are provided to verify the proposed control method.

Transient Performance Improvement in the Boundary Control of Boost Converters using Synthetic Optimized Trajectory

Gaohui Feng,Liqiang Yuan,Zhengming Zhao,Junjie Ge,Xiuxi Ye,Ting Lu 전력전자학회 2016 JOURNAL OF POWER ELECTRONICS Vol.16 No.2

This paper focuses on an improvement in the transient performance of Boost converters when the load changes abruptly. This is achieved on the basis of the nature trajectory in Boost converters. Three key aspects of the transient performance are analyzed including the storage energy change law in the inductors and capacitors of converters during the transient process, the ideal minimum voltage deviation in the transient process, and the minimum voltage deviation control trajectory. The changing relationship curve between the voltage deviation and the recovery time is depicted through analysis and simulations when the load suddenly increases. In addition, the relationship curve between the current fluctuation and the recovery time is obtained when the load suddenly decreases. Considering the aspects of an increasing and decreasing load, this paper proposes the transient performance synthetic optimized trajectory and control laws. Through simulation and experimental results, the transient performances are compared with the other typical three control methods, and the ability of proposed synthetic trajectory and control law to achieve optimal transient performance is verified.

Transient Performance Improvement in the Boundary Control of Boost Converters using Synthetic Optimized Trajectory

Feng, Gaohui,Yuan, Liqiang,Zhao, Zhengming,Ge, Junjie,Ye, Xiuxi,Lu, Ting The Korean Institute of Power Electronics 2016 JOURNAL OF POWER ELECTRONICS Vol.16 No.2

This paper focuses on an improvement in the transient performance of Boost converters when the load changes abruptly. This is achieved on the basis of the nature trajectory in Boost converters. Three key aspects of the transient performance are analyzed including the storage energy change law in the inductors and capacitors of converters during the transient process, the ideal minimum voltage deviation in the transient process, and the minimum voltage deviation control trajectory. The changing relationship curve between the voltage deviation and the recovery time is depicted through analysis and simulations when the load suddenly increases. In addition, the relationship curve between the current fluctuation and the recovery time is obtained when the load suddenly decreases. Considering the aspects of an increasing and decreasing load, this paper proposes the transient performance synthetic optimized trajectory and control laws. Through simulation and experimental results, the transient performances are compared with the other typical three control methods, and the ability of proposed synthetic trajectory and control law to achieve optimal transient performance is verified.

Tradeoff between the Output Voltage Deviation and Recovery Time of Boost Converters

Junjie Ge,Liqiang Yuan,Zhengming Zhao,Ting Lu,Fanbo He,Gaohui Feng 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

The time-optimal control for boost converters can achieve the minimum recovery time. However, their output voltage deviation is quite large. Since the minimum output voltage deviation and minimum recovery time cannot be obtained at the same time, a novel energy control is proposed to achieve a superior tradeoff between them in this paper. The peak value of the inductor current can be decreased as well. Its control parameter is easy to choose. When compared with the conventional control methods, the proposed control shows a better dynamic performance. Experimental results, which are in agreement with the theoretical analysis, are provided to verify the proposed control method.