CBCT findings of periapical cemento-osseous dysplasia: A case report

Amir Eskandarloo,Faezeh Yousefi1 대한영상치의학회 2013 Imaging Science in Dentistry Vol.43 No.3

Periapical cemento-osseous dysplasia (PCOD) is a subtype of cemento-osseous dysplasia that usually occurs in middleaged black women. This report described a case of a 45-year-old Iranian woman who was diagnosed with PCOD on the basis of cone beam computed tomographic (CBCT) findings. CBCT enabled detailed visualization of the bone changes. This report described the special radiographic characteristics of PCOD, including discontinuity of the lingual cortex on the CBCT sectional and three-dimensional images.

Position of impacted mandibular third molar in different skeletal facial types: First radiographic evaluation in a group of Iranian patients

Abbas Shokri,Majid Mahmoudzadeh,Maryam Baharvand,Hamed Mortazavi,Javad Faradmal,Samira Khajeh,Faezeh Yousefi1,Maruf Noruzi-Gangachin 대한영상치의학회 2014 Imaging Science in Dentistry Vol.44 No.1

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the β angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean βangle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, βangle showed no significant difference in different types of facial growth.. Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the β angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean βangle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, βangle showed no significant difference in different types of facial growth.

Simulating the behavior of patients who leave a public hospital emergency department without being seen by a physician: a cellular automaton and agent-based framework

Yousefi, Milad,Yousefi, Moslem,Fogliatto, F.S.,Ferreira, R.P.M.,Kim, J.H. Associação Brasileira de Divulga&cce 2018 Brazilian journal of medical and biological resear Vol.51 No.3

<P>The objective of this study was to develop an agent based modeling (ABM) framework to simulate the behavior of patients who leave a public hospital emergency department (ED) without being seen (LWBS). In doing so, the study complements computer modeling and cellular automata (CA) techniques to simulate the behavior of patients in an ED. After verifying and validating the model by comparing it with data from a real case study, the significance of four preventive policies including increasing number of triage nurses, fast-track treatment, increasing the waiting room capacity and reducing treatment time were investigated by utilizing ordinary least squares regression. After applying the preventing policies in ED, an average of 42.14% reduction in the number of patients who leave without being seen and 6.05% reduction in the average length of stay (LOS) of patients was reported. This study is the first to apply CA in an ED simulation. Comparing the average LOS before and after applying CA with actual times from emergency department information system showed an 11% improvement. The simulation results indicated that the most effective approach to reduce the rate of LWBS is applying fast-track treatment. The ABM approach represents a flexible tool that can be constructed to reflect any given environment. It is also a support system for decision-makers to assess the relative impact of control strategies.</P>

Anti-Proliferative Properties of Cornus mass Fruit in Different Human Cancer Cells

Yousefi, Bahman,Abasi, Mozhgan,Abbasi, Mehran Mesgari,Jahanban-Esfahlan, Rana Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.14

Background: There is a long standing interest in natural compounds especially those with a high polyphenolic content and high scavenging activity for hazardous free radicals. Cornus mas (CM) fruit is well known for its antioxidant activities; however, its toxicity against human cancers needs to be addressed. Here, we investigated selective anticancer effects of CM on different human cancer cells. Materials and Methods: A hydro-alcoholic extract of CM (HECM) was prepared and total phenolic content (TPC) and total flavonoid content (TFC) were determined by colorimetric assays. Antioxidant activity was assessed with respectto DPPH radical scavenging. MTT assays were used to evaluate the cytotoxicity of different doses of CM (0, 5, 20, 100, 250, 500, $1000{\mu}g/ml$) towards A549 (lung non small cell cancer), MCF-7 (breast adenocarcinoma), SKOV3 (ovarian cancer) and PC-3 (prostate adenocarcinoma) cells. Results: Significant (P<0.05) or very significant (P<0.001) differences were observed in comparison to negative controls at all tested doses ($5-1000{\mu}g/ml$). In all cancer cells, HECM reduced the cell viability to values below 26%, even at the lowest doses. In all cases, $IC_{50}$ was obtained at doses below $5{\mu}g/ml$. The mean growth inhibition was 81.8%, 81.9%, 81.6% and 79.3% in SKOV3, MCF-7, PC-3 and A549 cells, respectively. Conclusions: Altogether, to our best knowledge, this is a first study that evaluated toxicity of a HECM with high antioxidant activity in different human cancer cells in vitro. Our results indicated that a hydro-alcoholic extract of CM possesses high potency to inhibit proliferation of different tumor cells in a dose independent manner, suggesting that an optimal biological dose is more important and relevant than a maximally tolerated one.

Validity Assessment of the Persian Version of the Nordic Safety Climate Questionnaire (NOSACQ-50): A Case Study in a Steel Company

Yousefi, Yadolah,Jahangiri, Mehdi,Choobineh, Alireza,Tabatabaei, Hamidreza,Keshavarzi, Sareh,Shams, Ali,Mohammadi, Younes Occupational Safety and Health Research Institute 2016 Safety and health at work Vol.7 No.4

Background: The Nordic Safety Climate Questionnaire-50 (NOSACQ-50) was developed by a team of Nordic occupational safety researchers based on safety climate and psychological theories. The aim of this study was to develop and validate the Persian version of NOSACQ-50 and assess the score of safety climate on a group of workers in a steel company in Iran. Methods: The Persian version of NOSACQ-50 was distributed among 661 employees of a steel company in Qazvin Province (Iran). Exploratory factor analysis (EFA) and confirmatory factor analysis were used to determine the dimensions of the questionnaire. The reliability of the questionnaire was assessed using Cronbach ${\alpha}$ coefficient. Pearson correlation test was applied to investigate the correlation between different dimensions. Results: The results of EFA showed that the Persian version of NOSACQ-50 consisted of six dimensions. The Cronbach ${\alpha}$ coefficient of the questionnaire was 0.94. The mean score of safety climate in all dimensions was 2.89 (standard deviation 0.60). Conclusion: The Persian version of NOSACQ-50 had a satisfactory validity for measuring safety climate in the studied Iranian population.

Accuracy of maxillofacial prototypes fabricated by different 3-dimensional printing technologies using multi-slice and cone-beam computed tomography

Yousefi, Faezeh,Shokri, Abbas,Farhadian, Maryam,Vafaei, Fariborz,Forutan, Fereshte Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.1

Purpose: This study aimed to compare the accuracy of 3-dimensional(3D) printed models derived from multidetector computed tomography (MDCT) and cone-beam computed tomography (CBCT) systems with different fields of view (FOVs). Materials and Methods: Five human dry mandibles were used to assess the accuracy of reconstructions of anatomical landmarks, bone defects, and intra-socket dimensions by 3D printers. The measurements were made on dry mandibles using a digital caliper (gold standard). The mandibles then underwent MDCT imaging. In addition, CBCT images were obtained using Cranex 3D and NewTom 3G scanners with 2 different FOVs. The images were transferred to two 3D printers, and the digital light processing (DLP) and fused deposition modeling (FDM) techniques were used to fabricate the 3D models, respectively. The same measurements were also made on the fabricated prototypes. The values measured on the 3D models were compared with the actual values, and the differences were analyzed using the paired t-test. Results: The landmarks measured on prototypes fabricated using the FDM and DLP techniques based on all 4 imaging systems showed differences from the gold standard. No significant differences were noted between the FDM and DLP techniques. Conclusion: The 3D printers were reliable systems for maxillofacial reconstruction. In this study, scanners with smaller voxels had the highest precision, and the DLP printer showed higher accuracy in reconstructing the maxillofacial landmarks. It seemed that 3D reconstructions of the anterior region were overestimated, while the reconstructions of intra-socket dimensions and implant holes were slightly underestimated.

ON THE HEREDITARILY HYPERCYCLIC OPERATORS

Yousefi, Bahman,Farrokhinia, Ali Korean Mathematical Society 2006 대한수학회지 Vol.43 No.6

Let X be a separable Banach space. We give sufficient conditions under which $T:X{\rightarrow}X$ is hereditarily hypercyclic. Also, we prove that hereditarily hypercyclicity with respect to a special sequence implies the hereditarily hypercyclicity with respect to the entire sequence.

Biochemical characterization of a hemolymph phenoloxidase and its endogenous inhibitor in the larvae of an invasive moth, Cydalima perspectalis Walker (Lepidoptera: Crambidae)

Yousefi-Lardeh Leila,Zibaee Arash 한국응용곤충학회 2020 Journal of Asia-Pacific Entomology Vol.23 No.4

Phenoloxidase system is a crucial component of insect innate immunity which contribute to oxidize phenols to quinones and to generate reactive oxygen and nitrogen intermediates. In the current study, a phenoloxidase (PO) was extracted by hemocyte lysate preparation and purified through ammonium sulfate precipitation, Sepharyl G-100, and DEAE-Cellulose fast flow columns. At the end of the purification process, an enzyme was purified with a specific activity of 0.462 U/mg protein, recovery of 40.47%, purification fold of 14.43 and molecular weight of ~78.7 kDa. The optimal activity was recorded at pH 7 while the optimal temperature was recorded at 30–35 °C, 35 °C and 25–35 °C, using L-dihydroxyphenylalanine, hydroquinone, and pyrocatechol, respectively. The highest V max of PO was obtained using L-dopa while the lowest K m value was gained using hydroquinone. Among used synthetic inhibitors of ethylenediaminetetraacetic acid (EDTA), diethyldithiocarbamate (DTC), N, N,N0,N0-tetraacetic acid (EGTA) and triethylenetetramine hexaacetic acid (TTHA), EDTA and DTC inhibited more than 60% of the enzyme activity. Moreover, an endogenous phenoloxidase inhibitor (POI) was purified by twice processing of Sepharyl G-100 chromatography with the molecular weight of ~52 kDa. The IC 50 of POI was found 31.3 mg against the purified PO of C. perspectalis and led to a higher value of K m . Finally, larval injection by DTC and POI demonstrated significant inhibition of PO over the time of exposure. A comprehensive understanding of insect’s POs may better clarify the ways of their survival within infected areas and to potentially target them by specific and selective compounds.

Assessment of the accuracy of laser-scanned models and 3-dimensional rendered cone-beam computed tomographic images compared to digital caliper measurements on plaster casts

Yousefi, Faezeh,Shokri, Abbas,Zahedi, Foozie,Farhadian, Maryam Korean Academy of Oral and Maxillofacial Radiology 2021 Imaging Science in Dentistry Vol.51 No.-

Purpose: This study investigated the accuracy of laser-scanned models and 3-dimensional(3D) rendered cone-beam computed tomography (CBCT) compared to the gold standard (plaster casts) for linear measurements on dental arches. Materials and Methods: CBCT scans and plaster models from 30 patients were retrieved. Plaster models were scanned by an Emerald laser scanner (Planmeca, Helsinki, Finland). Sixteen different measurements, encompassing the mesiodistal width of teeth and both arches' length and width, were calculated using various landmarks. Linear measurements were made on laser-scanned models using Autodesk Meshmixer software v. 3.0 (Autodesk, Mill Valley, CA, USA), on 3D-rendered CBCT models using OnDemand 3D v. 1.0 (Cybermed, Seoul, Korea) and on plaster casts by a digital caliper. Descriptive statistics, the paired t-test, and intra- and inter-class correlation coefficients were used to analyze the data. Results: There were statistically significant differences between some measurements on plaster casts and laser-scanned or 3D-rendered CBCT models (P<0.05). Molar mesiodistal width and mandibular anterior arch width deviated significantly different from the gold standard in both methods. The largest mean differences of laser-scanned and 3D-rendered CBCT models compared to the gold standard were 0.12±0.23 mm and 0.42±0.53 mm, respectively. Most of the mean differences were not clinically significant. The intra- and inter-class correlation results were acceptable for all measurements(>0.830) and between observers(>0.801). Conclusion: The 3D-rendered CBCT images and laser-scanned models were useful and accurate alternatives to conventional plaster models. They could be used for clinical purposes in orthodontics and prostheses.

Simulation, analysis and optimal design of fuel tank of a locomotive

Yousefi, A. Karkhaneh,Nahvi, H.,Panahi, M. Shariat Techno-Press 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.50 No.2

In this paper, fuel tank of the locomotive ER 24 has been studied. Firstly the behavior of fuel and air during the braking time has been investigated by using a two-phase model. Then, the distribution of pressure on the surface of baffles caused by sloshing has been extracted. Also, the fuel tank has been modeled and analyzed using Finite Element Method (FEM) considering loading conditions suggested by the DIN EN 12663 standard and real boundary conditions. In each loading condition, high stressed areas have been identified. By comparing the distribution of pressure caused by sloshing phenomena and suggested loading conditions, optimization of the tank has been taken into consideration. Moreover, internal baffles have been investigated and by modifying their geometric properties, search of the design space has been done to reach the optimal tank. Then, in order to reduce the mass and manufacturing cost of the fuel tank, Non-dominated Sorting Genetic Algorithm (NSGA-II) and Artificial Neural Networks (ANNs) have been employed. It is shown that compared to the primary design, the optimized fuel tank not only provides the safety conditions, but also reduces mass and manufacturing cost by %39 and %73, respectively.