http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
변희섭 ( Hee Seop Byeon ),황교길 ( Kyo Kil Hwang ),이동환 ( Dong Hwan Lee ),황정우 ( Jung Woo Hwang ),오승원 ( Seung Won Oh ) 경상대학교 농업생명과학연구원(구 경상대학교 농업자원이용연구소) 2010 농업생명과학연구 Vol.44 No.4
인피섬유로 한지를 제조하고 남은 닥나무 목질부를 고부가치화 하기 위하여 닥나무 목질부로 제조된 파티클보드를 이용하여 탄화온도 변화에 따른 닥나무재료 우드세라믹을 제조하여 물성을 검토하였다. 밀도, 휨강도성능, 브리넬 경도, 압축강도 등은 탄화온도가 증가할수록 증가하였으며 밀도와 휨강도성능, 경도, 압축강도사이에는 유의성이 인정되는 밀접한 상관관계를 나타내었다. This study was carried out to investigate the properties of woodceramics made from woody part of Broussonetia Kazinoki at different carbonizing temperatures of 600℃, 800℃, 1000℃ and 1200℃. The physical and mechanical properties increased with increasing carbonizing temperature. The highest mean values of density, bending strength, Brinell hardness and compressive strength were 0.62g/cm3, 79 kgf/cm2, 203kgf/cm2 and 129kgf/cm2, respectively. There were close correlations between density and bending strength, Brinell hardness and compressive strength and MOE and MOR.
변희섭 ( Hee Seop Byeon ),김재민 ( Jae Min Kim ),황교길 ( Kyo Kil Hwang ),박성철 ( Seong Cheol Park ),오승원 ( Seung Won Oh ) 한국목재공학회 2010 목재공학 Vol.38 No.3
인피섬유로 한지를 제조하고 남은 닥나무 목질부를 고부가가치화 하기 위하여 닥나무 목질부로 파티클 보드를 제조하고 페놀수지 함침율 변화에 따른 닥나무재료 우드세라믹을 제조하여 물성을 검토하였다. 밀도, 휨강도성능, Brinell 경도, 압축강도 등은 수지함침량이 증가할수록 증가하였으며 밀도와 휨강도성능, 경도, 압축강도간 및 휨탄성계수와 강도간에는 유의성이 인정되는 밀접한 상관관계를 나타내었다. This study was carried out to investigate the properties of woodceramics made from woody part of Broussonetia Kazinoki at different impregnation ratios of phenolic resin of 40, 50, 60, 70%. The physical and mechanical properties increased with increasing impregnation ratio. The highest mean values of density, bending strength, Brinell hardness and compressive strength were 0.66 g/cm3, 53 kgf/cm2, 187 kgf/cm2, 126 kgf/cm2, respectively. There were close correlations between density and bending strength, Brinell hardness and compressive strength, and between MOE and MOR.
전우석 ( Woo-seok Jeon ),변희섭 ( Hee-seop Byeon ),김남훈 ( Nam-hun Kim ) 한국목재공학회 2018 목재공학 Vol.46 No.3
대나무는 생장이 빠르고, 벌목주기가 짧으며, 목재와 비교하여 가격이 저렴하다는 장점을 가지는 주요 바이오 매스 자원 중 하나이다. 따라서, 본 연구에서는 대나무재의 효율적 활용을 위한 기초자료를 수집하기 위하여, 국내산 맹종죽(Phyllostachys pubescens)의 1년생∼5년생까지 죽령별로 해부학적 특성을 광학현미경과 주사전자현미경으로 비교·분석하였다. 또한 셀룰로오스의 결정특성을 X선회절법에 의해 분석하였다. 횡단면 관찰 결과, 유관 속초의 크기는 1년생이 가장 작았으며, 2년생 이후 유사하였다. 수 부분에서 표피부로 갈수록 유관속의 분포밀도가 높았고, 유관속초의 발달 형태가 뚜렷하게 달랐다. 특히, 1년생 수 부분 유관속 중 세포간극에 인접한 유관속초가 발달 되지 않은 유관속이 드물게 출현하는 것이 관찰되었다. 구성세포 치수 측정 결과, 섬유길이는 1년생이 가장 짧았으며, 모든 년생에서 표피부가 수 부분보다 길었다. 유관속의 방사 및 접선방향 폭은 모든 년생에서 접선방향 폭이 더 컸으며, 2년생부터는 큰 차이를 보이지 않았다. 도관 직경 및 내층 두께는 1년생의 값이 가장 작았으며, 도관 직경은 2년생 이후, 내층 두께는 3년생 이후부터 유사한 값을 보였다. 상대결정화도는 모든 년생에서 표피부로 갈수록 높은 값을 보였으며, 1년생의 값이 가장 낮고, 2∼5년생은 비슷한 값을 보였다. 결론적으로, 국내산 맹종죽은 죽령별로 조직구조에 있어 정성적 및 정량적 차이가 있었으며, 2∼5년생의 특성은 비슷한 경향이 있었다. 따라서, 1년생은 미성숙한 상태이며, 2년생 이상의 대나무는 성숙한 상태로 조직구조적으로 안정된 특성을 갖는 것으로 사료된다. Bamboo is one of the major biomass resources that have many advantages such as fast growing, easy cultivation, short rotation, and a relatively lower price. In this study, the anatomical characteristics of Moso bamboo (Phyllostachys pubescens) by age from one-year-old to five-year-old were examined by optical and scanning electron microscopy. Also, the crystalline properties such as relative crystallinity and crystallite width were investigated by an X-ray diffraction method. In one-year-old bamboo xylem, a few vascular bundles showed missing bundle sheath in near the intercellular space. Moreover, one-year-old bamboo had the shortest fiber length and the smallest values in vessel diameter, width of vascular bundle, and thickness of inner layer. One-year-old bamboo also showed the smallest values in the crystallinity and crystallite width. Near epidermis samples had longer fiber length and greater vascular bundle spacing than near pith samples. Relative crystallinity and crystallite width near the epidermis were also higher than near the pith. This study revealed significant differences in qualitative and quantitative anatomical characteristics between one-year-old and two-year- or more old Moso bamboos. It is concluded that the structural differences by bamboo age can be used to differentiate the characteristics of juvenile and mature bamboo.
김현우 ( Hyun-woo Kim ),변희섭 ( Hee-seop Byeon ),김병로 ( Byung-ro Kim ) 한국목재공학회 2017 목재공학 Vol.45 No.5
본 연구는 황벽나무의 물리, 역학적 성질의 특성과 부후성을 조사하였다. 기건밀도는 실내, 외 방치한 목재에서 각각 0.41, 0.43 g/㎤로 나타났다. 전수축율 시 T/R비는 실내, 외에서 각각 1.40, 1.32로 나타났다. 흡습성은 온도 40℃ 상대습도 90% 경우 실내, 외에서 각각 16.30, 15.80%로 나타났다. 압축강도는 실내, 외에서 각각 43.81, 40.33 MPa 휨강도는 84.63, 68.80 MPa, 충격강도는 3.43, 4.00 J/㎠, 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 1년간 실내에 방치한 목재와 실외에 방치한 목재는 부후에 강하고, 또한 T/R비도 낮은 편으로 치수가 안정한 나무로 판단된다. Physical, mechanical and deteriorating properties of Phellodendron amure were investigated. Air dried density located indoor was 0.41 but 0.43 g/㎤ outdoor. In oven dry shrinkage, T/R ratio for located indoor was 1.40 but 1.32 outdoor. Hygroscopic property at 40℃ with 90% relative humidity was 16.30% for indoor and 15.80% for outdoor. Compressive strength for outdoor conditioned sample was 43.81 MPa but 40.33 MPa for indoor conditioned. Also bending strenght for outdoor conditioned was 84.63 MPa but 68.80 MPa for indoor conditioned. Impact strength was 3.43 and 4.00 J/㎠ indoor and outdoor, respectively. Hardness at cross-section was 47.92 and 49.20 MPa indoor and outdoor, respectively. With one-year conditioning at indoor or outdoor, there was no significantly different in strength properties, which came from strong resistance for deterioration. Also Phellodendron amure wood showed dimensionally stable raw material based on low T/R ratio.
이민 ( Min Lee ),박상범 ( Sang Bum Park ),변희섭 ( Hee Seop Byeon ),김종인 ( Jong In Kim ) 한국목재공학회 2014 목재공학 Vol.42 No.6
선행연구에서 다양한 목질 보드류를 열분해하여 다공질 탄화보드 제조에 성공하였고, 높은 난연성, 전자파차폐성, 원적외선방사, 폼알데하이드 흡착성, 흡음성능을 확인하였다. 본 연구에서는 경제성과 흡음성이 뛰어난 탄화 중밀도섬유판(MDF)을 선택하여 보다 높은 흡음성능을 부여하기 위해 다른 흡음재료에도 사용 중인 샌딩처리와 타공기법을 시도하였다. 또한 개선된 흡음성능을 바탕으로 실제 음향판을 제작하여 그 음향적 효과를 파악하였다. 탄화 MDF를 십자모양(타공 5개), 직사각형모양(타공 9개), 일자모양(타공 5개)으로 타공 처리한 후, 흡음률을 측정한 결과, 무처리 탄화 MDF의 흡음률은 14% 정도를 나타내었고, 직사각형모양 타공 시편이 16.01%로 흡음률이 가장 높았고 십자모양 타공 시편이 15.68%, 일자 타공 시편은 14.25%의 흡음률을 나타내어 그 효과가 미미하였다. 반면에, 탄화 MDF의 표면을 각 1, 2, 3 mm로 표면샌딩 처리후 흡음률을 측정한 결과, 무처리 시편(13%)에 비해 65% 증가한 21.7% (1 mm 샌딩), 21.83% (2 mm 샌딩), 19.37% (3 mm 샌딩)를 확인하였다. 이 결과를 바탕으로 실대형 탄화보드 복합 음향판을 제작하였으며 잔향실법으로 흡음시험한 결과 감음계수 0.45로 높은 흡음성능을 발휘하여 상업화도 가능할 것으로 판단된다. In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1,2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degreeof sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.