http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Screen Blade Turbine Impeller 의 소요동력 및 혼합특성
도동섭 한국화학공학회 1970 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.8 No.4
The power consumption and the mixing time in a 6 inch diameter stirred vessel, equipped with a 6 blade screen blade turbine impeller in its center, have been measured by means of turn-table and conductivity cells, and compared with the results of a 6 blade flat blade turbine impeller. The rotational speeds of the impeller ranged from 150 to 650 r. p. m. and the liquid viscosities ranged from 0.79 to 164 centipoises. The screen blade turbine consumed much less power than the flat blade turbine for performing the same degree of mixing in the range of the experiment though there was a decreasing tendency of the mixing efficiency for the screen blade turbine as the liquid viscosity increased. The mixing time has also been measured in a two impeller system and the results have proved that the screen blade turbine may be a promising equipment, especially for some continuous multi-stage mass transfer operations, performing better local mixing with less backmixing.
수직관내를 흐르는 유체의 현탁입자에 의한 열전달속도 증진에 관한 실험적 및 이론적 연구
도동섭,박찬진,최근오 한국화학공학회 1989 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.27 No.5
수직관의 내부를 통하여 흐르는 슬러리와 관벽간의 열전달특성을 연구하기 위하여 수직의 이중관 열교환기에서 슬러리속도와 고체입자의 크기 및 농도를 변화시켜가며 각각의 조건에 따른 열전달계수를 산출하였다. 그 결과 슬러리흐름에서의 열전달속도는 슬러리의 속도 및 입자의 농도가 증가할수록 그리고 입자의 크기가 감소할수록 증가하였으며 실험범위 전반에 걸쳐서 순수한 물의 경우보다 크게 나타났다. 이러한 현상을 설명하기 위하여 액체막으로 둘러 쌓여 있는 고체입자가 관벽과 충돌하면서 발생하는 입자표면의 액체막을 통한 열전달현상을 고려한 모델을 제시하였으며 이에 의해 현탁입자의 유동이 열전달속도에 미치는 영향을 정량적으로 설명할 수 있었다. The study on the heat transfer characteristics between tube wall and slurry flowing through the vertical tube was investigated. To calculate heat transfer coefficient, experiments were conducted by varying slurry flow rate, particle size and concentration of particles and it was found that the rate of heat transfer in the slurry flow was larger than that in the simple water flow and it increased as the slurry flow rate and concentration of particles increased and particle size decreased. A heat transfer model considering the effect of the collision of suspended solid particles with its clinging film with the surface of copper tube was proposed and from which the heat transfer characteristics could be explained very well.
수직관 내의 슬러리흐름에서 현탁입자가 물질전달에 미치는 영향
도동섭,박찬진,송석룡 한국화학공학회 1992 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.30 No.4
슬러리흐름 내에서 비활성고체입자가 물질전달속도에 미치는 영향을 연구하기 위하여 고체입자농도 5-15%의 조건하에 평행평판전극에서 ferri-cyanide의 환원반응시의 한계전류밀도를 측정하였다. 실험결과 실험범위 전반에 걸쳐서 물질전달속도는 고체입자에 의하여 증가하였고 범위 내의 가장 작은 입자 첨가시 가장 높은 슬러리속도에서 최고 1.4배까지 증진시킬 수 있었다. 이를 설명하기 위하여 고체입자주위를 둘러싸고 있는 반응물질의 경막이 전극표면의 반응속도에 영향을 미친다고 가정하여 유도한 이론식에 의하여 실험범위 전반의 경향을 잘 설명할 수 있었다.
" 현탁입자가 물질전달속도증진에 미치는 영향의 차원해석적 연구 "
도동섭,박찬진 고려대학교 공학기술연구소 1986 고려대학교 생산기술연구소 생기연논문집 Vol.22 No.1
In order to investigate the influence of suspended inert solid on the enhancement of mass transfer rate, multiple regression analysis was done for correlative equation derived from dimensional analysis of variables using limiting current density for the reduction of ferric cyanide obtained from a rotating disk electrode system. Multiple regression analysis was conducted with eight different particle surface to disk surface ratios, with Reynolds numbers in the range of 17,800-89,200 and with volume fraction of particles in the range of 0.05-0.25. It was found that the limiting current density increased with rise of Reynolds numbers and with that of volume fraction of particles, but it decreased with rise of particle surface to disk surface ratio in the range of large particle size and increased with rise of particle surface to disk surface ratio in the range of small particle size.
압력요동특성치를 이용한 유동층연소로에서 다입자계 유 , 무연탄 혼합연소특성 해석
도동섭,박태성,장현태 한국화학공학회 1999 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.37 No.6
내경 0.155 m, 높이 2.2 m의 유동층연소로에서 다입자계 유연탄과 무연탄의 혼합연소특성실험을 수행하였다. 다양한 실험조건에서 압력전달기를 이용하여 압력요동특성치를 측정하여 계산하였다. 압력요동특성치의 통계적 처리과정을 거쳐 압력요동의 표준편차, 정압력, 주진동수, cross-correlation function, power spectral density function을 계산하였다. 다입자계 유연탄과 유연탄올 대상으로 무연탄 혼합비, 석탄분포에 대하여 압력요동특성치와 배출회분입도분포, 배가스조성 등을 측정하여 연소특성을 해석하였다. 유동층연소로에서 혼합석탄의 연소특성 해석은 압력요동특성치중의 압력요동의 표준편차, 평균압력, power spectrum density function을 이용하여 층내의 연소영역 및 연소현상을 외부에서 관측할 수 있음을 알았으며, 주연소영역을 제시할 수 있었으며 연소입자의 분급현상을 측정할 수 있었다. The combustion characteristics of mixture of anthracite and bituminous coal were studied in a fluidized bed (0.155 m-I.D., 2.2 m-height). The pressure fluctuations were measured by a pressure transducer under the various operating conditions. The properties of the pressure fluctuations, such as the standard deviation of pressure fluctuations, static pressure, cross-correlation function, dominant frequency and the power spectral density function, were obtained from the statistical analysis. The pressure fluctuation properties, particle size distribution of ash and composition of flue gas were measured to interpret the combustion characteristics in a fluidized bed combustor of uniform or multi-sized particles of mixed anthracite and bituminous coal have been compared with the particle size distribution, anthracite mixing fraction. From this study, the combustion characteristics of mixed fuels in a fluidized bed combustor could be interpreted by using standard deviation of pressure fluctuation and power spectrum distribution.