http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김완두(W . D . Kim),김동진(D . J . Kim),나창운(C . Nah),이영신(Y . S . Lee) 한국고무학회 2001 엘라스토머 및 콤포지트 Vol.36 No.2
N/A The friction characteristics of natural rubber plates under various conditions including sliding speed, normal force, hardness, lubrication conditions and thickness of plate are analyzed experimentally. The frictional force and normal force are measured by a tester pin and a load cell with strain gages. Experimental results suggest that the coefficient of friction decreases with increasing the hardness of rubber and decreasing the thickness of plate. The effect of sliding speed is not significant over the speed range employed. The coefficient of friction is found to be about 0.1 under oil lubrication condition and varies from 0.9 to 3.9 under no lubrication condition.
실리카충전 스티렌-부타디엔 고무컴파운드의 균열성장 및 마모특성: 공정오일 종류의 영향
강성략 ( S. L. Kang ),이종영 ( J. Y. Lee ),고재영 ( J. Y. Go ),고영훈 ( Y. H. Go ),강신영 ( S. Kaang ),나창운 ( C. Nah ) 한국고무학회 2009 엘라스토머 및 콤포지트 Vol.44 No.4
용액중합 스티렌-부타디엔 고무 컴파운드 가교체의 균열저항성 및 마모특성에 미치는 공정오일의 영향을 조사하기 위해 방향족 고리화합물(PCA) 성분을 다량 함유하고 있는 방향족 오일과 저 PCA 오일을 선택하였다. 인장강도 및 인열강도 결과에 의하면 방향족 오일함유 컴파운드가 저 PCA 오일함유 컴파운드에 비해 우수한 물성을 나타내었다. 또한 방향족 오일함유 컴파운드가 균열저항성이 월등히 우수하였고, 특히 인열에너지가 낮은 범위에서 더 우수한 결과를 나타내었다. 마모저항특성은 마찰에너지가 낮은 범위에서는 방향족 오일함유 컴파운드가 우수한 결과를 나타낸 반면, 높은 마찰에너지 범위에서는 저 PCA 오일 함유 컴파운드가 오히려 높은 저항성을 나타내었다. Commercial grades of solution styrene-butadiene rubbers extended with high aromatic oils having high polycyclic aromatic compounds (PCA) and low PCA oils were used to study the effect of the processing oil particularly on the crack propagation resistance and frictional wear resistance of the vulcanizates. The aromatic oil based vulcanizates exhibited superior fracture behavior over the low PCA oil extended vulcanizates based on tensile and trouser tear tests. Compounds with aromatic oil showed superior crack propagation resistance compared with those containing low PCA oil, especially at the lower ranges of tearing energy. In terms of frictional wear resistance, the aromatic oil extended compounds showed superior performance particularly in the lower frictional work (Wf) range but in the higher Wf range the low PCA oil extended vulcanizates performed better.
아연 메타아크릴레이트로 보강된 발포고무 나노복합체의 발포거동, 구조 및 특성
욷팔바술리 ( U. Basuli ),이기쁨 ( G. B. Lee ),장세영 ( S. Y. Jang ),오재호 ( J. Oh ),이지홍 ( J. H. Lee ),김성철 ( S. C. Kim ),전남덕 ( N. D. Jeon ),허양일 ( Y. I. Huh ),나창운 ( C. Nah ) 한국고무학회 2012 엘라스토머 및 콤포지트 Vol.47 No.4
나노보강제의 하나인 아연 메타아크릴레이트 (ZMA)로 보강된 천연고무(NR)/부타디엔고무(BR) 블랜드에 발포제 함량을 달리하여 적용하여 발포거동을 관찰하였다. ZMA 첨가에 따라 전반적인 발포고무의 물성은 향상되었지만, 발포입자크기, 밀도, 발포도 등 발포입자의 모폴로지에는 크게 영향을 미치지 않았다. 발포제의 함량에 따라 발포고무의 기계적 물성은 크게 영향을 받는 것으로 나타났다. 발포제 함량 증가에 따라 발포도가 증가하였고, 이는 발포고무의 밀도감소로 나타났지만, 발포입자의 크기나 분산성은 크게 영향을 받지 않았다. 고함량 스티렌-부타디엔 고무(HSBR)의 영향도 함께 조사하였다. HSBR 함량 증가에 따라 발포입자의 크기는 작아졌고 분산성은 향상되었다. 발포고무는 대변형에서 에너지 흡수성이 뛰어난 것으로 나타났다. Different amounts of foaming agents were employed in natural rubber(NR)/butadiene rubber(BR) blends to understand the foaming behavior in presence of nano-reinforcing agent, zinc methacrylate (ZMA). The ZMA greatly improved most of the mechanical properties of the rubber foams, however it did not show considerable effect on the cell morphology, such as cell size, density and porosity. It was also observed that the foaming agent concentration affected all the mechanical parameters. When the content of foaming agent was increased, the number of foams was increased leading to a decrease in density of the compounds. But the size and distribution of foams remained unchanged with increased foaming agent. The effect of high styrene-butadiene rubber (HSBR) was also studied. The size of cells became smaller and the cell uniformity was improved with increasing HSBR. The foam rubber compounds showed much efficient energy absorbing capability at higher strains.