http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나재정(Jae Jeong Na),이정민(Jung Min Lee),강경택(Kyung Taik Kang) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.5
본 논문에서는 미지의 두 열물성 값인 열전도율과 열확산율을 구하기 위하여 Levenberg-Marquardt 방법에 의한 역해석 기법을 도입하였다. 일차원 열전도 문제에 대하여 연산식을 유도하였으며, 시편에 대하여 두 지점의 온도 및 입력유동의 열유속 측정값을 적용하였다. 예측된 열전도율 및 열확산율은 알려진 그라파이트 시편에 대한 열물성 값과 비교하였으며 그 결과 본 논문에서 제시된 역해석 예측 기법 실험의 유효성이 파악되었다. The objective of this study is the estimation of the two unknown thermal conductivity and thermal diffusivity by an inverse heat conduction analysis using the Levenberg-Marguardt method. One dimensional formulation of heat conduction problem in the model was applied. Two point transient temperature of test pieces and heat flux of inflow were measured under the high enthalpy flow environment. Estimated thermal conductivity and thermal diffusivity by an inverse analysis were compared with the known values of graphite test piece. It showed the effectiveness of proposed experimental inverse analysis.
나재정(Na Jae Jeong),이정민(Lee Jung Min),강경택(Kang Kyung Taik) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.11
공기흡입 엔진 부품의 고온 분출냉각 시험장치에서의 엔탈피값을 구하기 위하여, 시험부 유동에 대한 이론적 계산 및 측정을 수행하였다. 열평형 및 음속유동 방법에 의해 계산된 질량평균 엔탈피 값은 10 MJ/kg 이며, 슬러그형 구리 열량계를 사용하여 측정된 유동 중심에서의 엔탈피 값은 15MJ/kg이었다. 일반적으로, 유동 중심 대 질량평균 엔탈피 비의 범위는 1.4에서 4이다. 본 시험장치는 고온 분출냉각 시험에 효과적인 낮은 엔탈피 구배를 갖는 것으로 나타났다. In order to determine the enthalpy profile in the high temperature transpiration cooling test facility for the air-breating engine compartments, theoretical calculation and measurement for the flow of the test section are performed. The mass averaged enthalpy value determined by the heat balance and sonic throat methods is 10 MJ/kg. The centerline enthalpy value measured using the slug type copper calorimeter is 15 MJ/kg. Typically, the ratio of centerline and mass averaged enthalpy should be varies from 1.4 to 4. This facility has lower bound of enthalpy profile. It will be effective in testing of high temperature transpiration cooling.