RISS 학술연구정보서비스

검색

인기 검색어

    다국어 입력

    http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

    변환된 중국어를 복사하여 사용하시면 됩니다.

    예시)
    • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
    • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
    닫기
    KCI등재

    과부하 사각형 중간맨홀에서의 손실계수 산정 = Estimation of Head Loss Coefficients in Surcharged Rectangular Manholes

    한글로보기

    https://www.riss.kr/link?id=A110244050

    • 0

      상세조회
    • 0

      다운로드
    서지정보 열기
    • 내보내기
    • 내책장담기
    • 공유하기
    • 오류접수

    부가정보

    국문 초록 (Abstract) kakao i 다국어 번역

    과부하 조건에서 사각형 맨홀의 규격변화에 따른 에너지 손실 특성을 산정하기 위하여 수리 실험을 통해 사각형 맨홀의손실계수를 정량적으로 분석하였다. 맨홀 폭(b)과 연결관경(d)의 비(b/d, 3.0, 2.5, 2.0)와 유입유량을 변화시키면서 수두변화를측정하였다. 모든 실험 조건에서 유사한 압력수두 감소 영향을 보였으며 b/d가 클수록 맨홀에서의 에너지 손실이 증가하는것으로 나타났다. 연결관거의 평균 유속과 맨홀 수심을 이용하여 수심비(H/d) 및 b/d 변화조건에서의 손실계수를 산정하였다.
    산정 결과, 세가지 조건 모두 H/d가 1.0~1.4까지는 손실계수가 증가하다가, 이후 감소하여 수심비가 2.0이상에서는 일정한값으로 수렴하는 공통된 경향을 나타냈다. 회귀분석을 통해 산정한 평균 손실계수는 각각 0.47, 0.36, 0.33으로 산정되었다.
    본 연구 결과는 하수도 설계 및 도시침수 해석에서 사각형 중간맨홀 손실계수의 합리적인 산정을 위한 기초자료로 활용될수 있을 것이라고 판단된다.
    번역하기

    과부하 조건에서 사각형 맨홀의 규격변화에 따른 에너지 손실 특성을 산정하기 위하여 수리 실험을 통해 사각형 맨홀의손실계수를 정량적으로 분석하였다. 맨홀 폭(b)과 연결관경(d)의 비(b/d...

    과부하 조건에서 사각형 맨홀의 규격변화에 따른 에너지 손실 특성을 산정하기 위하여 수리 실험을 통해 사각형 맨홀의손실계수를 정량적으로 분석하였다. 맨홀 폭(b)과 연결관경(d)의 비(b/d, 3.0, 2.5, 2.0)와 유입유량을 변화시키면서 수두변화를측정하였다. 모든 실험 조건에서 유사한 압력수두 감소 영향을 보였으며 b/d가 클수록 맨홀에서의 에너지 손실이 증가하는것으로 나타났다. 연결관거의 평균 유속과 맨홀 수심을 이용하여 수심비(H/d) 및 b/d 변화조건에서의 손실계수를 산정하였다.
    산정 결과, 세가지 조건 모두 H/d가 1.0~1.4까지는 손실계수가 증가하다가, 이후 감소하여 수심비가 2.0이상에서는 일정한값으로 수렴하는 공통된 경향을 나타냈다. 회귀분석을 통해 산정한 평균 손실계수는 각각 0.47, 0.36, 0.33으로 산정되었다.
    본 연구 결과는 하수도 설계 및 도시침수 해석에서 사각형 중간맨홀 손실계수의 합리적인 산정을 위한 기초자료로 활용될수 있을 것이라고 판단된다.

    더보기

    다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

    The head loss coefficients of square manholes were quantitatively analyzed through a hydraulic experiment to estimate the energy loss characteristics according to the change in size of the rectangular manholes under surcharged conditions. The change in water head was measured by changing the ratio (b/d, 3.0, 2.5, 2.0) of manhole width (b) and connecting pipe diameter (d) and the inflow rate. A similar pressure head reduction effect was observed under all experimental conditions, and the larger the b/d, the greater the energy loss in the manhole. The head loss coefficients under the conditions of varying water depth ratio(H/d) and width ratio(b/d) were calculated using the average flow velocity of the connecting pipe and the manhole depth. The calculation results showed that the head loss coefficients increased for all three conditions up to H/d 1.0 to 1.4, then decreased, and converged to a constant value when the depth ratio was 2.0 or higher. The average loss coefficients calculated through regression analysis were 0.47, 0.36, and 0.33, respectively. The results of this study were expected to be used as basic data for the reasonable calculation of rectangular manhole loss coefficients in sewer design and urban flood analysis.
    번역하기

    The head loss coefficients of square manholes were quantitatively analyzed through a hydraulic experiment to estimate the energy loss characteristics according to the change in size of the rectangular manholes under surcharged conditions. The change i...

    The head loss coefficients of square manholes were quantitatively analyzed through a hydraulic experiment to estimate the energy loss characteristics according to the change in size of the rectangular manholes under surcharged conditions. The change in water head was measured by changing the ratio (b/d, 3.0, 2.5, 2.0) of manhole width (b) and connecting pipe diameter (d) and the inflow rate. A similar pressure head reduction effect was observed under all experimental conditions, and the larger the b/d, the greater the energy loss in the manhole. The head loss coefficients under the conditions of varying water depth ratio(H/d) and width ratio(b/d) were calculated using the average flow velocity of the connecting pipe and the manhole depth. The calculation results showed that the head loss coefficients increased for all three conditions up to H/d 1.0 to 1.4, then decreased, and converged to a constant value when the depth ratio was 2.0 or higher. The average loss coefficients calculated through regression analysis were 0.47, 0.36, and 0.33, respectively. The results of this study were expected to be used as basic data for the reasonable calculation of rectangular manhole loss coefficients in sewer design and urban flood analysis.

    더보기

    분석정보

    View

    상세정보조회

    0

    Usage

    원문다운로드

    0

    대출신청

    0

    복사신청

    0

    EDDS신청

    0

    동일 주제 내 활용도 TOP

    더보기

    주제

    연도별 연구동향

    연도별 활용동향

    연관논문

    연구자 네트워크맵

    공동연구자 (7)

    유사연구자 (20) 활용도상위20명

    이 자료와 함께 이용한 RISS 자료

    나만을 위한 추천자료

    해외이동버튼