동제련 슬래그의 입도 및 잔골재 치환율 변화에 따른 시멘트 모르타르의 특성|RISS 상세보기

다국어 초록 (Multilingual Abstract)

It is estimated that over 2 million tons of non-ferrous wastes are generated after refining. Up to now, most researches were focused on extracting precious metals and there were very few research on the utilization of the slag byproduct. In this study, we studied to evaluate whether copper slag could be used as aggregates in concrete. Fresh mortar were evaluated on the particle size and replacement ratio of the copper slag with river-sand. Experimental results indicated that flow, air content and drying shrinkage of concrete varied with particle size, which confirmed that proper classification of copper slag is very important. And, setting time and unit weight of the concrete increased with replacement ratio. When particle size of the slag was similar to the river-sand, concrete with copper slag showed slump, air content, setting time, drying shrinkage and unit weight became larger compared to the concrete using river-sand only. Therefore, it is believed that proper classification and replacement ratio should be optimized for the effective use of slag in concrete.

번역하기

참고문헌 (Reference)

1 이정일, "킬레이트 수지를 이용한 구리 합금 부산물에서의 니켈의 농축 및 분리" 한국결정성장학회 23 (23): 114-118, 2013

2 이정일, "구리 합금 슬래그를 혼합한 시멘트 모르타르의 특성" 한국결정성장학회 25 (25): 39-43, 2015

3 이정일, "구리 합금 부산물에서의 주석과 니켈의 분리" 한국결정성장학회 24 (24): 224-228, 2014

4 C. Shi, "Utilization of copper slag in cement and concrete" 52 : 1115-, 2008

5 I. Afshoon, "Ground copper slag as a supplementary cementing material and its influence on the fresh properties of self-consolidating concrete" 7 : 229-, 2014

6 M. Najimi, "Durability of copper slag contained concrete exposed to sulfate attack" 25 : 1895-, 2011

7 W.A. Moura, "Copper slag waste as a supplementary cementing material to concrete" 42 : 2226-, 2007

8 K.S. Al-Jabri, "Copper slag as sand replacement for high performance concrete" 31 : 483-, 2009